EX 500 ’94-’09
So you need new skin for your new ’94-’08 EX500? We’ve got just the thing for you, be you street-bound warrior or track-God. Two fine uppers are available. One is a street replacement fairing that features pre-cut opening for the stock headlight (fabrication required). The other is smooth all over and perfect for the track. The race upper can be used to create a more tricked out bike, perhaps with aftermarket turn signals and a projector beam headlight.
The chin spoiler below mounts easily with your stock brackets and will look great with either upper
We also offer a belly pan with oil containment for racers. We also have 2 seats available for the EX500. The OEM styled unit is the stock sides and the tail light area molded into a one-piece unit.
The other seat is our super sport seat and is like the OEM seat, but with a solo seat cowl molded into it. It’s a cool seat for that race replica look. Whatever your need, AirTech has got you covered.
Now available! We just finished a full length lower for your EX500. This is by far the best looking long lower fairing out there! We put nice sharp style lines in it to match the lines of the upper fairing and large ducts on the side to draw hot air out and away from the motor.
Easy installation! Uses the stock mounting points on the radiator and underneath the bike.
Tired of that ugly gap between upper and lower fairing? Get your full lower today! Part# 2EX5003L
(Image 1) 2EX5006
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2EX5006 - 94/09 EX500"D" FRONT FENDER
Kawasaki EX500 Front fender
This is our lightweight replacement fender for the EX500. Simply drill the mounting holes and mount it onto your chassis.
(Image 1) 2EX5005
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2EX5005 - 94/09 EX500"D" UNDER SEAT ENCLOSU
Kawasaki EX500 Under seat enclosure
This panel replaces all of that black plastic crap underneath your tail section. This panel really gives your EX a sport bike look. An average skill level and normal hand tools are required to mount this. You have to hack a lot of that black plastic rear fender crap off of there, but a crafty guy can have it mounted onto his bike faster than he can drink a 6-pack. It is well worth the effort.
(Image 1) 2EX5004
(Image 2) 2EX5004
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2EX5004 - 94/09 EX500"D" SUPERSPORT TAIL
Kawasaki EX500 Super sport race tail
What you see above is our most popular EX500 piece. This race tail is the right and left seat sides, the tail light area, and the solo seat cowl all molded as a one-piece unit.
Your stock long upholstery slides into this tail section and hides the passenger part of this seat. You then take this assembly and install it onto your chassis and latch the seat locks. To remove this tail section simply pop your “seat latches” and remove the whole assembly off the back of your bike.
This tail is popular in race use and legal in most race organizations around the country. This is also real popular way to get a custom race look for your street bike. The taillight is not cut out but the shape is clearly marked on the tail so you can easily cut it out for street use.
Get yours today!
(Image 1) 2EX5004S
(Image 2) 2EX5004S - 94/09 EX500"D" STREET SEAT SIDES
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2EX5004S - 94/09 EX500"D" STREET SEAT SIDES
Kawasaki EX500 Street tail
This one-piece unit replaces the busted up left and right seat sides on your EX 500. Lighter and a cleaner than stock!
(Image 1) EX5003OCP
(Image 2) EX5003OCP
(Image 3) EX5003OCP
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
EX5003OCP - 87/09 EX500 OIL CATCH PAN
Kawasaki EX500 Oil containment pan
If you are racing your EX500 you will need oil containment. All race organizations require it. We like installing them even for track days, for peace of mind.
This oil catch pan is easily installed with three dzus buttons an can be attached to any of our lower fairings including the full length lower!
(Image 1) EX5003L
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
EX5003L - 87-93 EX500 LOWER - LONG
Kawasaki EX500 full lower fairing – Long
We just finished a full length lower for your EX500. This is by far the best looking long lower fairing out there! We put nice sharp style lines in it to match the lines of the upper and large ducts on the side to draw hot air out and away from the motor.
Tired of that ugly gap between upper and lower fairing? Get your full lower today!
Fits ALL years EX500 ’87 – ’09
Please note: This is a street lower and does not have oil containment.
(Image 1) EX5003M
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
EX5003M - 87/09 EX500 LOWER WITH/OIL CONTAIN
Kawasaki EX500 lower fairing – Modified bellypan
A lot of people race these EX500s and most race organizations require oil containment. This is exactly what you need! This piece is identical to the Kawasaki accessory belly pan for the EX500s with the exception that we filled in the bottom area for oil containment. This piece is legal oil containment for most race organizations. It mounts to the stock Kawasaki brackets.
Fits ALL years EX500 ’87 – ’09
(Image 1) EX5003
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
EX5003 - 87/09 EX500 LOWER NO/OIL CONTAINME
Kawasaki EX500 Lower fairing – bellypan
What we have here is a replacement part for the Kawasaki EX500 lower belly pan accessories. This lower was an accessory through Kawasaki motors for the 1987-1993 EX500s, and then it was factory equipment on the 1994 and newer EX500s. This is a direct replacement piece for the Kawasaki lower and bolts up to all of your stock brackets. Although, this part does not extend up to meet your upper fairing it still helps to finish off your EX and it gives you that sporty look. Get yours today!
(Image 1) 2EX5001S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2EX5001S - 94/09 EX500"D" STREET STYLE UPPER
Kawasaki EX500 Street upper fairing
This is street replacement fairing for your crash damaged EX500. Although this fairing is identical in exterior shape to the stock Kawasaki piece, we do not do the mounting tabs on the insides for the headlight. You’ll need to fabricate your own brackets to mount the headlight if you are planning to use this on the street. It is not too difficult to do a pretty crafty guy can usually handle it in a few hours. You can save yourself a ton of money over the stock Kawasaki piece!
(Image 1) 2EX5001C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2EX5001C - 94/09 EX500"D" COMPETITION UPPER
Kawasaki EX500 Competition upper fairing
If your racing your little EX500 or need an upper fairing for a custom headlight cut our for your street bike this is the part you’re looking for. Basically it’s our EX500 Street fairing with the headlight holes and turn signal holes filled in. A must for racers or track day guys, but custom street guys like it because they can cut their own headlight configuration out. They can cut the standard headlight opening or cut two round holes or two cats’ eyes or even a smiley face. This is the fairing that you need! Call one of our sales reps today!