MAD MAX

DUC74 - DUCATI 750/900SS WIDE GT TAIL SECT

Ducati 750 GT seat – GT wide line
We also offer the wide line seat, which fits on the wider GT frames.

This is the seat that was used on the Johnny the Boy bike.

DUC917 - 77/80 900SS FAIRING 7"H/LIGHT LIP

Ducati 750 Sport Half fairing – 7″ opening
This half fairing has a smaller, 7″ headlight opening with a return angling rearwards, to fit a standard 7″ automotive bulb.

This is the same shape as DUC91 but with a return lip that butts up against the headlight lens so the headlight is recessed in the fairing.

DUC91 - 77/80 900SS UPPER FAIRING

Ducati 900 SS Half fairing – 8" opening
We offer this replacement fairing with the larger headlight opening, so teh chrome ring on the headlight will protrude.

This is the half fairing that was used on the Johnny the Boy bike. The chrome lens around the headlight lens will push through the opening.

BLADE2 - WIDE BLADE FRONT FENDER

Blade style front fender – wide
The Goose bike used a standard steel front fender, but the Toecutter bike used this sharp looking "blade" style front fender, that has a flat rib over the top. Does not use the standard KZ fork mounts but attaches above it with zip ties or hose clamps.

Please note: You have two options to install these fenders on standard KZ forks (5" between dust seals):
1. You’ll have to spread open the BLADE1 fork ears substantially or
2. You can trim the BLADE2 to the narrower overall shape of the BLADE1.
Choose whichever you’re more comfortable with. Ask your sales rep if you have any questions!

Wheel size: 19"
Width: 4.75"

BLADE1 - SKINNY BLADE FRONT FENDER

Toecutter front fender
The Goose bike used a standard steel front fender, but the Toecutter bike used this sharp looking "blade" style front fender, that has a flat rib over the top. Does not use the standard KZ fork mounts but attaches above it with zip ties or hose clamps.

Please note: You have two options to install these fenders on standard KZ forks (5" between dust seals):
1. You’ll have to spread open the BLADE1 fork ears substantially or
2. You can trim the BLADE2 to the narrower overall shape of the BLADE1.
Choose whichever you’re more comfortable with. Ask your sales rep if you have any questions!

Wheel size: 19"
Width: 4.25"

MM6 - MAD MAX TOECUTTER LOWER FAIRING

Mad Max Amaroo Fairing – Lower
Variation on the Goose fairing, this was the second generation of the same basic style. Softer hand cuff style lines and lower nose area. No rearsets required to install this lower fairing.

MM5 - MAD MAX TOECUTTER UPPER FAIRING

Mad Max Amaroo Fairing – upper
Variation on the Goose fairing, this was the second generation of the same basic style. Softer hand cuff style lines and lower nose area.

MM4 - MAD MAX "GOOSE" SOLO SEAT COVER

Mad Max Jim Goose – Solo seat cowl
If you don’t want to cut the hinges off the frame, now you don’t have to! We’ve made this really cool solo seat cover that you can bolt straight to the seat pan, just like on (some of) the movie bikes – but a lot cleaner. So this seat cowl will flip up with the stock seat (tech note: make sure you have enough slack on the taillight wires!).

We put a nice flat surface underneat the rear lip for your taillight and sell a nice license plate bracket that bolts right to the rear frame mount.

The ribbed black upholstery is also available from us!

Check out our Australian customer, Rob Orchard’s Z900 with our seat cowl below.

MM3UP - MAD MAX "GOOSE" UPHOLSTERY PAN

Mad Max Jim Goose Fairing – Upholstery pan
This is the matching upholstery pan that will close the storage compartment and can be used as a base for your custom uypholstery. The recessed area locks into the opening in the tail. Usually installed with velcro.

MM3 - MAD MAX "GOOSE" TAIL W/ ENCLOSURE

Mad Max Jim Goose Fairing – Tail section
The original Goose replica tail section, not just a botched cover. This tail section has a bonded underseat enclosure with integrated seat support bracket designed for the KZ900/KZ1000 frame. The underseat enclosure forms a storage compartment in the hump and has a flat rear surface to mount your taillight and/or license plate bracket.

Length: 32"
Width front: 7.5"
Widest point: 12.25"
Seat pan: 16"
Height: 9"

MM2 - MAD MAX GOOSE LOWER FAIRING

Mad Max Jim Goose / Toecutter Fairing – Lower
Matching lower to the MM1 Goose upper. Nice mounting flange for a tight seam with the upper.
The back lower edge of these fairings needs to be trimmed to match your foot controls and shoe size.
The Goose bike had rearsets and this setup requires minor trimming for clearance. If you’re using stock KZ footpegs or have feet like a Sasquatch, you’ll need to trim away more!

MM1 - MAD MAX GOOSE UPPER FAIRING

Mad Max Jim Goose / Toecutter Fairing – upper
The original upper fairing as used on both the Goose and Toecutter bike. We went to great lengths to ensure this fairing is accurate in all its details. Small inner dash lip for strength can be trimmed easily if you’re installing a CB radio.