GSX13AD - 99/04 GSX1300 AIR DUCT HIGH FLOW
Measurements, fitment, and other pictures...
Suzuki GSX 1300 Hayabusa Air ducts
These are high flow air ducts for your Busa. These ducts eliminate all of the sumps, and bumps, and lumps on the inside of your stock air ducts and do nothing but ram all kinds of air into your air box.
These duct assembly slide completely through the frame and into our high-pressure air box. If you' re using your stock air box, you' ll need to cut these fiberglass ducts flush with the inside of your frame. Once you slide them through the frame you' ll figure out what were talking about.
Get some serious airflow into your air box with these air ducts. Sorry these air ducts are for serious HP and wont fit with your turn signals. You will have to use a race upper without the turn signals, but hey, what kind of race bike needs stinkin' turn signals anyhow?
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
Customer Photos and Reviews
Once again we make every screen to order and most often needs custom installation on your part.
You might also be looking for...
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
LSR5 - LAND SPEED FENDER GSXR FORK
One of our most popular landspeed fenders. Designed for ’91-’98 inverted GSXR forks, but adapted for use by many for use on different USD front ends.
Max wheel/tire size: 120/70 x 17"
Width inside forks : 5.5"
Width outside forks: 10"
Width at dimpled mounting points: 9.25"
Width at inside mounting tabs: 5.75"
Overall heigth: 13.5"
Length along fender: 41"
Length accross: 27"
Width inside fender*: 4.75"
* measured 2" inside fender

(Image 1) LSR4 - LAND SPEED "TATRO"FENDER 18" TIRE
(Image 2) LSR4 - LAND SPEED "TATRO"FENDER 18" TIRE
(Image 3) LSR4
(Image 4) LSR4
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
LSR4 - LAND SPEED "TATRO"FENDER 18" TIRE
Tatro land speed fender
Designed for 225×18" wheel. Great fender for small lightweights using fairly narrow conventional forks ie. Ceriani.
Width inside forks : 4"
Width outside forks: 7.75"
Width at small fender strut tabs: 3"
Overall heigth: 14"
Length along fender: 42.5"
Length accross: 25.5"
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
LSR1F - S&S LAND SPEED FRONT FENDER
Fits up to 2.50×18" on conventional forks.
Width inside forks : 5"
Width outside forks: 8.75"
Width at bottom of sliders: 8"
Overall heigth: 14"
Length along fender: 40.25"
Length accross: 26"
Width inside fender*: 4.25"
* measured 2" inside fender

(Image 1) CANAM1 - CAN-AM 125 LAND SPEED FAIRING
(Image 2) CANAM1 - CAN-AM 125 LAND SPEED FAIRING
(Image 3) CANAM1
(Image 4) CANAM1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CANAM1 - CAN-AM 125 LAND SPEED FAIRING
CanAm 125 Land speed fairing
Please note: This fairing is a "blank canvas" for your project. You will need to trim out the handlebar and fork openings and trim the rear edge for foot controls.
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AROFK - AERO KAWASAKI FRONT FENDER
Landspeed fender – Kawasaki
Designed for use on ’93 & up ZX600, ZX11; can be adapted to many other conventional front ends with 17" front wheel.
Width inside forks : 5.5"
Width outside forks: 10.5"
Width near axle: 10"
Overall height: 13"
Length along fender: 29"
Length across: 23"
Width inside fender*: 5"
* measured 2" inside fender
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
LSRSC4 - LAND SPEED SIDECAR PLATFORM
Land speed side car platform
Shown here with the LSCR1 ribs so you can see how the platform and ribs fit together.
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
LSRSC3 - CESSNA WHEEL COVER - LEFT
Land speed side car wheel cover – left
Cessna 170/172/175 "wheel pants", excellent for side car applications.
Length: 35.5"
Width: 8.75"
Height: 12"
Opening bottom: 18.5"x8"
Opening side: 8.5"x5"
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
LSRSC2 - CESSNA WHEEL COVER - RIGHT
Land speed side car wheel cover – right
Cessna 170/172/175 "wheel pants", excellent for side car applications.
Length: 35.5"
Width: 8.75"
Height: 12"
Opening bottom: 18.5"x8"
Opening side: 8.5"x5"
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
LSRSC1 - LANDSPEED SIDECAR WING - RIBS
Land speed side car ribs
These "ribs" get sandwiched between the top and bottom of the wing.
32" long, 3" at thickest point.
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
PEEL1 - PEEL FAIRING - SMALL
Ducati single Peel fairing
This one piece fairing has a nice slippery shape and is pretty wide at the top which will give you good coverage for arms and shoulders so you can tuck into that bubble. The Peel fairings were designed for the Mountain Course / Isle of Man TT and used to good effect in the US at high speed tracks like Willow Springs and Daytona.