YOSHIMURA GSXR 750 WORLD SUPERBIKE '93
During the 93′ season Yoshimura teamed up with Airtech to do some serious development work on the fairing assembly of their Superbike Suzuki GSXR 750.
A competition upper fairing with a shield that runs back below the bottom triple clamp to seal off the space around the radiator to prevent high pressure bleed off. Yosh used a one piece lower that was comprised of the left and right side panels and the radiator shroud. It’s available.
Either Supersport or Superbike race seats were used in conjunction with anti-draft shields in most cases. Now for sale. The team ran the KYB front end with our front fender and finally settled on a premium design for the rear fender. We’ve got’em available.
Airtech also designed an air box assembly and a sprint fuel tank for y’all to put on your bike. So if you’re looking to restore a 1993 water-cooled superbike or are in the process of building a custom street bike, we can make your life much easier.
(Image 1) 1YWCSB1
(Image 2) 1YWCSB1 - 93 YOSH SUPERBIKE COMP UPPER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
1YWCSB1 - 93 YOSH SUPERBIKE COMP UPPER
Suzuki GSXR 750 ’93 Yoshimura WSBK upper fairing
This is the upper part of the 2-piece Yoshimura race fairing. The ducts are still closed in this picture but we can cut them out for you.
Please note: Fork opening needs to be trimmed out.
This upper works with the 2YWCSB2DB lower
(Image 1) 1YWCSB2DB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
1YWCSB2DB - 93 YOSH STRETCHED DRAGBIKE LOWER
Suzuki GSXR 750 ’93 Yoshimura dragbike lower fairing – extended
This is a lower that was modified for dragracing and has an extended oil containment bellypan to be used in conjunction with a +8 arm. Overall length is about 42″.
This piece works with our 1YWCSB1 or 2YWCSB2 upper.
(Image 1) 5GSXRAB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXRAB - 94/95 GSXR750/1100 AIR BOX
Suzuki GSXR 1100 ’95 Yoshimura airbox
Works with:
’95-’98 GSXR 1100 stock upper fairing 6GSXR11C
The larger than stock intake ducts were glassed into the stock upper.
The airbox can also be used with YWCSB1 Yoshimura race upper, which comes with it’s own larger ducts.
We have smooth bore duct hose available separately, click here.
Please note: This is a race air box and may not clear starter/alternator on a street bike. Requires relocation of fuel valve.