Vintage Full Fairings

RIC2 - RICKMAN AVON 1 PIECE LOWER

Avon Lynx lower fairing.
Fits RIC1 and RIC3. This lower fairing is fairly narrow and will only work on twins.

RD234 - RD250/350/400 STREET FAIRING

Yamaha RD350 fairing – Read Titan
Shown here is the RD 234 Street fairing, a.k.a. the Reed Titan assembly. The Reed Titan is comprised of a large one piece main upper, a belly pan, and a dash panel with a cutout for the instruments. The front area has a molded in lip for mounting a clear nose cone; small turn signals can be mounted behind the cone for a sweet custom look.

PEEL1 - PEEL FAIRING - SMALL

Ducati single Peel fairing

This one piece fairing has a nice slippery shape and is pretty wide at the top which will give you good coverage for arms and shoulders so you can tuck into that bubble. The Peel fairings were designed for the Mountain Course / Isle of Man TT and used to good effect in the US at high speed tracks like Willow Springs and Daytona.

MV3 - TEAM OBSOLETE MV TYPE3 LATE 4/CYL

MV Full Race Fairing

This full race fairing would have been seen on the later model four cylinder MV race bikes campaigned by Giacomo Agostini and his contemporaries.

OSSARR1 - OSSA ROAD RACE FAIRING

Ossa road race fairing

Headlight opening: n/a

Style: 1-piece

Lower fairing open or closed: open

Origin: Ossa Stiletto TT

Known fitment:
Small twins and singles

MM6 - MAD MAX TOECUTTER LOWER FAIRING

Mad Max Amaroo Fairing – Lower
Variation on the Goose fairing, this was the second generation of the same basic style. Softer hand cuff style lines and lower nose area. No rearsets required to install this lower fairing.

MM5 - MAD MAX TOECUTTER UPPER FAIRING

Mad Max Amaroo Fairing – upper
Variation on the Goose fairing, this was the second generation of the same basic style. Softer hand cuff style lines and lower nose area.

MM2 - MAD MAX GOOSE LOWER FAIRING

Mad Max Jim Goose / Toecutter Fairing – Lower
Matching lower to the MM1 Goose upper. Nice mounting flange for a tight seam with the upper.
The back lower edge of these fairings needs to be trimmed to match your foot controls and shoe size.
The Goose bike had rearsets and this setup requires minor trimming for clearance. If you’re using stock KZ footpegs or have feet like a Sasquatch, you’ll need to trim away more!

MM1 - MAD MAX GOOSE UPPER FAIRING

Mad Max Jim Goose / Toecutter Fairing – upper
The original upper fairing as used on both the Goose and Toecutter bike. We went to great lengths to ensure this fairing is accurate in all its details. Small inner dash lip for strength can be trimmed easily if you’re installing a CB radio.

KR1 - 63-67 HARLEY IRON KR RR FAIRING

Harley KRTT - fairing
This early KRTT fairing has a particularly round shape to it and has a fairly small windscreen. It comes in two pieces that split near the steering head. There is also a small access door on the right hand side providing access to the spark plugs.

JPN1S - 72 JPS NORTON FAIRING - STREET

Norton John Player Special factory fairing – Street
This is a copy of the JPN street fairing as manufactured by Sprint, with the dual headlight openings and large dash panel.

JPN1 - 72 JOHN PLAYER NORTON FAIRING

Norton John Player Special factory race fairing
This two piece design actually had quite good aerodynamics, with a really rounded front leading edge, large windscreen and distinctive hand cuff bubbles that covered most of the rider’s hands back behind the wrists. Quite a unique fairing for a classic early 70’s Brit Superbike.

JCF1 - John Cronshaw full race fairing

John Cronshaw full race fairing

This fairing was originally used at Daytona and works really well at high speeds. You can see the original mock up photo on the left, with some modifications drawn where we extended the fairing on the sides.

It’s very streamlined and has large bulges for your arms so you’ll really be able to get out of the wind when you’re flat on your tank. Will work and look great on big (parallel) twins or tall singles. Think Triumph, Norton, BSA, SR500, XS650, Ducati and other narrow bikes with a tall steering head heigth…

H2R1 - 73 KAW H2R FAIRING

Kawasaki H1 / H2 triple full race fairing
We offer the 73-74 Green Meanie factory road race fairing. This two piece fairing is an upper with a belly pan. Will only work with clip-on handlebars. Good thing we make ’em!

F1F1P - FORMULA 1 FAIRING 2 PIECE FAIRING

Formula 1 full race fairing

Headlight opening: n/a

Style: 2-piece

Lower fairing open or closed: closed

Known fitment:
Inline fours like Suzuki GS, Kawasaki KZ and Honda CB series.