(Image 1) 3CBR63
3CBR63 - 95/98 CBR600F3 LEFT LOWER
Measurements, fitment, and other pictures...
Honda CBR 600 F3 Left lower fairing
This is a lightweight crash replacement for your Honda CBR 600 F3. Simply drill the mounting holes and attach it to your bike. When you take it off and paint it no one will ever know the difference! Freshen up that ratty beat up Honda CBR 600 F3 with one of our new body panels today!
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
Customer Photos and Reviews
Once again we make every screen to order and most often needs custom installation on your part.
You might also be looking for...
(Image 1) CREA61K
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CREA61K - 92/98 CBR600 F2/F3 CREA KIT
Crea body kit
This is a complete body conversion kit for the ’91-’94 CBR 600 F2 and the ’95-’98 CBR 600 F3. The kit contains main upper fairing, the lower belly pan, the front fender, tail section, and a removable solo seat cowl. This body kit bolts up to your CBR 600 using all your stock Honda brackets and hardware.
Please note that the Honda front main bracket bends like butter so we strongly recommend replacing your bracket with a new Honda piece.
This fairing assembly uses a ’95-’98 CBR 600 F3 windscreen (not supplied).
This body kit will bolt onto all CBR 600s from ’91-’98.
The ’97-’98 CBR 600 F3 owners will have to replace their taillight with a ’91-’96 CBR 600 taillight assembly.
This kit requires an average skill level to install. By average we mean that if you can change your rear tire you should have no problem installing this onto your motorcycle. Some drilling, trimming, and fitting is required to mount this assembly. As you can see, the results are well worth it!
(Image 1) 3CBR66
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3CBR66 - 95/96 CBR600F3 FRONT FENDER
Honda CBR 600 F3 Front fender
Replace you busted front fender with our lightweight fiberglass piece. Simply drill the mounting holes, paint, and attach it onto your CBR 600 F3.
(Image 1) 2CBR614
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR614 - 91/95 CBR600F2 REAR FENDER
Honda CBR 600 F2 Rear swing arm fender
Replace your crash damaged or missing rear swing arm fender with our lightweight fiberglass piece. Simply drill the mounting holes and attach it onto the Honda CBR 600 F2 chassis.
(Image 1) 2CBR615
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR615 - 91/96 CBR600F2/F3 U/SEAT ENCLOSURE
Honda CBR 600 F2 Undertail
Very cool under tail that cleans off the underneath of your tail section. Simply hack out all of that stock black, plastic crap that sticks below your body panels and mount our lightweight fiberglass piece underneath there. Custom paint or color-match the rest of your bodywork for a cool street look. One thing that you may notice is that our under tail has a license plate bracket already molded into it so there are no ugly brackets needed to mount your license plate on it. This is a cool piece! Get yours today!
(Image 1) 3CBR69B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3CBR69B - 95/96 CBR600F3 SUPERBIKE TAIL
Honda CBR 600 F3 RC45 Replica Superbike race tail
This is our RC45 Replica racetail for the Honda CBR 600 F3 , that has a filled in seat pan to work with closed cell racing foam, available through us. Give your street bike a custom race look with this superbike race tail. Get yours today!
(Image 1) 2CBR69BS
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR69BS - 91/96 CBR600F2/F3 SUPERBIKE SHORT
Honda CBR 600 F2 Superbike race tail – short version
Like the 2CBR69B but ehm… shorter. This seat has a much lower profile and will make your rear end look smaller. Ladies?
(Image 1) 2CBR69B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR69B - 91/96 CBR600F2/F3 SUPERBIKE TAIL
Honda CBR 600 F2 Superbike race tail
This tail section is similar to the Super sport race tail with the exception of that the seat pan area has been filled in for this race padding. A lot of professional racers like this super bike style seat because they can feel the rear suspension and rear tire better, they also feel that the stock upholstery dampens the effect and that they can get better handling out of there chassis with this style of tail section. This seat works with closed cell race foam, available through us.
(Image 1) 3CBR69S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3CBR69S - 95/96 CBR600F3 SUPERSPORT TAIL
Honda CBR 600 F3 RC45 Replica Supersport race tail
This is our RC45 Replica racetail for the Honda CBR 600 F3, that works with the stock upholstery. Give your street bike a custom race look with this supersport race tail. Get yours today!
(Image 1) 2CBR69W
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR69W - 91/96 CBR600F2/F3 WERA RACE TAIL
Honda CBR 600 F2 Supersport race tail
This is the WERA race legal version of the 2CBR69S.
(Image 1) 2CBR69S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2CBR69S - 91/96 CBR600F2/F3 SUPERSPORT TAIL
Honda CBR 600 F2 Supersport race tail
Here is a real cool piece for your CBR 600 F2. We’ve taken the right and left seat sides, the tail light area, and the solo seat cowl and molded them into a one-piece race tail. Simply slide your long upholstery inside this fiberglass panel and it hides the passenger part of the seat. Then take the seat assembly and slide that down your chassis, attach the mounts. Give your street bike a custom race look with this super sport race tail. Get yours today!