YZF 1000 R1 '98-'99
Way before the R1 "TORNADO" was released everyone knew it was going to be a hot model. That’s why our connections over in the great white north, Canada and across the pond in Europe started sending us body parts. Even before these parts were released in the country we had bodywork. We were able to get all the tooling done and have bodywork ready for Yamaha Factory Team, Graves Motorsports to go racing.
Not only did we duplicate the stock upper fairing, right and left sides and belly pan, but we also made a superbike style fairing that incorporates the upper and the right and left center sides into a one-piece fairing. We then modified the belly pan for AMA, FIM oil containment rules. We made a one-piece solo race seat, front fender, rear swing arm fender, heel guards and chain guards.
So if your thinking about racing your R1, take off your expensive stock body and save it. We can lighten up your bike and make it go faster.
If you dropped it or – as in most cases – had your buddy ride it and the %$^@! dropped it, you need to replace your fairings. Give us a call, we have what you need!
(Image 1) GL48
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GL48 - 00/01 YZFR1 SET SUPERSPORT TAIL
Yamaha YZF 1000 R1 Race body kit
This is an affordable body kit for all of you racers out there! This kit includes our YZFR11C competition upper fairing, our YZFR14M oil containment belly pan, our YZFR15 super sport race tail, and our YZFR17 front fender assembly.
Please note: uses ’00/’01 R1 windscreen.
(Image 1) YZFR19
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR19 - 98/01 YZFR1 PRESSURIZED AIRBOX
Yamaha YZF 1000 R1 Air box kit
we developed this pressurized airbox kit for Team Graves. This airbox pulls in the air above the radiator below the top tripple clamps, feeds it into a large 18-liter box and pressurizes the bell mouth of the carbs.
Rejetting required. You need our YZFR19JK rejet kit below. Race purposes only.
(Image 1) YZFR116
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR116 - 98/00 YZFR1 U/S ENCSURE HIDDEN LGT
Yamaha YZF 1000 R1 Undertail – under seat enclosure – modified tail light
This street undertail is modified to run an aftermarket taillight.
(Image 1) YZFR114
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR114 - 99/00 YZFR1 U/SEAT ENCLOSURE RACE
Yamaha YZF 1000 R1 Undertail – under seat enclosure – race
Under seat enclosure race, remove all that heavy black plastic under seat rear fender assembly and lighten up the back of your race bike. This race piece attaches inside of our super sport or super bike race tail and cleans off the inside bottom of your race bike. This is a must have to finish off the underside of your race bike.
(Image 1) YZFR113
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR113 - 98/00 YZFR1 U/SEAT ENCLOSURE STOCK
Yamaha YZF 1000 R1 Undertail – under seat enclosure – stock taillight
Very cool undertail that cleans off the underneath of your tail section. Simply hack out all of that stock black, plastic crap that sticks below your body panels and mount our lightweight fiberglass piece underneath there. Custom paint or color-match the rest of your bodywork for a cool street look. One thing that you may notice is that our under tail has a license plate bracket already molded into it so there are no ugly brackets needed to mount your license plate on it. This is a cool piece! Get yours today!
(Image 1) YZFR111
(Image 2) YZFR111
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR111 - 98/99 YZFR1 CARBON CHAIN GARD
Yamaha YZF 1000 R1 Carbon chain guard
This piece is a direct bolt on replacement for your stock plastic chain guard. This chain guard is made out of real carbon fiber and is an awesome addition to your R1.
(Image 1) YZFR110
(Image 2) YZFR110
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR110 - 98/99 YZFR1 CARBON HEAL GARDS
Yamaha YZF 1000 R1 Carbon fiber heel guards
These carbon fiber pieces replace the aluminum heel guards on your stock R1 foot peg assemblies. These heel guards are definitely the coolest on the market. They are not flat; they have a nice curved shape to them that increases the structural rigidity. If you want some cool carbon bling for you R1 these are it.
(Image 1) YZFR16
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR16 - 98/01 YZFR1 SWING ARM FENDER
Yamaha YZF 1000 R1 Rear swing arm fender
This is a direct replacement for the rear fender that mounts onto the swing arm of your R1. This fender keeps crap from being thrown up and around your shock absorber and the engine area of your motorcycle. As you can see, we sell this part in fiberglass but it is also available in carbon fiber. Call our sales reps for a price on the carbon fiber version today!
(Image 1) YZFR17
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR17 - 98/01 YZFR1 FRONT FENDER
Yamaha YZF 1000 R1 Rejet kit for YZFR19
(Image 1) YZFR15B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR15B - 98/99 YZFR1 SUPERBIKE RACE TAIL
Yamaha YZF 1000 R1 Superbike race tail
This is basically the same as our super sport race tail; the only difference is that the seat pan area is filled in for use with closed cell foam padding, available through us. This is a real race bike tail for real racers! Are ya ready?
(Image 1) YZFR15
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR15 - 98/99 YZFR1 SUPERSPORT RACE TAIL
Yamaha YZF 1000 R1 Supersport race tail
What we have here is one of the most popular race tails on the market for the R1. This is basically the stock R1 tail section with a stylish solo seat cowl molded on top of it, all designed as a one piece unit for racing. It has legal sized number plates in the rear for racing. If you are racing your R1 or want that custom race bike look for your street bike this is the tail section that you need!
(Image 1) YZFR14M
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR14M - 98/01 YZFR1 AMA BELLIPAN
Yamaha YZF 1000 R1 M1 conversion lower fairing w/ oil containment
Minor trimming and fitting required around exhaust.
(Image 1) YZFR13
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR13 - 98/01 YZFR1 LEFT CENTER SIDE
Yamaha YZF 1000 R1 Mid fairing – left
Replacement left mid fairing for your Yamaha R1.
(Image 1) YZFR12
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR12 - 98/01 YZFR1 RIGHT CENTER SIDE
Yamaha YZF 1000 R1 Mid fairing – right
Replacement right mid fairing for your Yamaha R1.
(Image 1) YZFR11S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YZFR11S - 98/99 YZFR1 STREET UPPER
Yamaha YZF 1000 R1 Street upper fairing
Replacement street upper fairing for your Yamaha R1 with both headlights cut out. No tabwork on the inside, but that’s no problem. Call our sales reps and ask ’em how to mount your lights!