(Image 1) ZX7R1C
ZX7R1C - 91/92 ZX7R COMPETITION UPPER
Measurements, fitment, and other pictures...
Kawasaki ZX7R Competition upper fairing
This is perfect for the track day guy, who wants to save his stock upper and expensive headlights from possible crash damage. This uses the stock windscreen and attaches at the stock mounting positions. Custom street bike guys love this because they can cut any headlight shape in the front that they wish, or they can install driving lights.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) ZX7R6
ZX7R6 - 91/95 ZX7R REAR FENDER
Kawasaki ZX7R Rear fender – hugger
This is the direct replacement for the black plastic fender that mounts on to your swing arm. This piece keeps dirt from being thrown on to your shock assembly and the back of your motor. As you can see, we sell this part in fiberglass, bit it is also available in carbon fiber. Call our sales reps for pricing today!
(Image 1) ZX7R11
ZX7R11 - 91/92 ZX7R AIR BOX
Kawasaki ZX7R Airbox
We designed this airbox in the early 90′ s for road racer Lee Shirts. This is one of our first experiments with pressurized air boxes. It helped give Lee so much horsepower the bike spit him off at Pomona and gave him his first concussion.
This panel takes and experienced fabricator to install. It is installed over the motor between the frame spars, and the bottom of the fuel tank acts as a lid so proper sealing (with weatherstripping material) is important. Cutting, drilling and trimming is required and the ignition coil has to be relocated. But, it is well worth the effort once you get it mounted. Expect to see horsepower increases in a range of 5-7%.
(Image 1) ZX7R10
ZX7R10 - 91/92 ZX7R UNDER SEAT ENCLOSE RACE
Kawasaki ZX7R Under seat Enclosure
This piece finishes the underside of the tail section on your race bike. Custom street guys like them too. Takes some cutting and trimming, But a crafty guy can mount it faster than he can finish off a six-pack.
(Image 1) ZX7R9
ZX7R9 - 91/92 ZX7R LOWER CENTER RAD GUARD
Kawasaki ZX7R Lower Radiator Guard
This is that little piece that fits between the right and left lowers and mounts behind the front fender. A lot of guys don’ t use these pieces anymore, but if you want to we have them available. Their a little tricky to install, we see people zip tie them on and glue them on with clear silicone. But a craft guy can figure it out in a few minutes.
(Image 1) ZX7R8
ZX7R8 - 91/92 ZX7R LEFT RADIATOR GUARD
Kawasaki ZX7R Left radiator guard
This is the inner panel that finished the inside of the fairing off between the front edge of the fairing and the radiator. A lot of guys don’ t use these pieces anymore, but if you want to we have them available.
(Image 1) ZX7R7
ZX7R7 - 91/92 ZX7R RIGHT RADIATOR GUARD
Kawasaki ZX7R Right radiator guard
This is the inner panel that finished the inside of the fairing off between the front edge of the fairing and the radiator. A lot of guys don’ t use these pieces anymore, but if you want to we have them available.
(Image 1) ZX7R5
ZX7R5 - 91/92 ZX7R FRONT FENDER
fender
Replace your busted or scratched up fender on your Kawasaki ZX7 with our lightweight fiberglass fender. Simply drill the mounting holes, mount onto your chassis, and go for a ride. As you can see, we sell this part in fiberglass, bit it is also available in carbon fiber. Call our sales reps for pricing today!
(Image 1) ZX7R4
ZX7R4 - 91/92 ZX7R SUPERSPORT RACE SEAT
Kawasaki ZX7R Super sport race tail
What we have here is a direct replacement for the R style of race seat for the Kawasaki ZX7 and ZX7R chassis. This is perfect for that race bike restoration of custom street bike application. Get yours today!
(Image 1) ZX7R3
ZX7R3 - 91/92 ZX7R LEFT LOWER
Kawasaki ZX7R Left side lower fairing
This is an affordable replacement panel for an impossible piece to find. If you find this panel in the salvage yards it will be all dried up and impossible to restore, you never know what scum you’ re going to get on e-bay, and lord know that Kawasaki wants way to much for there parts. So what are you going to do? Get our piece, of course! This panel is identical in exterior size and shape to the stock Kawasaki piece with the exception that we do not do the tabs on the inside for the radiator guards. That’ s no big deal though; a crafty guy can figure it out in a matter of minuets and save himself a ton of money. Freshen up the look of your Kawasaki ZX7R with our side fairings today!
(Image 1) ZX7R2
ZX7R2 - 91/92 ZX7R RIGHT LOWER
Kawasaki ZX7R Right lower
This is an affordable replacement panel for an impossible piece to find. If you find this panel in the salvage yards it will be all dried up and impossible to restore, you never know what scum you’ re going to get on e-bay, and lord know that Kawasaki wants way to much for there parts. So what are you going to do? Get our piece, of course! This panel is identical in exterior size and shape to the stock Kawasaki piece with the exception that we do not do the tabs on the inside for the radiator guards. That’ s no big deal though; a crafty guy can figure it out in a matter of minutes and save himself a ton of money. Freshen up the look of your Kawaski ZX7R with our side fairings today!