(Image 1) FZR75011
FZR75011 - 87/88 FZR750/1000 RADIATOR GUARD
Measurements, fitment, and other pictures...
Yamaha FZR750 Inner radiator guard
This is that little piece that mounts between the right and left lower and right behind the front tire. It screws into the side of your fairings or is glued in with clear silicone. We’ve seen it done both ways. In either case, it helps clean up the inside of the bottom of that fairing assembly.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
Customer Photos and Reviews
Once again we make every screen to order and most often needs custom installation on your part.
You might also be looking for...
(Image 1) FZR75010
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR75010 - 87/88 FZR750/1000 2PC FRONT FENDER
Yamaha FZR750 2-pc front fender
This is the hard to find 2-piece front fender for your FZR750.
(Image 1) FZR7509
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR7509 - 87/88 FZR750/1000 SUPERBIKE TAIL
Yamaha FZR750 Super bike race tail
This is the right and left seat sides, the tail light area, and the solo seat cowl all molded as a one-piece unit. If you notice, the seat pan area has been filled in for use with race foam padding. Some mounting bracket fabrication is required, but if you’re racing your FZR you have to have one of these. Street bike guys like them because it gives them that custom race look.
(Image 1) FZR7508
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR7508 - 87/88 FZR750/1000 NUMBER PLATE
Yamaha FZR750 Headlight cover
This piece of fiberglass is used to cover the headlight opening of your stock fairing. It used to be that when you raced in a production class you couldn’t use race specific fairings; you had to use either a stock fairing or one that was an exact replica of a stock fairing. Instead of putting on a big, flat, square number plate on the front of the bike we’ve made these little fiberglass covers that pop rivet onto the front of the fairing. This piece helps the aerodynamics on the front of the fairing instead of using that big flat number plate. Track day guys like this because they can stick this piece in there backpack, drive to the racetrack, duct tape it on, and go racing. Later in the day they will take it off and stick it back inside of their backpack and they can drive their bike home. This is a really cool little piece!
(Image 1) FZR7507
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR7507 - 87/88 FZR750/1000 TAIL LIGHT THING
Yamaha FZR750 Tail light thing
This is that little piece that mounts between the right and left seat sides, located above the taillight and behind your upholstery. It helps you to mount the right and left seat sides. This piece is usually the first thing that gets broken when the bike falls on its side. The chances are that yours is busted or missing completely. Have no fear because we’ve got exactly what you need!
(Image 1) FZR7506
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR7506 - 87/88 FZR750/1000 SEAT COWL
Yamaha FZR750 Solo seat cowl
This panel covers up the passenger part of your tail section and gives you that race replica look. It attaches to the side of your upholstery with Velcro.
(Image 1) FZR7505
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR7505 - 87/88 FZR750/1000 LEFT SEAT SIDE
Yamaha FZR750 Left seat side fairing
This is an affordable replacement panel for your left seat side. This piece is identical in size to the exterior to the stock Yamaha panel with the only exception that we do not do the pushpins on the insides. It is still easily mounted. Call our tech reps for information today!
(Image 1) FZR7504
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR7504 - 87/88 FZR750/1000 RIGHT SEAT SIDE
Yamaha FZR750 Right seat side fairing
This is an affordable replacement panel for the right seat side of your FZR. This is identical in exterior size and shape to the Yamaha panel with the exception that we do not do the internal pushpins to mount onto your chassis. But this is no big deal because our tech reps can explain to you how to mount them. Give us a call today!
(Image 1) FZR7503
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR7503 - 87/88 FZR750/1000 LEFT LOWER
Yamaha FZR750 Left Lower fairing
Affordable replacement panel for your crash damaged bodywork on your FZR. This is identical in exterior shape to your stock FZR panel with the exception that we do not do the tabs on the inside for the inner radiator guards. But this is no big deal because our tech reps will explain the process to you and you will be able to mount it on quickly. Call us today!
(Image 1) FZR7502
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR7502 - 87/88 FZR750/1000 RIGHT LOWER
Yamaha FZR750 Right lower fairing
This is a replacement to the FZR750 right side panel. This bolts up with your stock Yamaha brackets and hardware. Although this piece is identical in exterior size to the stock Yamaha piece we do not do the internal tab work to mount the inner radiator shrouds. This is no problem though because a crafty guy can figure this out and do it in only a few minuets. Our tech reps have ideas suggestions have ideas on how you can do this if you have any questions. Call us and get your panel today!
(Image 1) FZR7501S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FZR7501S - 87/88 FZR750/1000 STREET UPPER
Yamaha FZR750 Street upper fairing
What we have here is a replacement panel for your FZR750. This piece has the headlight holes cut open for street use. Although this panel is identical in exterior shape to the stock Yamaha piece we do not do the inside tab work to mount your headlights. But this is no problem we’ve been selling this panel for over 18 years, so our tech guys can tell you exactly how we bolt fairing on. A crafty guy can mount this onto his bike in less time than it takes to finish a 6-pack. Yamaha does not sell these parts anymore and good, clean pieces have all dried up in salvage yards years ago. No worries though, because we’ve got exactly what you need! Call our sales reps today!