HONDA CBR1100 XX 1997-'02 BLACKBIRD
Blackbird, Blackbird...where art thou Blackbird? Over 60,000 feet high and out of radar detection.
More than likely yours is going 160mph and gets caught in radar traps. Don't you wish you had radar reversible carbon fiber? No problem you've come to the right place, we can make it for you. What...not enough money for carbon fiber? Well you can still replace your crash damage panels or lighten up your missile with our fiberglass bodywork.
We make a street upper that uses the stock headlights or a competition upper with no headlight hole, but heck you can cut a hole and use one of our trick projector lights for a custom street bike look. We also offer the right and left fairing lowers, radiator shroud, front fender and even a few race seats, but you gotta get the carbon dash...after all that's what you'll be lookin at most of all... we know you ain't lookin at your speedo! Call your sales rep and get your cool new bodywork today!
(Image 1) CBRXX10 - 97/02 CBRXX DRAG BIKE FUEL TANK
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX10 - 97/02 CBRXX DRAG BIKE FUEL TANK
Honda CBR1100 XX Blackbird Race tank
This is a lightweight fiberglass race tank for the black bird. This fuel tank saves almost ten pounds off of the top of your motorcycle. You'll notice an immediate handling difference in your motorcycle without all that weight on the top of it. This fuel tank has no provisions for the fuel level sending unit and comes with two 3/8ths bungs in the bottom for external fuel pumps only.
(Image 1) CBRXX10S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX10S - 97/02 CBRXX SLAMMED FUEL TANK
Honda CBR1100 XX Blackbird Slammed fuel tank
This gas tank is two inches narrower and three inches lower that stock gas tank. Don't even think about racing a bike without using one of these smaller gas tanks. The black bird gas tank is huge! Not only does that thing weigh a ton, but it's just a monster to try to crawl around. This slammed gas tank is the solution! We know Kent Stotz would not have won any of his championships without this gas tank. Just ask him, he'll agree. Get yours today!
(Image 1) CBRXX10S2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX10S2 - 97/02 CBRXX SLAMMED FUEL TANK "2"
Honda CBR1100 XX Blackbird Slammed Fuel Tank 2
This is an exaggerated version of our slammed fuel tank for the Black Bird. This tank is the next step smaller for those very serious drag racers like Kent Stotz. This tank will be used on his shoot out bike in his attempt to regain the Pro Star Championship in 2005.
(Image 1) CBRXX1C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX1C - 97/02 CBRXX1100 COMPETITION UPPER
Honda CBR1100 XX Blackbird Competition upper
This fairing is identical in exterior shape to your original black bird upper fairing with the exception that the headlight holes have been filled in for competition use. This fairing is used extensively in drag racing by multi-time street bike shoot out champion Kent Stotz. So if you are racing your bird or maybe want to cut a custom headlight shape out of the front of this for a cool street bike application, we've got the fairing you need. Give our sales reps a call today!
(Image 1) CBRXX1DF
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX1DF - 97/02 CBRXX DRAG RACE FAIRING
Honda CBR1100 XX Blackbird Dragbike Fairing
This is the one-piece dragbike fairing was the one used by multi-time street bike shoot out champion Kent Stotz on his turbo Bird. So if you are racing your Blackbird, we've got the fairing you need. This fairing will work well with a turbo or standard header, there is no bulge for a sidewinder. Give our sales reps a call today!
(Image 1) CBRXX1S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX1S - 97/02 CBRXX1100 STREET UPPER
Honda CBR1100 XX Blackbird Street Upper fairing
Do you need to replace your expensive crash damaged upper for your black bird? We've got what you need! We offer this light weight fiberglass replacement panel that is identical in exterior shape to your stock Honda piece, the only exception is that we do not do the inside tab work for the headlights. But that's no big deal, our sales reps will tell you how to mount the headlights and our fairing onto your chassis. A crafty guy can mount this on his bike in a couple of hours and save himself hundreds of dollars over the stock Honda piece. Give our sales reps for more details today!
(Image 1) CBRXX2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX2 - 97/02 CBRXX1100 RIGHT LOWER
Honda CBR1100 XX Blackbird Right lower
This is a lightweight, inexpensive, crash damaged replacement part for your bird. You will need to do a little tab fab if ya want to use this on a street bike but a crafty guy will be able to do it in a few min to save himself hundreds of dollars less than Honda wants for these parts.
(Image 1) CBRXX3
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX3 - 97/02 CBRXX1100 LEFT LOWER
Honda CBR1100 XX Blackbird Left lower
This is a lightweight, affordable replacement panel.You will need to do a little tab fab if ya want to use this on a street bike but a crafty guy will be able to do it in a few min to save himself hundreds of dollars that Honda wants for these parts
(Image 1) CBRXX4
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX4 - 97/02 CBRXX1100 SUPERSPORT TAIL
Honda CBR1100 XX Blackbird +4 Stretch drag racing tail
This is a race tail that is four inches longer than stock. This tail section also includes a dual step seat assembly with a lower front pocket that locks you into the seat pan area on hard launches. It also has dual step that you can slide on up onto so you can flatten out your back for those high speed passes. The tail section also has a license plate bracket molded into the back of it. This seat was used by shoot out champion Kent Stotz for many years.
(Image 1) CBRXX4S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX4S - 97/02 CBRXX EXTENDED DRAG TAIL
Honda CBR1100 XX Blackbird +4 Stretch drag racing tail
This is a race tail that is four inches longer than stock. This tail section also includes a dual step seat assembly with a lower front pocket that locks you into the seat pan area on hard launches. It also has dual step that you can slide on up onto so you can flatten out your back for those high speed passes. The tail section also has a license plate bracket molded into the back of it. This seat was used by shoot out champion Kent Stotz for many years.
(Image 1) CBRXX4S8
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX4S8 - 97/04 CBRXX EXTENDED TAIL +8
Honda CBR1100 XX Blackbird +8 Stretch drag race tail
This tail section is stretched eight inches over stock length. It has a dual step in the seat pan area for drag racing launches. This is the newest style of seat that Kent Stotz is using on his shoot out bike.
(Image 1) CBRXX5
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX5 - 97/02 CBRXX1100 FRONT FENDER
Honda CBR1100 XX Blackbird Front fender
This is a direct replacement for a black bird front fender. Simply drill the mounting holes and install.
(Image 1) CBRXX7
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX7 - 97/02 CBRXX1100 RADIATOR GUARD
Honda CBR1100 XX Blackbird Radiator shroud
This is the area between the right and left fairing lowers around the radiator area. This panel seals off the air between the lowers to avoid a bleed off around the sides of the radiator. This helps funnel air through the radiator and increases the cooling efficiency of the radiator.
(Image 1) CBRXX8
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX8 - 97/02 CBRXX1100 DASH
Honda CBR1100 XX Blackbird Dash panel
This is a one-piece race dash panel assembly for black birds. This is the right and left dash panel and the instrument area all molded as a one-piece unit. Shoot our champion Kent Stotz uses this on his race bike, he drills holes in the front and mounts his boost gage and instruments in it. Street guys can simply cut this area open to work with the stock gage cluster. This piece is sold in fiberglass but is also available in carbon fiber. Ask our sales reps on pricing today!
(Image 1) CBRXX9
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CBRXX9 - 97/02 CBRXX1100 REAR FENDER
Honda CBR1100 XX Blackbird Rear fender
This is a rear fender that mounts onto your swing arm that keeps dirt and debris from being thrown forward and damage your shock assembly. Keep crap off of your shock and make your bike look cool with this cool swing arm fender. This is sold in fiberglass but is also available in carbon fiber. Ask one of our sales reps about it today!