VFR 750 ’94-’97
Laid your Honda VFR 750 down? Or are the fairings just tired after more than a decade of faithful service? Help is but a phone call away!
We make a competition upper that can be adapted for street use by cutting out the headlights and indicators. We have the right and left fairing sides, a one piece lower fairing / belly pan, and the front center radiator shroud connecting the right and left center fairing sides together, which seals off the radiator.
The VFR 750 seat assembly combines the left and right seat sides and the tail light area as a one piece unit. A solo seat cowl is also offered to give a solo look while retaining passenger carrying capability. We even have a front fender for your Honda VFR 750.
Does this stuff look good, you ask?! Hell yes. Check out Reg Pridgemore’s racebike with our bodywork on it, shown on the left…
Give Airtech a call today and we’ll set you up with some new VFR 750 fairings!
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3VFR9S-STREET TAIL SECTION
Honda VFR 750 – Street tail section
You’ve asked for it and we’ve listened! This is a replacement tail section for your VFR750, with passenger seat like the stock one.
We’ve taken the stock side fairings and taillight covers and made it into a one piece tail clip. This tail mounts to the stock locations on the side and the two mounting tabs underneath the upholstery.
The taillight opening is cut out but there is no internal tabwork. There is a large flat surface underneath the taillight that you can use as a mounting surface for the taillight, either glueing it in with silicone caulking or by modifying the taillight itself to bolt on with well nuts or something similar. You can also cut out and reuse old tabs or make new ones out of metal and epoxy or fiberglass them in.
We put two dimples on the bottom of the tail so you can screw in your turn signals with the original clip nuts.
(Image 1) 3VFR7
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3VFR7 - 94/97 VFR750 SOLO SEAT COWL
Honda VFR 750 solo seat cowl
This cowl will fit over the passenger part of the seat so you can cover it up when you do not have a pillion. It will make your ride look mucho spiffy.
(Image 1) 3VFR9
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3VFR9 - 94/97 VFR750 SUPERSPORT TAIL
Honda VFR 750 Supersport tail section
We’ve molded the seat sides, taillight area and the cowl into a solo race seat. The taillight can be easily cut out for street use.
(Image 1) 3VFR8
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3VFR8 - 94/97 VFR750 RADIATOR GARD
Honda VFR 750 radiator shroud
This is a replacement shroud to fit around the radiator to prevent bleed off and aid cooling.
(Image 1) 3VFR4C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3VFR4C - 94/97 VFR750 COMPETITIO MIDS,LOWER
Honda VFR 750 Competition lower fairing with mids
This is a cool belly pan that has the mid fairings attached, so it will connect straight to the upper fairing. It even has the radiator shroud molded in. You will eliminate no less than 3 seperating seams when fitting this piece, making for a much cleaner looking fairing assembly.
(Image 1) 3VFR4
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3VFR4 - 94/97 VFR750 LOWER
Honda VFR 750 Lower fairing / belly pan
This is a lightweight affordable replacement lower fairing for VFR 750.
(Image 1) 3VFR3
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3VFR3 - 94/97 VFR750 LEFT MID
Honda VFR 750 Left mid fairing
This is a lightweight affordable replacement left mid fairing for your Honda VFR 750.
Please note:
We do not do the tabwork on the inside of the panel for the duct grilles or the radiator shroud.
(Image 1) 3VFR2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3VFR2 - 94/97 VFR750 RIGHT MID
Honda VFR 750 Right mid fairing
This is a lightweight affordable replacement right mid fairing for your Honda VFR 750.
Please note:
We do not do the tabwork on the inside of the panel for the duct grilles or the radiator shroud.
(Image 1) 3VFR1C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3VFR1C - 94/97 VFR750 COMPETITION UPPER
Honda VFR 750 Competition upper fairing
What we have here is VFR 750 upper fairing with headlight and turn signal holes filled in for race purposes. You can put this fairing on a street bike but you’ll have to cut out the headlight openings and fabricate and epoxy some mounts on the inside of the fairing.