2EX5005 - 94/09 EX500"D" UNDER SEAT ENCLOSU

Kawasaki EX500 Under seat enclosure
This panel replaces all of that black plastic crap underneath your tail section. This panel really gives your EX a sport bike look. An average skill level and normal hand tools are required to mount this. You have to hack a lot of that black plastic rear fender crap off of there, but a crafty guy can have it mounted onto his bike faster than he can drink a 6-pack. It is well worth the effort.

EX5004 - 87/93 EX500"A" SUPERSPORT TAIL

Kawasaki EX500 Super sport race tail
What we have here is a really cool race tail for your EX500s. This super sport race tail is basically the right and left seat sides, the right and left frame covers, the tail light area, and a solo seat cowl all molded as a one-piece unit. To mount onto your bike; simply take your long upholstery, slide it onto this fiberglass tail section, so that the solo seat cowl hides the passenger part of the seat, then take this upholstery/fiberglass assembly, slide it onto your chassis, wiggle it down until the seat locks latch, and then attach the two screws down by your knees. Your ready for a ride! To remove off of the bike, simply pull those two screws out, pop the seat locks, and remove the entire assembly off of the back of the chassis. Its pretty slick! This tail is legal for all race organizations. Street bike guys love this tail because it gives them the custom race bike look for their street bike. These guys simply cut the tail light hole open and mount onto their chassis just like the race guys do.

EX5003OCP - 87/09 EX500 OIL CATCH PAN

Kawasaki EX500 Oil containment pan
If you are racing your EX500 you will need oil containment. All race organizations require it. We like installing them even for track days, for peace of mind.

This oil catch pan is easily installed with three dzus buttons an can be attached to any of our lower fairings including the full length lower!

EX5003M - 87/09 EX500 LOWER WITH/OIL CONTAIN

Kawasaki EX500 lower fairing – Modified bellypan
A lot of people race these EX500s and most race organizations require oil containment. This is exactly what you need! This piece is identical to the Kawasaki accessory belly pan for the EX500s with the exception that we filled in the bottom area for oil containment. This piece is legal oil containment for most race organizations. It mounts to the stock Kawasaki brackets.

Fits ALL years EX500 ’87 – ’09

EX5003L - 87-93 EX500 LOWER - LONG

Kawasaki EX500 full lower fairing – Long
We just finished a full length lower for your EX500. This is by far the best looking long lower fairing out there! We put nice sharp style lines in it to match the lines of the upper and large ducts on the side to draw hot air out and away from the motor.

Tired of that ugly gap between upper and lower fairing? Get your full lower today!

Fits ALL years EX500 ’87 – ’09

Please note: This is a street lower and does not have oil containment.

EX5003 - 87/09 EX500 LOWER NO/OIL CONTAINME

Kawasaki EX500 Lower fairing – bellypan
What we have here is a replacement part for the Kawasaki EX500 lower belly pan accessories. This lower was an accessory through Kawasaki motors for the 1987-1993 EX500s, and then it was factory equipment on the 1994 and newer EX500s. This is a direct replacement piece for the Kawasaki lower and bolts up to all of your stock brackets. Although, this part does not extend up to meet your upper fairing it still helps to finish off your EX and it gives you that sporty look. Get yours today!

EX5002 - 87/93 EX500/250 NUMBER PLATE

Kawasaki EX250 Front number plate
If you want to take your EX out to track days and don’t want to drop the dough for a full race fairing this is the piece you need! Simply remove your headlight out of the stock fairing assembly and glue this piece into where the headlight was, put some numbers on the front, and go racing.

EX5001 - 87/93 EX500"A" STREET UPPER

Kawasaki EX500 Street upper fairing
Do you need some bodywork for your street bike? Is it busted or scratched up? Dont worry about it because we can help you out. What we have here is a replacement fairing for your EX500 street bike. This fairing is identical in exterior shape to the stock EX500 part. Although, we do not do the inside tabs to mount the headlight, but thats no problem because you actually dont need them to mount this fairing onto the bike. Our tech reps have been mounting this fairing onto an EX500 for over twelve years. They simply stick the headlight into the metal fairing bracket and then put the fairing on and mount at the mirrors bolts at the top and to the side mounts at the lower rear of the fairing. Its great! Since all supply of these old EX fairings have long dried up in the salvage yards and the stock Kawasaki piece is pretty expensive. Out street replacement fairing can save you a ton of money. Freshen up your EX500 with one of our fairings today!