Vintage Full Fairings

TZ250H1 - 80/83 TZ250HJK UPPER/LOWER FAIRING

Yamaha TZ250 Race fairing
This particular setup is actually the fourth incarnation of TZ250 bodywork. It is a sculpted type of fairing of a type that showed up on all sorts of racing machines in the late 70’s and early 80’s.

The upper and the lower split around the steering head. A sidenote for history buffs: this is one of the first point nosed fairings that was flat sided and full all the way back to the rear tire. The upper features a rounded number plate area and accepts a full bubble windshield.

TZ250EFGLB - 77/79 TZ EFG LOW BOY UPPER/LOWER

Yamaha TZ250 ‘Low Boy’ Race fairing
The ‘Low Boy’ version has the windscreen angled down to approximately the rider’s shoulders, which help give it an aerodynamic advantage at fast tracks like Daytona or Road America.

The lowers are the same for both versions, flat-sided and beveled for increased ground clearance. The front is filled in to direct cooling air to the area around the cylinders.

TZ250EFG - 77/79 TZ EFG FAIRING UPPER/LOWER

Yamaha TZ250 Race fairing
We have an OEM replacement fairing TZ250EFG and our ‘Low Boy’ version TZ250EFGLB (see below) of the same assembly. Both of these are two piece designs with an upper and lower that split at the steering head. The ‘Low Boy’ version has the windscreen angled down to approximately the rider’s shoulders, which help give it an aerodynamic advantage at fast tracks like Daytona or Road America.

The lowers are the same for both versions, flat-sided and beveled for increased ground clearance. The front is filled in to direct cooling air to the area around the cylinders.

TZ250AB - 73/74 TZ250/350 A&B FAIRING UPR&LW

Yamaha TZ250 Fairing
This is the factory race fairing for the TZ250 A and B models. Comes complete with a removeable belly pan and the triangular upper insert, that fits between the forks.

TRI6 - 67/69 TRI/BSA TWINS FAIRING

Triumph / BSA race fairing
OK, OK… I know the bike says BSA on the side, but Don says it will fit Triumphs too! When speed demon Don Vesco decided to restore his championship winning 67 BSA, he came to us to repair and retool his fairing and seat. We said… ” What the hell is it going to fit?” “Anything” Don replied… So we put it on Triumphs, BSA, Ducatis and even early Yamahas.

Please note: Due to size this fairing ships in an oversize (double) box.

Mounting guideline:
Cut the fairing as shown in the picture, along the dotted line. Spread the lowers, slide the fairing onto the bike, then tuck the lip to the left of the dotted line in the picture underneath the other edge and bolt it together.

TRI4 - 70/71 TRI/BSA LETTERBOX FAIRING

Triumph ‘Letterbox’ race fairing
The latest version is the ‘letterbox’ fairing, distinguishable by the oil cooler intake in the front nose. Both of our molds were pulled from clean unchanged originals supplied by Team Obsolete. The detail work and ducting are exactly as produced almost 30 years ago. So if your looking to reproduce an exact replica or just want a cool fairing for your street bike give us a call we can help you out.

TRI3 - 69/70 TRI/BSA HIGH-BOY FAIRING

Triumph ‘Highboy’ race fairing
The earlier full fairing is the 1970 Daytona fairing for Rob North ‘Highboy’ frame and also used on Slippery Sam.

Please note: Due to size this fairing ships in an oversize (double) box.

TD32 - YAM TD3/TR3 EMDE DAYTONA FAIRING

Yamaha TD TR race fairing – Don Emde Daytona
This fairing, as used by Don Emde, is a lot wider from the handlebar area down has excellent aerodynamics, making it a perfect fairing for faster tracks like Daytona.

TD22 - YAM TD2 FAIRING UPPER/BELLI/TRIANG

Yamaha TD TR race fairing
This design is a three piece assembly with a main fairing body, which is sculpted around the dyno and ignition covers on the engine. A removable belly pan sits under the exhaust. Another removable triangle section (not pictured but included) sits behind the forks and directs cooling air to the cylinders.

TD11 - YAM TD1 FAIRING

Yamaha TD1 race fairing
Airtech’s molds for the TD 1 came from a museum-quality assembly and is accurate in every detail and size.

RR2502 - 72/76 RR250 FAIRING AIR/WATER COOL

RICCR1L - RICKMAN CR LONG FAIRING

RIC1D - RICKMAN AVON RACE FAIRING DAS

Rickman dash panel
Fits RIC1. Room for 1 gauge only.

RIC3 - RICKMAN AVON STREET UPPER

Avon Lynx upper fairing - street
This version has the headlight hole in place, large enough to work with a headlight bucket and a chrome bezel. It is the perfect thing for a restoration project, or cafe customizing job.

This fairing looks especially bitchin' with a matching clear nose cone, available through vintage windscreen specialist Gustafsson.

RIC1 - RICKMAN AVON RACE UPPER

Rickman upper fairing - competition
This is a seamless competition fairing with headlight hole filled in.

Dash panel RIC2 available below