(Image 1) TZ25H2
TZ25H2 - 96/97 TZ250H LOWER
Measurements, fitment, and other pictures...
Yamaha TZ250 Lower fairing
This is a direct replacement to the Yamaha TZ 250 lower. You can freshen up your bike by getting rid of those busted body panels and replacing them with one of our lightweight fiberglass pieces.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
Customer Photos and Reviews
Once again we make every screen to order and most often needs custom installation on your part.
You might also be looking for...
(Image 1) TZ25H6
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZ25H6 - 96/97 TZ250H AIRBOX FRONT & REAR
Yamaha TZ250 Air box assembly
This is a kit air box assembly for your TZ 250. There is no secret that ram air boxes generate more horsepower. It is also no secret that all of the racers, who are running up front and winning, are using these air boxes. If you don’t have an air box on your TZ then you’re probably not winning, and this may be the reason why. You must trim the inside of your fairing assembly to make this kit air box work; so we can say that there is some trimming, fitting, and you need an overall real good idea of carburetor jetting to make this air box work. Once you get it dialed in it is well worth the effort. Get yours today!
(Image 1) TZ25H5
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZ25H5 - 96/97 TZ250H INTAKE DUCT
Yamaha TZ250 Air intake duct
This is the duct that routs air from the front of the fairing down the left side of the motorcycle, over the radiator, and into the frame assembly by your knees. This is direct replacement piece for the TZ 250 air duct. It is sold in fiberglass, but it is also available in carbon fiber. Call our sales reps for a price today!
(Image 1) TZ25H4
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZ25H4 - 96/97 TZ250H FRONT FENDER
Yamaha TZ250 Front fender
This is a direct replacement fender for the TZ 250 H. Simply drill the mounting holes, mount it on your bike, and go for a ride. This fender is sold in fiberglass but it is also available in lightweight carbon fiber. Call our sales reps for a price today!
(Image 1) AT26
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT26 - AIR TECH TZ250 REAR FENDER
Yamaha TZ250 Rear swing arm fender
This fiberglass piece attaches to the swing arm and prevents dirt and other crap from being thrown onto the shock absorber, while it also helps control the turbulent air that is generated from the rear tire. This piece controls that air and allows engine and radiator air to escape out of the rear of the motorcycle. As you can see, we sell this piece in fiberglass but it is also available in lightweight carbon fiber. Call our sales reps for a price today!
(Image 1) TZAS2
(Image 2) TZAS2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZAS2 - TZAS1 DRAFT SHIELD
Yamaha TZ250 undertail / anti-draft shield
Edwards Attach ‘Aero’ undertail.
(Image 1) TZAS1
(Image 2) TZAS1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZAS1 - TZ250D AERO SEAT "EDWARDS,ATTACK"
Yamaha TZ250 Race Tail
This was originally designed in 1993 for use on Chris Delussio and Collin Edwards race bikes. This tail section is a cool anti draft, pinch tail design. You will see this tail used at Daytona, Road America, and even Bonneville. Places where high speed and low drag is a necessity.
(Image 1) AT24
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT24 - AIR TECH TZ250 DRAFT SHIELD
Yamaha TZ250 Tail section
This here is a panel that attaches to bottom of our AT23 race tail. This panel cleans up the under side of the tail section and helps to control the parasitical drag and turbulent air that is generated from the rear tire. This piece definitely works!
(Image 1) AT23
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AT23 - AIR TECH TZ250 TAIL SECTION
Yamaha TZ250 Tail section
Owner and designer Kent Riches came up with a real winner when he designed this one-piece race tail. Road racer Roland Sands became a winner using this tail section. That’s right, Roland Sands won the 1996 AMA 250 championship using this tail section that Kent Riches designed. This sleek, aerodynamic, pumpkin seed shaped tail section really helps close up the air in the back of your little TZ 250. This tail section is a must have for high-speed tracks like Daytona and Road America. Even Bonneville guys love the shape of this tail section.
(Image 1) TZ25H3
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZ25H3 - 96/97 TZ250H RACE SEAT
Yamaha TZ250 Race tail
This is a direct replacement tail for the Yamaha TZ 250 H style race bike
(Image 1) TZ25H1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZ25H1 - 96/97 TZ250H UPPER
Yamaha TZ250 Upper race fairing
This is a direct replacement for the Yamaha 250 upper fairing. Replace that busted bodywork with one of our lightweight fiberglass panels. If you are racing this bike, get two, you always need a spare.