(Image 1) ZX9R1S
ZX9R1S - 94/97 ZX9R STREET UPPER
Measurements, fitment, and other pictures...
Kawasaki ZX9R Street upper fairing
What we have here is affordable replacement part for a very expensive piece. Although our panel is identical in exterior size and shape to the Kawasaki piece, we do not do the internal tab work for the headlights. But hey, that’s no big deal. They are not needed to mount this on to your bike. Originally Kawasaki had four tabs that located the headlight into the upper fairing. But, the weight of the headlight is actually supported by the metal bracket on the chassis. Those tabs inside the headlight were only there to locate the headlight into the fairing. Usually when you crash, it busts those tabs off the headlight assembly anyhow. To mount this on the chassis, we simply take your stock headlight assembly and stick it into the metal fairing bracket on your bike. Then we slide the upper fairing on to the bike, position it around that recessed notch in your headlight. Then we attach the fairing at the mirrors at the top, and the lowers at the bottom. Then you’re ready to go for a ride. Basically you headlight is still supported by the metal fairing bracket, we just use the fiberglass fairing to keep the headlight from falling out on to the ground. It works great we’ve been doing it for years. So if you have a busted up ZX9R you probably already know that clean parts are hard to find in the salvage yards and dealing with the scum on e-bay isn’t worth the time. You’d probably be happy to know we offer these parts.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) ZX9R13
ZX9R13 - 94/97 ZX9R UNDER SEAT ENCLOSURE
Kawasaki ZX9R Under Seat Enclosure
This slick fiberglass piece cleans up the underside of our super sport race tails. This piece requires and average skill level to cut and modify your stock black plastic inner rear fender. But, a crafty guy can usually mount this quicker than he can finish off a six-pack. Well worth the effort once it’s finished.
(Image 1) ZX9R10
ZX9R10 - 94/97 ZX9R LEFT INTAKE DUCT
Kawasaki ZX9R intake duct – left
(Image 1) ZX9R9
ZX9R9 - 94/97 ZX9R RIGHT INTAKE DUCT
Kawasaki ZX9R intake duct – right
(Image 1) ZX9R8
ZX9R8 - 94/97 ZX9R AIR BOX
Kawasaki ZX9R Airbox
We’re not only about making your bikes look good, we’re also about making your bikes go fast. This pressurized air box is a piece that you need. It’s no secret at all a fast front running motorcycles are using pressurized air boxes. And our kit can give you about 7-5% increase in horsepower. This kit only works with Keihin carburetors and will not work with your stock CV style of carburetors. This is not for the light do-it-yourself mechanic; it is for the experienced race tuner that is capable of fabricating, installing and jetting the carburetors. The results are well worth the effort.
(Image 1) ZX9R7
ZX9R7 - 94/97 ZX9R FUEL TANK
Kawasaki ZX9R Fuel Tank
This lightweight fuel tank is a must have for anybody racing a Kawasaki ZX9R. This fiberglass fuel tank shaves a ton of weight off the top of your motorcycle. It will give you a noticeable handling improvement when you flick your bike into turns. This tank comes with one of our flush fuel caps and comes with a single 3/8” fuel bung in the bottom to work with a Pingle style of fuel valve. This tank will not work with your stock fuel valve and eliminates the fuel level sender. If you’re looking for an immediate handling improvement on your motorcycle, this tank is exactly what you’re looking for. Get yours today!
(Image 1) ZX9R5
ZX9R5 - 94/97 ZX9R FRONT FENDER
Kawasaki ZX9R Radiator shroud
This part goes behind the wheel between the two lower fairings.
(Image 1) ZX9R4
ZX9R4 - 94/97 ZX9R SUPERSPORT RACE TAIL
Kawasaki ZX9R Super Sport Race Tail
This is a one-piece race tail for your Kawasaki ZX9R. It’s basically the left and right seat sides, solo seat cowl, and tail light area all molded as a one-piece unit. This tail is legal for most race organizations and really cool for custom street bikes. Street guys will cut the tail light hole and silicone in their tail light then mount on their chassis for that race bike look. This is definitely the coolest tail section for the Kawasaki ZX9R out there. Get yours today!
(Image 1) ZX9R6
ZX9R6 - 94/97 ZX9R RADIATOR GUARD
Kawasaki ZX9R Radiator shroud
This part goes behind the wheel between the two lower fairings.