(Image 1) MV3
(Image 2) MV3
MV3 - TEAM OBSOLETE MV TYPE3 LATE 4/CYL
Measurements, fitment, and other pictures...
MV Full Race Fairing
This full race fairing would have been seen on the later model four cylinder MV race bikes campaigned by Giacomo Agostini and his contemporaries.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) BULSDT1 - BULTACO TSS SINGL DOWN TUBE FAIRNG
(Image 2) BULSDT1 - BULTACO TSS SINGL DOWN TUBE FAIRNG
(Image 3) BULSDT1 - BULTACO TSS SINGL DOWN TUBE FAIRNG
(Image 4) BULSDT1 - BULTACO TSS SINGL DOWN TUBE FAIRNG
(Image 5) BULSDT1 - BULTACO TSS SINGL DOWN TUBE FAIRNG
BULSDT1 - BULTACO TSS SINGL DOWN TUBE FAIRNG
Bultaco TSS single downtube race fairing
The single downtube fairing is notched out to accommodate the exhaust header.
XR7504 - 72/74 (LONG CIRCUT)DISC BRAKE FAIR
HarleyXR750 fairing long circuit - disc brake
The three piece design pictured was obtained from Rob Ianucci of Team Obsolete; the molds were taken off of original, unmounted Harley Davidson parts.
Two different versions are available. The lowers are similar, but the upper differs depending on whether the bike is a drum or disc brake unit.
The disc brake version of this fairing has a much smaller and shorter dash area to make room for the massive brake master cylinder mounted on the handlebars, shown in the pictures below.
(Image 1) XR7501 - 72/74 HOURGLASS SHORT CIRCUIT
XR7501 - 72/74 HOURGLASS SHORT CIRCUIT
HarleyXR750 Hourglass fairing - short circuit - low boy
This the short race circuit fairing, also known as the hourglass fairing, which was designed for use on the low boy chassis. With its much lower steering head height, this was the preferred setup on tighter tracks. The fairing itself is actually much smaller than its long circuit counterpart -- though not quite as aerodynamic. Again, these fairings were obtained from Team Obsolete and made off of uncrashed Harley parts. It you have an XR project in the works or are building a vintage racer, Airtech can make you very happy. We've got just the stuff you want.
(Image 1) X61 - 65/67 SUZ X6 FAIRING WITH DOOR
(Image 2) X61 - 65/67 SUZ X6 FAIRING WITH DOOR
X61 - 65/67 SUZ X6 FAIRING WITH DOOR
Suzuki X6 Race fairing
This is the curvy factory race fairing with removable ignition cover.
(Image 1) VFS1
VFS1 - VINTAGE FAIRING SMALL
Small singles race fairing
We believe this fairing came off a 60’s BSA single. It’s a small narrow fairing witha a very nice slippery shape that will work well on many small bore bikes, 50cc, 125 cc etc.
Please note: You will need to trim out the fork opening.
(Image 1) VESCO2 - VESCO TZ7OO/750 4CYL FAIRING
(Image 2) VESCO2 - VESCO TZ7OO/750 4CYL FAIRING
(Image 3) VESCO2 - VESCO TZ7OO/750 4CYL FAIRING
VESCO2 - VESCO TZ7OO/750 4CYL FAIRING
Full fairing – heavyweight bikes
The fairing on the right is a 4-cylinder or heavyweight fairing. It was mounted on TZ750’s, TZ500’s as well as Brit triples, Harley and larger motorcycles.
(Image 1) VESCO1 - VESCO TZ250/350 TWINS FAIRING
(Image 2) VESCO1 - VESCO TZ250/350 TWINS FAIRING
(Image 3) VESCO1 - VESCO TZ250/350 TWINS FAIRING
VESCO1 - VESCO TZ250/350 TWINS FAIRING
Yamaha TZ250 Vesco race fairing – 3-piece
Don Vesco has been around racing for…well almost before asphalt. Back in the 70’s he used to make fairings. Yep, you guessed it… we have the molds now.
this is one of his most popular 70’s designs, a twins or lightweight bike fairing. This was mounted on TZ250’s,TZ350’s and lots of RD’s as well as Brit bikes.
This fairing and the seats below are perfect for a vintage restoration and are legal for all vintage race classes.
TZ5001 - FAIRING TZ500 G
Yamaha TZ500 fairing
