(Image 1) TZ250AB - 73/74 TZ250/350 A&B FAIRING UPR&LW
TZ250AB - 73/74 TZ250/350 A&B FAIRING UPR&LW
Measurements, fitment, and other pictures...
Yamaha TZ250 Fairing
This is the factory race fairing for the TZ250 A and B models. Comes complete with a removeable belly pan and the triangular upper insert, that fits between the forks.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
Customer Photos and Reviews
Once again we make every screen to order and most often needs custom installation on your part.
You might also be looking for...
(Image 1) VESCO5
(Image 2) VESCO5
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
VESCO5 - INNER PANEL MOUNT FOR VESCO3&4
Vesco bottom mount for seats
Since the Big butt seats are a lot wider than standard TZ seats, this bottom mount takes up the space between the frame and the seat. Makes installation a snap and looks super clean!
Designed for VESCO4, earlier seat without the lip. Needs some work to install with VESCO3 but can be done with some patience (and bondo).
(Image 1) VESCO4 - VESCO BIG BUTT SEAT NO LIP ON BACK
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
VESCO4 - VESCO BIG BUTT SEAT NO LIP ON BACK
Yamaha TZ250 Vesco Big Butt no rear lip
This is the earlier seat that doesn’t have the lip that kicks up in the back, the top is smooth and straight back.
(Image 1) VESCO3 - VESCO BIG BUTT SEAT WITH BACK LIP
(Image 2) VESCO3 - VESCO BIG BUTT SEAT WITH BACK LIP
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
VESCO3 - VESCO BIG BUTT SEAT WITH BACK LIP
Yamaha TZ250 Vesco Big Butt with rear lip
The seat shown is the famous Veco ‘Big Butt’ seat. This particular seat is a later model with the lip or kick up at the rear edge.
(Image 1) VESCO1 - VESCO TZ250/350 TWINS FAIRING
(Image 2) VESCO1 - VESCO TZ250/350 TWINS FAIRING
(Image 3) VESCO1 - VESCO TZ250/350 TWINS FAIRING
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
VESCO1 - VESCO TZ250/350 TWINS FAIRING
Yamaha TZ250 Vesco race fairing – 3-piece
Don Vesco has been around racing for…well almost before asphalt. Back in the 70’s he used to make fairings. Yep, you guessed it… we have the molds now.
this is one of his most popular 70’s designs, a twins or lightweight bike fairing. This was mounted on TZ250’s,TZ350’s and lots of RD’s as well as Brit bikes.
This fairing and the seats below are perfect for a vintage restoration and are legal for all vintage race classes.
(Image 1) TZADS3
(Image 2) TZADS3
(Image 3) TZADS3
(Image 4) TZADS3 - TZ ANTI DRAFT MONO SHOCK SEAT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZADS3 - TZ ANTI DRAFT MONO SHOCK SEAT
Yamaha TZ250 Anti draft tail section
The third version of the aero tail has sculpted sides and a straight top.
Yamaha TZ750 Aero tail section
Overall length: 27″
Seat pan lenght: 10″
Width front: 8.75″
Widest point: 11.5″
(Image 1) TZADS2
(Image 2) TZADS2
(Image 3) TZADS2
(Image 4) TZADS2 - TZ MONOSHOCK ANTI DRAFT TAIL
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZADS2 - TZ MONOSHOCK ANTI DRAFT TAIL
Yamaha TZ250 Anti draft tail section
The second version of the Aero tail is 2" shorter and shaped slightly different.
(Image 1) TZADS1
(Image 2) TZADS1
(Image 3) TZADS1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZADS1 - TZ MONOSHOCK ANTI DRAFT TAIL
Yamaha TZ250 Anti draft tail section
Additionally, we have the TZ250 anti-draft seat originally designed by Floyd Emde, which was a factory test option in the late 70’s and early 80’s. These are super rare pieces and we believe that Airtech is the only company in the world reproducing this fine old TZ part. Damn, are we good, or what?
(Image 1) TZ250ABS - 73/74 TZ250/350 A&B SEAT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZ250ABS - 73/74 TZ250/350 A&B SEAT
Yamaha TZ250 / TZ350 Tail section
Factory race seat.
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZ250ABF - 73/74 TZ250/350 REAR FENDER
Yamaha TZ250 Rear fender
Fits ’72 and up left side drive models.