(Image 1) H2R2M
H2R2M - 73 KAW H2R SEAT MODIFIED BACK
Measurements, fitment, and other pictures...
Kawasaki H2R seat – modified
This is a modified Kawasaki H2R seat, it is more tapered and has a slimmer profile than the standard seat. It’s a tight fit and the seat rails will have to be cut right behind the shocks. This is the seat on the green bike in the pictures above.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) OCP1 - OIL CONTAINMENT BELLY PAN 4-CYL
(Image 2) OCP1 - OIL CONTAINMENT BELLY PAN 4-CYL
(Image 3) OCP1 - OIL CONTAINMENT BELLY PAN 4-CYL
(Image 4) OCP1 - OIL CONTAINMENT BELLY PAN 4-CYL
OCP1 - OIL CONTAINMENT BELLY PAN 4-CYL
Vintage race belly pan / oil containment – large
This universal belly pan will fit most large 70s/80s Japanese motorcycles with 4-1 exhaust. It will hold a few quarts of oil per AHRMA/WERA requirements. Originally designed for Kawasaki Z1. Trimming around exhaust and kickstand is required.
Measurements:
Overall length: 26.5"
Inside length between f/r dams: 22"
Width front: 11.5"
Width back: 10.25"
Depth (center): 4.5"
(Image 1) NOSE1
NOSE1 - UNIV. VINTAGE NOSE SCOOP 4-CYL.
NOSE1
Kawasaki Z1R Chin scoop
Period correct piece for big fours. Width (inside) is right around 15".
H2R4M - H2R FENDER - WIDE
Kawasaki H2R Front fender
This is a wider version of the H2R4 above, designed for the wider KZ1000 Police front end. Width 5".
(Image 1) H2R4 - 73 KAW H2R FRONT FENDER
H2R4 - 73 KAW H2R FRONT FENDER
Kawasaki H2R Front fender
This Kawasaki triple race fender is what you want if you’ve dropped your front wheel size to an 18" for better handling. Fits stock Z1/KZ650/900/1000 forks. Width 4.5".
(Image 1) H2R2 - 73 KAW H2R SEAT
H2R2 - 73 KAW H2R SEAT
Kawasaki H1 / H2 triple Hansen race / cafe seat
This is the wide Hansen-style seat that is wider, taller and longer than the original skinny seat, to fit the Hansen H2R frames. It’s wide enough to slip over the wider stock H1/H2 frame.
(Image 1) BTK1
BTK1 - BIMOTA TANK FOR KAWASAKI Z1/KZ
Kawasaki Z1 KZ900 KZ1000 race fuel tank
If you are building a road race bike or a cafe racer based on a KZ900 or KZ1000 you want to take a look at this tank. It’s got a big old tunnel to accomodate the KZ’s triple backbone. We have built in two slots so it slides onto the standard rubber tank mounts in the front. You will have to make a metal strap that goes accross the frame and clamps the tank down over the rubber mounts. Two 6mm inserts are already molded into the tank bottom to fasten this strap. There is a big tab in the back so you can create a tank mount. All the hard work is done…
*shown with optional Monza cap
Z15 - KAWASAKI Z1 CHAIN GUARD
Kawasaki Z1 chain guard.
This is a a replacement chain guard for your Kawasaki Z1.
Z14 - KAWASAKI Z1 REAR FENDER
Kawasaki Z1 rear fender
This is a a replacement rear fender for a Kawasaki KZ1000.
Z11 - KAWASAKI Z1 FRONT FENDER
Kawasaki Z1 Front fender
Nice lightweight Kawasaki Z1 front fender with a 19" radius.