Vintage Full Fairings

BULSDT1 - BULTACO TSS SINGL DOWN TUBE FAIRNG

Bultaco TSS single downtube race fairing
The single downtube fairing is notched out to accommodate the exhaust header.

XR7504 - 72/74 (LONG CIRCUT)DISC BRAKE FAIR

HarleyXR750 fairing long circuit - disc brake
The three piece design pictured was obtained from Rob Ianucci of Team Obsolete; the molds were taken off of original, unmounted Harley Davidson parts.
Two different versions are available. The lowers are similar, but the upper differs depending on whether the bike is a drum or disc brake unit.
The disc brake version of this fairing has a much smaller and shorter dash area to make room for the massive brake master cylinder mounted on the handlebars, shown in the pictures below.

XR7503 - 72/74 (LONG CIRCUT)DRUM BRAKE FAIR

XR7501 - 72/74 HOURGLASS SHORT CIRCUIT

HarleyXR750 Hourglass fairing - short circuit - low boy
This the short race circuit fairing, also known as the hourglass fairing, which was designed for use on the low boy chassis. With its much lower steering head height, this was the preferred setup on tighter tracks. The fairing itself is actually much smaller than its long circuit counterpart -- though not quite as aerodynamic. Again, these fairings were obtained from Team Obsolete and made off of uncrashed Harley parts. It you have an XR project in the works or are building a vintage racer, Airtech can make you very happy. We've got just the stuff you want.

X61 - 65/67 SUZ X6 FAIRING WITH DOOR

Suzuki X6 Race fairing
This is the curvy factory race fairing with removable ignition cover.

VFS1 - VINTAGE FAIRING SMALL

Small singles race fairing

We believe this fairing came off a 60’s BSA single. It’s a small narrow fairing witha a very nice slippery shape that will work well on many small bore bikes, 50cc, 125 cc etc.

Please note: You will need to trim out the fork opening.

VESCO2 - VESCO TZ7OO/750 4CYL FAIRING

Full fairing – heavyweight bikes
The fairing on the right is a 4-cylinder or heavyweight fairing. It was mounted on TZ750’s, TZ500’s as well as Brit triples, Harley and larger motorcycles.

VESCO1 - VESCO TZ250/350 TWINS FAIRING

Yamaha TZ250 Vesco race fairing – 3-piece
Don Vesco has been around racing for…well almost before asphalt. Back in the 70’s he used to make fairings. Yep, you guessed it… we have the molds now.
this is one of his most popular 70’s designs, a twins or lightweight bike fairing. This was mounted on TZ250’s,TZ350’s and lots of RD’s as well as Brit bikes.

This fairing and the seats below are perfect for a vintage restoration and are legal for all vintage race classes.

TZ5001 - FAIRING TZ500 G

Yamaha TZ500 fairing

TZ7504 - TZ750 TAYLOR OW31 UPPER / LOWER

Yamaha TZ750 – OW31

TZ750E - 77-78 TZ750 D&E FAIRING

Yamaha TZ750 D/E race fairing
This is the Taylor version of the D/E fairing. The factory fairing had a removable aluminum belly pan. The Taylor 2-piece design has a molded in fiberglass one, so the lower is all one piece.

TZ7502 - TZ500/750 EUROPE WIDE FAIRING

Yamaha TZ750 TZ500 fairing – European / wide

TZ7501 - TZ750 ENDURANCE FAIRING UPPER ONLY

Yamaha TZ750 Endurance upper fairing – upper with headlight opening only.
This ultra rare endurance upper is available only from Airtech. Matches the TZ7504 OW31 lower or can be made to work with TZ7502 with some light modifications to the front lip.

Headlight openings: 5.25"

TZ700A1 - 74/76 TZ700/750 FAIRING

Yamaha TZ700 TZ750 A B race fairing
The original TZ 750 A and B model fairings are available. This is a three piece fairing assembly. There’s a main fairing section, belly pan, and a triangular piece that fits behind the forks and directs air to the radiator.

TZ250S1 - 85/87 TZ250S FAIRING W/DUCTS/CUFFS

Yamaha TZ250 race fairing
It is a six piece fairing with an upper, lower, and handcuffs for each side. Left and right radiator vents are built into the molds, which appear for the first time on this fairing to aid in pulling air out of the radiator.