SUZUKI GSXR 750 '90
The ’90 Suzuki GSXR 750 Slingshot differs slightly from the ’88-’89 model. The return on the upper fairing is slightly different and the vents on the mids are deeper and more square in shape than the earlier ones. We make all these pieces and much much more, so you can spruce up your ride with some new skins today!
(Image 1) 2GSXR710
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR710 - 88/92 GSXR750 YOSH FRAME CARB CVRS
Suzuki GSXR 750 Yoshimura carb covers
These carb covers are almost impossible to find, but we have them.
These covers are easily installed onto your chassis with zip ties (recommended) but we've seen velcro used too.
(Image 1) 2GSXR711
(Image 2) 2GSXR711
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR711 - 88/92 GSXR YOSH DRY CLUTCH DUC
Suzuki GSXR 750 Yoshimura dry clutch duct
Another hard to find Yosh part! This is the small Yoshimura dry clutch naca duct that routes cool air to the dry clutch - or standard clutch for that matter. Cut a small hole in your stock or race fairing and rivet this little piece in. Only available from Airtech!
(Image 1) 2GSXR74
(Image 2) 2GSXR74
(Image 3) 2GSXR74 - 88/92 GSXR750/1100 1 PIECE LOWER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR74 - 88/92 GSXR750/1100 1 PIECE LOWER
Suzuki GSXR 750 Lower fairing
This is the lower belly pan for your GSXR. This is the right and left side and the T-section behind the tire all molded as a one-piece unit. This lightweight fiberglass piece replaces your crash damaged bodywork.
(Image 1) 2GSXR74YR
(Image 2) 2GSXR74YR
(Image 3) 2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
(Image 4) 2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
Suzuki GSXR 750 Yoshimura Lower fairing
This is a Yoshimura race belly pan for your GSXR. It is a one piece unit with a closed and extended bottom. Originally designed for the GSXR750 with a 4-1 race system, may require modification to work with your exhaust system especially on a GSXR1100.
Requires trimming around the kickstand for use on a street bike.
(Image 1) 2GSXR75
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR75 - 88/90 GSXR750/1100 SUPERSPORT TAIL
Suzuki GSXR 750 Supersport race tail
This is a cool one-piece race tail for your GSXR. This tail section is already cut out for the stock taillight. Works with the stock GSXR 750 upholstery.
(Image 1) 2GSXR76
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR76 - 88/90 GSXR750 FRONT FENDER
Suzuki GSXR 750 Front fender
Straight replacement for your busted stock fender. Drill the mounting holes, bolt it up and go riding.
(Image 1) 2GSXR77L
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR77L - 88/92 GSXR750/1100 LOWER REAR FNDR
Suzuki GSXR 1100 Lower rear fender
This lower rear fender attaches below the swing arm to help keep the shock and linkage clean.
(Image 1) 2GSXR78
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR78 - 88/90 GSXR750 NUMBER PLATE
Suzuki GSXR 750 Number plate
This is a cool piece for track days or a custom headlight install. It covers up the stock headlight opening.
(Image 1) 2GSXR79
(Image 2) 2GSXR79
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR79 - 88/90 GSXR750 AIR INTAKE GRABBER 2
Suzuki GSXR 750 air grabbers – pair
These sculpted air grabbers do just that, they enlarge the intake area, ‘grab’ air and force it into the ducts. This greatly enhances the flow over the stock ducts.
These covers are easily installed onto your upper fairing with pop rivets
(Image 1) 2GSXRST
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXRST - 88/92 GSXR750/1100 SPRINT TANK
Suzuki GSXR 750 Fuel tank - Sprint
This is a slammed style race fuel tank for you GSXR. You can save quite a few pounds off the top of your bike with this lightweight fuel tank. It comes with one of our flush racing caps on the top and a 3/8" NPT bung in the bottom of the tank for use with a Pingel race valve.
(Image 1) 3GSXR71C
(Image 2) 3GSXR71C - 90 GSXR750 COMPETITION UPPER
(Image 3) 3GSXR71C - 90 GSXR750 COMPETITION UPPER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR71C - 90 GSXR750 COMPETITION UPPER
Suzuki GSXR 750 Competition upper fairing
We made this race part for Yoshimura, they asked for a lower windscreen height so this fairing is an inch lower than stock. The thick return in the handlebar opening was because they didn’t run a windscreen bracket on their race bikes and the fairing ears needed to be self supporting. You can install this fairing on your standard fairing bracket, you’ll have to bend the mirror mounts down an inch or so to suit.
(Image 1) 3GSXR71E
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR71E - 90 GSXR750 ENDURANCE UPPER
Suzuki GSXR 750 Endurance upper fairing
This is identical in exterior shape to the stock GSXR upper fairing with the exception that one headlight hole has been filled in for endurance race purposes. You get the best of both worlds: one headlight, weight saving, room for a number and that classic endurance style look!
(Image 1) 3GSXR71S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR71S - 90 GSXR750 STREET UPPER
Suzuki GSXR 750 Street upper fairing
This is a direct replacement fairing, just the turn signal holes have been filled in. Simply drill the mounting holes and mount onto your chassis. Replace your crash damaged bodywork with our lightweight fiberglass piece!
(Image 1) 3GSXR72
(Image 2) 3GSXR72 - 90/92 GSXR750 RIGHT CENTER SIDE
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR72 - 90/92 GSXR750 RIGHT CENTER SIDE
Suzuki GSXR 750 Right Mid
This is a direct replacement panel for the right mid side of your GSXR.
(Image 1) 3GSXR73
(Image 2) 3GSXR73 - 90/92 GSXR750 LEFT CENTER SIDE
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR73 - 90/92 GSXR750 LEFT CENTER SIDE
Suzuki GSXR 750 Left Mid
This is a direct replacement panel for the GSXR left side mid panel.