ZX9R ’98-’99 Updated*

2ZX9RFT - 98/02 ZX9R FUEL TANK

Kawasaki ZX9R Fuel Tank
This lightweight fuel tank is a must have for anybody racing a Kawasaki ZX9R. This fiberglass fuel tank shaves a ton of weight off the top of your motorcycle. It will give you a noticeable handling improvement when you flick your bike into turns. This tank comes with one of our flush fuel caps and comes with a single 3/8” fuel bung in the bottom to work with a Pingle style of fuel valve. This tank will not work with your stock fuel valve and eliminates the fuel level sender. If you’re looking for an immediate handling improvement on your motorcycle, this tank is exactly what you’re looking for. Get yours today!

2ZX9RAB - 98/02 ZX9R RAM AIR BOX

Kawasaki ZX9R Airbox
We’re not only about making your bikes look good, we’re also about making your bikes go fast. This pressurized air box is a piece that you need. It’s no secret at all a fast front running motorcycles are using pressurized air boxes. And our kit can give you about 7-5% increase in horsepower. This kit only works with Keihin carburetors and will not work with your stock CV style of carburetors. This is not for the light do-it-yourself mechanic; it is for the experienced race tuner that is capable of fabricating, installing and jetting the carburetors. The results are well worth the effort.

2ZX9R9 - 98/02 ZX9R UNDER SEAT ENCLOSURE

Kawasaki ZX9R Under Seat Enclosure
This slick fiberglass piece cleans up the underside of our super sport race tails. This piece requires and average skill level to cut and modify your stock black plastic inner rear fender. But, a crafty guy can usually mount this quicker than he can finish off a six-pack. Well worth the effort once it’s finished.

2ZX9R8 - 98/02 ZX9R REAR SWING ARM FENDER

Kawasaki ZX9R Rear fender
This fender mounts on your rear swing arm and keeps dirt and crud from being thrown up around your shock and the back of your motor. As you can see we make this fender in fiberglass, but it is also available in carbon fiber. Call your sales rep for prices today!

2ZX9R7DB - 98/01 ZX9R EXTENDED DRAG TAIL S/B

Kawasaki ZX9R Super Sport Drag Tail
Basically what we have here is our 2ZX9R7 that has been stretched 6 inches for drag race purposes. It looks cool. Definitely a must have if you slammed and stretched your Kawasaki ZX9R.

2ZX9R7 - 98/01 ZX9R SUPERSPORT TAIL

Kawasaki ZX9R Super Sport Race Tail
This is a one-piece race tail for your Kawasaki ZX9R. It’s basically the left and right seat sides, solo seat cowl, and tail light area all molded as a one-piece unit. This tail is legal for most race organizations and really cool for custom street bikes. Street guys will cut the tail light hole and silicone in their tail light then mount on their chassis for that race bike look. This is definitely the coolest tail section for the Kawasaki ZX9R out there. Get yours today!

2ZX9R5 - 98/02 ZX9R FRONT FENDER

Kawasaki ZX9R Front Fender
This fiberglass front fender is kind of like the stock Kawasaki ZX9R piece with the exception that we molded the black plastic skirts onto the center fender section. We’ve made it all one piece. It’s cool for guys who want to paint the fender all one color.

As you can see this fender is sold in fiberglass, but is also available in carbon fiber. Ask your sales rep for pricing today.

2ZX9R4M - 98/02 ZX9R LOWER WITH OIL CONTAINM

Kawasaki ZX9R Lower fairing – Modified belly pan
This is an oil containment belly pan for the ZX9R. Basically we took the stock ZX9 belly pan and filled in the bottom and stretched it to the back for oil containment. This panel is legal in most race organizations for oil containment. Custom street bike guys like it because it extends back towards the rear tire filling that area and giving their bike more of a race look. If you’re racing, you need this. If you wan to trick out your street bike, you need it to. As you can see this part is available in fiberglass it is also available in carbon fiber. Call your sales rep today for pricing.

2ZX9R4 - 98/02 ZX9R LOWER NO OIL CONTAINMEN

Kawasaki ZX9R Lower fairing – Belly pan
This is a direct replacement panel for a Kawasaki lower belly pan on a ZX9R. Simply drill the mounting holes, mount it on your bike, and go for a ride!

2ZX9R3 - 98/02 ZX9R LEFT CENTER SIDE

Kawasaki ZX9R Left mid fairing
This is an affordable replacement part for an expensive Kawasaki piece. Although our panel is identical in exterior size and shape to the Kawasaki piece, we do not do the inside tabs from the inner radiator guards. But hey, that’s no big deal, people usually just silicone them in. A crafty guy can figure it out and save himself a ton of money over the stock Kawasaki piece. So replace that busted or scratched up bodywork for your Kawasaki ZX9R today.

2ZX9R2 - 98/02 ZX9R RIGHT CENTER SIDE

Kawasaki ZX9R Right mid fairing
This is an affordable replacement part for an expensive Kawasaki piece. Although our panel is identical in exterior size and shape to the Kawasaki piece, we do not do the inside tabs from the inner radiator guards. But hey, that’s no big deal, people usually just silicone them in. A crafty guy can figure it out and save himself a ton of money over the stock Kawasaki piece. So replace that busted or scratched up bodywork for your ZX9 today.

2ZX9R1S - 98/99 ZX9R STREET UPPER

Kawasaki ZX9R Street upper fairing
What we have here is affordable replacement part for a very expensive piece. Although our panel is identical in exterior size and shape to the Kawasaki piece, we do not do the internal tab work for the headlights. But hey, that’s no big deal. They are not needed to mount this on to your bike. Originally Kawasaki had four tabs that located the headlight into the upper fairing. But, the weight of the headlight is actually supported by the metal bracket on the chassis. Those tabs inside the headlight were only there to locate the headlight into the fairing. Usually when you crash, it busts those tabs off the headlight assembly anyhow. To mount this on the chassis, we simply take your stock headlight assembly and stick it into the metal fairing bracket on your bike. Then we slide the upper fairing on to the bike, position it around that recessed notch in your headlight. Then we attach the fairing at the mirrors at the top, and the lowers at the bottom. Then you’re ready to go for a ride. Basically you headlight is still supported by the metal fairing bracket, we just use the fiberglass fairing to keep the headlight from falling out on to the ground. It works great we’ve been doing it for years. So if you have a busted up ZX9R you probably already know that clean parts are hard to find in the salvage yards and dealing with the scum on e-bay isn’t worth the time. You’d probably be happy to know we offer these parts.

2ZX9R1C - 98/99 ZX9R COMPETITION UPPER W/MID

Kawasaki ZX9R Competition upper fairing
This is a really slick fairing for the Kawasaki ZX9R. Basically we have the upper fairing the right, left mids, and the inside radiator shrouds all molded as a one-piece unit. We’ve molded in the headlight and turn signal holes for competition use. This fairing easily mounted on and off of the chassis. Race Bike Guys love this fairing. And street bike guys love it because they can cut any shape hole in the front for a custom street bike application. We have seen people cut two round holes, cat’s eyes, and even a smiley face in the front of the fairing. Drag racers love this fairing also. Perfect for a race bike or a custom street bike. Get yours today.