SUZUKI GSXR750 1996-99
A bit of history… In 1995, while the rest of the country was taking the winter off, Airtech was working on the ’96 GSXR bodywork. Suzuki would be releasing its new line in Las Vegas and Airtech was working on reproduction bodywork so we could get started on supplying their factory race teams.
This racing heritage is the reason we have such a vast selection of GSXR bodywork, including not one but two styles of race fairings – one of them developed for Yoshimura – air box assemblies and even a drag body.
Shown on the left is our GSXR Supersport fairing assembly with a Superbike tail.
This is the Yoshimura Superbike bodywork. The lines on this front fairing assembly are more aggressive, just look at the leading edge of that upper fairing.
(Image 1) 6GSXR710
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR710 - 96/97 GSXR750 KIT AIRBOX W/DUCTS
Suzuki GSXR 600 Air box assembly
Yoshimura factory airbox. Fits carburated models only.
(Image 1) 6GSXR710D
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR710D - 96/99 GSXR750 A/BOX DUCTS (PAIR)
Suzuki GSXR 600 Air ducts
Replacement air ducts (left and right).
(Image 1) 6GSXR711
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR711 - 96/99 GSXR750 FUEL TANK
Suzuki GSXR 600 Fuel tank
Do you want to knock some weight off of your GSXR? Check out our fiberglass replacement tank! It means a huge weight saving off the top of your bike. The bike will feel lighter and will flick from right to left side effortlessly. The tank uses one of our lightweight racing gas caps on the top, and has a 3/8″ bung on the bottom for use with a Pingel fuel valve, available through us.
(Image 1) 6GSXR712
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR712 - 96/99 GSXR750 UNDER SEAT ENCLOSURE
Suzuki GSXR 600 Undertail – street
Hack out all that ugly plastic crap underneath your tail section and install one of our cool fiberglass under seat enclosures.
This piece uses your stock DOT approved tail light assembly so you don’t have to worry about someone rear ending you like happens with guys using undertails with dim LED lights. Those pieces are pretty unsafe, ours uses the stock DOT taillight.
Our piece also has a license plate bracket molded into it so you don’t have to fabricate or bend any pieces of metal like our competitors under seat enclosures. Simply hack out your black plastic pieces, do a little bit of cutting and trimming, and custom paint this under seat enclosure for an awesome custom street bike.
Does not work with ’01 style tail.
(Image 1) 6GSXR71C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR71C - 96/99 GSXR750 COMPETITION UPPER
Suzuki GSXR 600 Competition upper fairing
This piece is identical in shape to the street fairing, but we’ve filled in the headlight holes for competition use. This is also the perfect piece for a custom headlight install. Cut your own headlight opening and install some trick headlights.
(Image 1) 6GSXR71S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR71S - 96/99 GSXR750 STREET UPPER
Suzuki GSXR 600 Street upper fairing
Do you need an affordable crash replacement upper fairing for your street bike? We’ve got what you need! Our lightweight fiberglass part is identical in exterior shape to the stock Suzuki piece with the exception that we do not do the headlight tabs on the inside of the part. But that’s not big deal, they’re not necessary to mount this fairing onto your chassis. Our sales reps have the fix for you, give them a call today and the will be happy to explain how its done. A crafty guy could mount this onto his bike in a couple hours and save himself hundreds of dollars. Get yours today!
(Image 1) 6GSXR72
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR72 - 96/99 GSXR750 RIGHT LOWER
Suzuki GSXR 600 Right lower fairing
Replace your crash damaged panel with one of our lightweight affordable fiberglass pieces. A crafty guy with a little skill level can have this baby drilled and mounted on his bike faster than he can finish a 6 pack. Get yours today!
(Image 1) 6GSXR73
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR73 - 96/99 GSXR750 LEFT LOWER
Suzuki GSXR 600 Left lower fairing
Replace your crash damaged left lower panel with our lightweight fiberglass piece today!
(Image 1) 6GSXR74ADS
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR74ADS - 96/99 GSXR750 U/SEAT ENCLOSE RACE
Suzuki GSXR 600 Undertail – race
Remove all that heavy black plastic under seat rear fender assembly and lighten up the back of your race bike. This race piece attaches inside of our supersport or super bike race tail and cleans off the inside bottom of your race bike. This is a must have to finish off the underside of your race bike.
Does not work with ’01 style tail.
(Image 1) 6GSXR74B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR74B - 96/99 GSXR750 SUPERBIKE TAIL
Suzuki GSXR 600 Super bike tail
What we have here is one of our one-piece race tails. We’ve taken the right and left seat sides, the solo seat cowl area, and the tail light area and molded it into a one-piece unit. We call this tail light super bike tail because the seat pan area where the rider sits is filled in and flat and uses close cell race padding instead of the stock upholstery. This is a race legal tail section for most racing organizations and is a cool tail section for custom street bikes. Get one today!
You will need to install support bracket 6GSXR74SB (shown below) underneath the seatpan to support the rider’s weight.
(Image 1) 6GSXR74C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR74C - 96/99 GSXR750 01 STYLE S/BIKE TAIL
Suzuki GSXR 600 Super bike tail – ’01 style
What we have here is quite possibly the coolest tail for the GSXR750. This ’01 style tail is a low and sleek design that will make your tail look a lot less bulky. This tail will not accept the stock taillight or undertail, but you can make the ’01 style of undertail work. Click here to see the ’01 undertails: 7GSXR79 or 7GSXR79R for the race version.
(Image 1) 6GSXR74S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR74S - 96/99 GSXR750 SUPERSPORT TAIL
Suzuki GSXR 600 supersport race tail
This is our one-piece race tail for the GSXR. It incorporates the tail section area and the solo seat cowl all molded as a one-piece unit. The tail light area is filled in for race purposes but is easily cut open for street use. The seat has an open pan area that uses your stock upholstery. This tail section is race legal for most race organizations or can be used on a street bike for a custom race bike look. Get yours today!
(Image 1) 6GSXR74SB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR74SB - 96/99 GSXR750 SUPERBIKE TAIL BRAKT
Suzuki GSXR 600 Seat Bracket
Use this seat bracket to support the riders weight when using one of our Superbike race tails. You will need to drill some mounting holes in the subframe to mount this bracket. This is a quick and easy installation.
(Image 1) 6GSXR75
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR75 - 96/99 GSXR750 FRONT FENDER
Suzuki GSXR 600 GSXR 600 Front fender
This is a direct replacement fender for your GSXR. Simply drill the mounting holes, bolt on your bike, and then go for a ride! Price is for fiberglass but this fender is also available in carbon fiber. Ask your sales rep for a price today!
(Image 1) 6GSXR76
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR76 - 96/99 GSXR750 SWING ARM FENDER
Swing Arm Fender