(Image 1) TL19
TL19 - 97/02 TL1000S UNDER SEAT ENCLOSURE
Measurements, fitment, and other pictures...
Suzuki TL1000 S Under seat enclosure
This sleek fiberglass design cleans up the bottom of your tail section. It takes a little bit of cutting and fabrication to install. You need to hack off a lot of that black plastic off of the back of your TL but the reward is well worth it! This piece has a license plate mount incorporated into the rear of it the cool thing about this is that it uses your stock Suzuki DOT approved taillight. Our competitors tail sections use dangerously dim LED’s on the rear of them, which is not a good idea. Please stick to your DOT approved taillight. This is by far the coolest under seat for the TL that is available!
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) TL11C
TL11C - 97/02 TL1000S COMPETITION UPPER
Suzuki TL1000 S Competition upper
These TL’s are pretty successful in the lightweight twins class, and people relied on Air-Tech to supply them with the bodywork. This is basically the right and left fairing sides and the headlight area all molded as a one-piece unit. The headlight has been filled in for racing purposes and has a legal sized number plate area on the front of it. Whether your racing your TLS or looking for a fairing for a custom street bike application this is the piece you need!
(Image 1) TL11S
TL11S - 97/02 TL1000S STREET UPPER
Suzuki TL1000 S Street upper
This is an affordable replacement panel for you TL1000S street bike. Suzuki didn’t sell very many of these bikes, so clean un-busted panels are hard to find for this bike. We have an affordable solution for you! This is basically the right and left fairing upper halves and the air intake duct assemblies all molded as a one-piece unit. This mounts onto the chassis at the stock Suzuki mirror mounts and brackets. A little trimming and fabrication is required to mount this onto the bike, but this is not big deal because a crafty guy can finish this faster than he can finish a 6-pack and save himself a ton of money over the stock Suzuki panel. Clean up your busted up TLS with our new fiberglass bodywork today!
(Image 1) TL12
TL12 - 97/02 TL1000S LOWER W/OIL CONTAINM
Suzuki TL1000 S Lower belly pan
We pulled out all the stops when we designed this belly pan for the TL1000S. It’s cool and stylish design that gives the bike a lighter and more finished look without hiding the motor.
(Image 1) TL14
TL14 - 97/02 TL1000S SUPERSPORT SEAT TALL
Suzuki TL1000 S Super sport race tail tall
This is the right and left seat sides and tail light area and the stock solo seat cowl all molded together as a one piece unit. This tail section still uses the Suzuki foam pad on the top of it. This one-piece race tail looks cool!
(Image 1) TL14L
TL14L - 97/02 TL1000S SUPERSPORT SEAT LOW
Suzuki TL1000 S Low super sport race tail
This tail is similar to our other super sport race tail for the TLS with the exception that the hump in the back is lower. Basically you have the right and left seat sides, the tail area, and the solo seat cowl molded as a one piece unit with the exception that the solo seat cowl is lower and it does not make that big wart on the top hump in the rear.
If you ride your TLS you know what we mean. When you try to throw your leg over the back of it that Suzuki wart is too tall and you end up hitting your boot. You’ve got to really kick your leg up high to get over the back of that nasty thing. This low section solves that problem, and it looks pretty awesome. Toss out that wart and throw your leg over something cool! Get our tailpiece today!
(Image 1) TL15
TL15 - 97/02 TL1000S FRONT FENDER
Suzuki TL1000 S Front fender
This is a direct replacement front fender for your TL1000S. Simply drill the mounting holes, install it onto your chassis, and go for a ride. As you can see, we sell this panel in fiberglass but it is also available in carbon fiber. Call our sales reps for a price today!
TL16 - 97/02 TL1000S/R-GSXR600 REAR FENDE
Suzuki GSXR 600 Rear fender
Tired of having rocks and crud thrown on your shocks and motor? Suzuki should have put one of these on straight from the factory. We rectified their mistake. Easily installed onto the swingarm.
(Image 1) TL19L
TL19L - 97/02 TL1000S LEFT INNER DASH
Suzuki TL1000 S Left dash panel
This is an affordable fiberglass replacement panel for your TL1000 dash. It is also available in carbon fiber.
(Image 1) TL19R
TL19R - 97/02 TL1000S RIGHT INNER DASH
Suzuki TL1000 S Right dash panel
This is the replacement dash panel for the right side of your TL1000S. This piece is sold in fiberglass but it is also available in carbon fiber.