(Image 1) MM4
(Image 2) MM4
(Image 3) MM4 - MAD MAX "GOOSE" SOLO SEAT COVER
MM4 - MAD MAX "GOOSE" SOLO SEAT COVER
Measurements, fitment, and other pictures...
Mad Max Jim Goose – Solo seat cowl
If you don’t want to cut the hinges off the frame, now you don’t have to! We’ve made this really cool solo seat cover that you can bolt straight to the seat pan, just like on (some of) the movie bikes – but a lot cleaner. So this seat cowl will flip up with the stock seat (tech note: make sure you have enough slack on the taillight wires!).
We put a nice flat surface underneat the rear lip for your taillight and sell a nice license plate bracket that bolts right to the rear frame mount.
The ribbed black upholstery is also available from us!
Check out our Australian customer, Rob Orchard’s Z900 with our seat cowl below.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
Customer Photos and Reviews
Once again we make every screen to order and most often needs custom installation on your part.
You might also be looking for...
(Image 1) MM3UP
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
MM3UP - MAD MAX "GOOSE" UPHOLSTERY PAN
Mad Max Jim Goose Fairing – Upholstery pan
This is the matching upholstery pan that will close the storage compartment and can be used as a base for your custom uypholstery. The recessed area locks into the opening in the tail. Usually installed with velcro.
(Image 1) MM3
(Image 2) MM3
(Image 3) MM3
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
MM3 - MAD MAX "GOOSE" TAIL W/ ENCLOSURE
Mad Max Jim Goose Fairing – Tail section
The original Goose replica tail section, not just a botched cover. This tail section has a bonded underseat enclosure with integrated seat support bracket designed for the KZ900/KZ1000 frame. The underseat enclosure forms a storage compartment in the hump and has a flat rear surface to mount your taillight and/or license plate bracket.
Length: 32"
Width front: 7.5"
Widest point: 12.25"
Seat pan: 16"
Height: 9"
(Image 1) MM2
(Image 2) MM2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
MM2 - MAD MAX GOOSE LOWER FAIRING
Mad Max Jim Goose / Toecutter Fairing – Lower
Matching lower to the MM1 Goose upper. Nice mounting flange for a tight seam with the upper.
The back lower edge of these fairings needs to be trimmed to match your foot controls and shoe size.
The Goose bike had rearsets and this setup requires minor trimming for clearance. If you’re using stock KZ footpegs or have feet like a Sasquatch, you’ll need to trim away more!
(Image 1) MM1
(Image 2) MM1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
MM1 - MAD MAX GOOSE UPPER FAIRING
Mad Max Jim Goose / Toecutter Fairing – upper
The original upper fairing as used on both the Goose and Toecutter bike. We went to great lengths to ensure this fairing is accurate in all its details. Small inner dash lip for strength can be trimmed easily if you’re installing a CB radio.