(Image 1) 2ZX7R11
2ZX7R11 - 93/95 ZX7R UNDER SEAT ENCLOSURE
Measurements, fitment, and other pictures...
Kawasaki ZX7R undertail
Remove all that stock heavy black plastic and lighten up the back of your bike. This piece attaches inside of our supersport or superbike race tail and cleans up the inside bottom of your race bike (requires trimming). This is a must have to finish off the underside of your bike.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) ZX7R6
ZX7R6 - 91/95 ZX7R REAR FENDER
Kawasaki ZX7R Rear fender – hugger
This is the direct replacement for the black plastic fender that mounts on to your swing arm. This piece keeps dirt from being thrown on to your shock assembly and the back of your motor. As you can see, we sell this part in fiberglass, bit it is also available in carbon fiber. Call our sales reps for pricing today!
(Image 1) 2ZX7R4
2ZX7R4 - 93/95 ZX7R SUPERSPORT TAIL SECTION
Kawasaki ZX7R Supersport seat
This is a one-piece tail for your Kawasaki ZX7R. We’ve basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. This tail is legal for most race organizations and really cool for custom street bikes. Street guys will cut the tail light hole and silicone in their tail light then mount it on their chassis for that race bike look. This is definitely the coolest tail section for the Kawasaki ZX7R out there. Get yours today!
(Image 1) 2ZX7R9
2ZX7R9 - 93/95 ZX7R RADIATOR GUARD
Kawasaki ZX7R radiator guard
This piece fits in between the lower fairings. Mount it with some silicone and you’re good to go…
(Image 1) 2ZX7RSB4 - 93/95 ZX7R WSB FIM AIRBOX
2ZX7RSB4 - 93/95 ZX7R WSB FIM AIRBOX
Kawasaki ZX7R Airbox – FIM World Superbike
1-snorkel airbox
Want to make some extra horsepower for your Kawasaki ZX7R? Get one of our FIM Superbike pressurized air boxes. This airbox utilizes the regular single intake and is our recommendation for a street bike. Easier to install than the AMA airbox above, but still requires decent mechanical ability. Comes with the airbox trim.
(Image 1) 2ZX7RSB3 - 93/95 ZX7R SUPERBIKE AIR BOX
2ZX7RSB3 - 93/95 ZX7R SUPERBIKE AIR BOX
Kawasaki ZX7R Airbox – AMA Superbike
2-snorkel airbox
Want to make some extra horsepower for your Kawasaki ZX7R? Get one of our AMA Superbike pressurized air boxes. This airbox utilizes has two intakes, the regular one and one that grabs air right above the radiator. This box is our recommendation for a race bike. Takes an experienced mechanic/tuner to install. Comes with the airbox trim.
(Image 1) 2ZX7R10
2ZX7R10 - 93/95 ZX7R FUEL TANK
Kawasaki ZX7R Fuel tank
This racing fuel tank is a replacement for your heavy stock tank. You’ll be amazed at the weight savings and the effect on the handling of your bike.
(Image 1) 2ZX7R5
2ZX7R5 - 93/95 ZX7R FRONT FENDER
Kawasaki ZX7R Front fender
Direct replacement for the Kawasaki ZX7R front fender. Just drill the mounting holes, take off your heavy plastic piece, and install our lightweight fiberglass fender. This fender is lighter than stock so your suspension reacts faster. This fiberglass fender is also available in carbon fiber. Ask one of our sales reps today.
(Image 1) 2ZX7R4B
2ZX7R4B - 93/95 ZX7R SUPERBIKE TAIL SECTION
Kawasaki ZX7R Superbike seat
This is a one-piece race tail for your Kawasaki ZX7R. We’ve basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. The seat pan area is filled in for use with closed cell race foam (available through us). This tail is legal for most race organizations. Get yours today!
(Image 1) 2ZX7RSB2
2ZX7RSB2 - 93/95 ZX7R SUPERBIKE LOWER
Kawasaki ZX7R Superbike lower fairing
This is the bottom half to our two-piece SB fairing assembly. The right and left lowers, the front radiator shroud, and the oil containment belly pan are all molded as a one-piece unit. The upper and lower will split around the base gasket for easy access. This fairing is cut open on the left hand side for the Kawasaki ZX7R generators and does have a side stand provision.
This upper fairing only works with our matching Superbike upper fairing (2ZX7RSB2).
(Image 1) 2ZX7RSB1
2ZX7RSB1 - 93/95 ZX7R SUPERBIKE UPPER
Kawasaki ZX7R Superbike upper fairing
Want to build a Superbike replica? We got our hands on some cool SB bodywork for the Kawasaki ZX7R and this is the upper we made!
This upper fairing only works with our matching Superbike lower fairing (2ZX7RSB2).