CBR 600F3 ’95-’96
Pictured above is our deluxe two piece F3 fairing, which was originally designed for HRC. Yes, that HRC.
Above you see our Smokin Joe’s racing kit, as used by the indomitable Miguel Duhamel, who won the five AMA 600 Supersport championships with it in the nineties.
Both the HRC and Smokin Joe assemblies split horizontally around the cylinders for easy access to the bike’s innards. The front radiator shroud and hatch doors have been molded in for a clean flowing look.
The two seats shown on the left are our 96′ edition F3 race seats. The bottom seat is our supersport style and works with the stock F2 or F3 (pre-’97) upholstery.
If it is good enough for that Miguel guy to use, you know it’s a premium item. The other seat is a little something we grafted off of the RC 45 to create an awesome look for the F2 and F3. This particular unit has the seat pan section filled in and is designed to be used with our molded closed cell foam seat pads. This seat was used by Steve Crevier at Smokin’ Joe’s as well as Erion Racing. This is the best stuff on the market and it is available to you. You lucky dog!
(Image 1) CREA61K
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CREA61K - 92/98 CBR600 F2/F3 CREA KIT
Crea body kit
This is a complete body conversion kit for the ’91-’94 CBR 600 F2 and the ’95-’98 CBR 600 F3. The kit contains main upper fairing, the lower belly pan, the front fender, tail section, and a removable solo seat cowl. This body kit bolts up to your CBR 600 using all your stock Honda brackets and hardware.
Please note that the Honda front main bracket bends like butter so we strongly recommend replacing your bracket with a new Honda piece.
This fairing assembly uses a ’95-’98 CBR 600 F3 windscreen (not supplied).
This body kit will bolt onto all CBR 600s from ’91-’98.
The ’97-’98 CBR 600 F3 owners will have to replace their taillight with a ’91-’96 CBR 600 taillight assembly.
This kit requires an average skill level to install. By average we mean that if you can change your rear tire you should have no problem installing this onto your motorcycle. Some drilling, trimming, and fitting is required to mount this assembly. As you can see, the results are well worth it!
(Image 1) 3CBR66
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3CBR66 - 95/96 CBR600F3 FRONT FENDER
Honda CBR 600 F3 Front fender
Replace you busted front fender with our lightweight fiberglass piece. Simply drill the mounting holes, paint, and attach it onto your CBR 600 F3.
(Image 1) 2CBR614
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR614 - 91/95 CBR600F2 REAR FENDER
Honda CBR 600 F2 Rear swing arm fender
Replace your crash damaged or missing rear swing arm fender with our lightweight fiberglass piece. Simply drill the mounting holes and attach it onto the Honda CBR 600 F2 chassis.
(Image 1) 2CBR615
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR615 - 91/96 CBR600F2/F3 U/SEAT ENCLOSURE
Honda CBR 600 F2 Undertail
Very cool under tail that cleans off the underneath of your tail section. Simply hack out all of that stock black, plastic crap that sticks below your body panels and mount our lightweight fiberglass piece underneath there. Custom paint or color-match the rest of your bodywork for a cool street look. One thing that you may notice is that our under tail has a license plate bracket already molded into it so there are no ugly brackets needed to mount your license plate on it. This is a cool piece! Get yours today!
(Image 1) 3CBR69B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3CBR69B - 95/96 CBR600F3 SUPERBIKE TAIL
Honda CBR 600 F3 RC45 Replica Superbike race tail
This is our RC45 Replica racetail for the Honda CBR 600 F3 , that has a filled in seat pan to work with closed cell racing foam, available through us. Give your street bike a custom race look with this superbike race tail. Get yours today!
(Image 1) 2CBR69BS
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR69BS - 91/96 CBR600F2/F3 SUPERBIKE SHORT
Honda CBR 600 F2 Superbike race tail – short version
Like the 2CBR69B but ehm… shorter. This seat has a much lower profile and will make your rear end look smaller. Ladies?
(Image 1) 2CBR69B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR69B - 91/96 CBR600F2/F3 SUPERBIKE TAIL
Honda CBR 600 F2 Superbike race tail
This tail section is similar to the Super sport race tail with the exception of that the seat pan area has been filled in for this race padding. A lot of professional racers like this super bike style seat because they can feel the rear suspension and rear tire better, they also feel that the stock upholstery dampens the effect and that they can get better handling out of there chassis with this style of tail section. This seat works with closed cell race foam, available through us.
(Image 1) 3CBR69S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3CBR69S - 95/96 CBR600F3 SUPERSPORT TAIL
Honda CBR 600 F3 RC45 Replica Supersport race tail
This is our RC45 Replica racetail for the Honda CBR 600 F3, that works with the stock upholstery. Give your street bike a custom race look with this supersport race tail. Get yours today!
(Image 1) 2CBR69W
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR69W - 91/96 CBR600F2/F3 WERA RACE TAIL
Honda CBR 600 F2 Supersport race tail
This is the WERA race legal version of the 2CBR69S.
(Image 1) 2CBR69S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR69S - 91/96 CBR600F2/F3 SUPERSPORT TAIL
Honda CBR 600 F2 Supersport race tail
Here is a real cool piece for your CBR 600 F2. We’ve taken the right and left seat sides, the tail light area, and the solo seat cowl and molded them into a one-piece race tail. Simply slide your long upholstery inside this fiberglass panel and it hides the passenger part of the seat. Then take the seat assembly and slide that down your chassis, attach the mounts. Give your street bike a custom race look with this super sport race tail. Get yours today!
(Image 1) 2CBR611
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR611 - 91/94 CBR600F2 SEAT COWL
Honda CBR 600 F2 Solo seat cowl
This nifty little piece covers the passenger part of your seat and makes your Honda CBR 600 F2 looks like it has a one-piece race tail. There is a simple installation with Velcro.
(Image 1) 2CBR67
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR67 - 91/94 CBR600F2 TAIL LIGHT THING
Honda CBR 600 F2 Tail light thing
This is our little piece that goes between your right and left seat sides and above your tail light on the back of your Honda CBR 600 F2. Simply drill the mounting holes, paint, and attach it onto your motorcycle.
(Image 1) 2CBR65
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR65 - 91/94 CBR600F2 LEFT SEAT SIDE
Honda CBR 600 F2 Left seat side fairing
Replace your crash damaged Honda CBR 600 F2 seat side with our affordable lightweight panel. This is identical in exterior shape and appearance. Fabrication of mounting tabs will be needed to mount this panel onto your bike.
(Image 1) 2CBR64
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR64 - 91/94 CBR600F2 RIGHT SEAT SIDE
Honda CBR 600 F2 Right seat side fairing
Replace your crash damaged Honda CBR 600 F2 seat side with our affordable lightweight panel. This is identical in exterior shape and appearance. Fabrication of mounting tabs will be needed to mount this panel onto your bike.
(Image 1) 3CBR63
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3CBR63 - 95/98 CBR600F3 LEFT LOWER
Honda CBR 600 F3 Left lower fairing
This is a lightweight crash replacement for your Honda CBR 600 F3. Simply drill the mounting holes and attach it to your bike. When you take it off and paint it no one will ever know the difference! Freshen up that ratty beat up Honda CBR 600 F3 with one of our new body panels today!