Vintage Half Fairings
Vintage Airtech Half Fairings
"Half Fairings", unlike quarter fairings, wrap under the handlebars and extend a little lower.
These are great universal fairings that can be installed with minimal hardware. Because of the added length on the bottom, they may require an additional installation point.
If it's a street bike, just make sure the headlight opening is big enough!
(Image 1) DUCSSS1C
DUCSSS1C - DUC SINGLES "SS" COMPETIT FAIRING
Ducati single SS Competition upper fairing
This is a scaled down version of the 900 SS fairing, without headlight holes for use in racing.
(Image 1) DUC917 - 77/80 900SS FAIRING 7"H/LIGHT LIP
(Image 2) DUC917 - 77/80 900SS FAIRING 7"H/LIGHT LIP
(Image 3) DUC917 - 77/80 900SS FAIRING 7"H/LIGHT LIP
DUC917 - 77/80 900SS FAIRING 7"H/LIGHT LIP
Ducati 750 Sport Half fairing – 7″ opening
This half fairing has a smaller, 7″ headlight opening with a return angling rearwards, to fit a standard 7″ automotive bulb.
This is the same shape as DUC91 but with a return lip that butts up against the headlight lens so the headlight is recessed in the fairing.
(Image 1) DUC91 - 77/80 900SS UPPER FAIRING
DUC91 - 77/80 900SS UPPER FAIRING
Ducati 900 SS Half fairing – 8" opening
We offer this replacement fairing with the larger headlight opening, so teh chrome ring on the headlight will protrude.
This is the half fairing that was used on the Johnny the Boy bike. The chrome lens around the headlight lens will push through the opening.
(Image 1) DUC91C - 77/80 900SS RACE FAIRING
DUC91C - 77/80 900SS RACE FAIRING
Ducati 750 Sport Half fairing – competition
Lastly, we have a competition version for you racers out there who don’t need no stinkin’ headlight at all.
This is also a cool fairing for those who want to install some unobtrusive projector beam headlights for that replica racer look while keeping the bike streetable.
(Image 1) DR450 - DR450 VINTAGE DRAGBIKE FAIRING
(Image 2) DR450
(Image 3) DR450
(Image 4) DR450
(Image 1) DSC11S1P
(Image 2) DSC11S1P - SPORT CLASSIC FAIRING STREET 1-PC
(Image 3) DSC11S1P - SPORT CLASSIC FAIRING STREET 1-PC
DSC11S1P - SPORT CLASSIC FAIRING STREET 1-PC
Ducati Sport Classic half fairing – Street, one piece
One piece version of the Sport Classic Paul Smart half fairing that integrates the upper fairing and the standard, short side fairings into one piece.
The parting seam and turn signal mounts have been eliminated.
(Image 1) DSC11C1P
DSC11C1P - SPORT CLASSIC RACE UPPER 1-PIECE
Ducati Sport Classic half fairing – Competition, one piece
Corsa half fairing. Fits straight onto ’06 Paul Smart and ’07/’08 Sport 1000S.
Will fit the other models (’06 Sport, GT and Biposto) with a Ducati Corse/aftermarket front fairing bracket.
The mounting brackets underneath the gas tank are fairly simple (see pic). It’s just a little zig zag bracket that is sandwiched between the tank mounting cups and the frame. You should be able to make your own!
(Image 1) CON2
CON2 - CONCEPT 250 RACE FAIRING
Concept 250 half fairing - competition
Headlight opening: N/A, but easily cut open.
Width front: 13.5"
Width rear: 13" (top) / 15.5" (bottom)
Height: 9"
Length: 14"
Application:
Universal
This is originally a half fairing but has been mounted as a 1/4 fairing if the bottom ears are trimmed short.
(Image 1) CCF - CLASSIC CAFE FAIRING
CCF - CLASSIC CAFE FAIRING
Classic cafe 1/2 fairing
This sculpted cafe half fairing has fairly tall windscreen height to use either clubman or low BMW style handlebars.
