(Image 1) 3VFR2
3VFR2 - 94/97 VFR750 RIGHT MID
Measurements, fitment, and other pictures...
Honda VFR 750 Right mid fairing
This is a lightweight affordable replacement right mid fairing for your Honda VFR 750.
Please note:
We do not do the tabwork on the inside of the panel for the duct grilles or the radiator shroud.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
3VFR9S-STREET TAIL SECTION
Honda VFR 750 – Street tail section
You’ve asked for it and we’ve listened! This is a replacement tail section for your VFR750, with passenger seat like the stock one.
We’ve taken the stock side fairings and taillight covers and made it into a one piece tail clip. This tail mounts to the stock locations on the side and the two mounting tabs underneath the upholstery.
The taillight opening is cut out but there is no internal tabwork. There is a large flat surface underneath the taillight that you can use as a mounting surface for the taillight, either glueing it in with silicone caulking or by modifying the taillight itself to bolt on with well nuts or something similar. You can also cut out and reuse old tabs or make new ones out of metal and epoxy or fiberglass them in.
We put two dimples on the bottom of the tail so you can screw in your turn signals with the original clip nuts.
(Image 1) 3VFR7
3VFR7 - 94/97 VFR750 SOLO SEAT COWL
Honda VFR 750 solo seat cowl
This cowl will fit over the passenger part of the seat so you can cover it up when you do not have a pillion. It will make your ride look mucho spiffy.
(Image 1) 3VFR9
3VFR9 - 94/97 VFR750 SUPERSPORT TAIL
Honda VFR 750 Supersport tail section
We’ve molded the seat sides, taillight area and the cowl into a solo race seat. The taillight can be easily cut out for street use.
(Image 1) 3VFR8
3VFR8 - 94/97 VFR750 RADIATOR GARD
Honda VFR 750 radiator shroud
This is a replacement shroud to fit around the radiator to prevent bleed off and aid cooling.
(Image 1) 3VFR4C
3VFR4C - 94/97 VFR750 COMPETITIO MIDS,LOWER
Honda VFR 750 Competition lower fairing with mids
This is a cool belly pan that has the mid fairings attached, so it will connect straight to the upper fairing. It even has the radiator shroud molded in. You will eliminate no less than 3 seperating seams when fitting this piece, making for a much cleaner looking fairing assembly.
(Image 1) 3VFR4
3VFR4 - 94/97 VFR750 LOWER
Honda VFR 750 Lower fairing / belly pan
This is a lightweight affordable replacement lower fairing for VFR 750.
(Image 1) 3VFR3
3VFR3 - 94/97 VFR750 LEFT MID
Honda VFR 750 Left mid fairing
This is a lightweight affordable replacement left mid fairing for your Honda VFR 750.
Please note:
We do not do the tabwork on the inside of the panel for the duct grilles or the radiator shroud.
(Image 1) 3VFR1C
3VFR1C - 94/97 VFR750 COMPETITION UPPER
Honda VFR 750 Competition upper fairing
What we have here is VFR 750 upper fairing with headlight and turn signal holes filled in for race purposes. You can put this fairing on a street bike but you’ll have to cut out the headlight openings and fabricate and epoxy some mounts on the inside of the fairing.