SUZUKI GSXR 750 '88-'89
The ’88-’89 Suzuki GSXR 750 Slingshot is unquestionably a fine looking piece of equipment. Airtech has everything you could ever need in the bodywork department for this bike, so there is no excuse for not making your machine look perfect.
We’ve got three different uppers to choose from. First the stock upper with dual headlight holes. We also have an endurance upper with a single hole on the left side. Finally there is the competition upper with no openings at all. This last part can be modified to accept a little trick headlight if you’re running it on the street.
Additionally, we’ve got the front center pieces for both sides of the fairing and a one piece belly pan.
We also have an array of offerings in the seat department, a one piece, stock-appearing, solo race seat, a Yoshimura water-cooled GSXR replica rear end, or the Yoshimura F1 seat. In the fender department, we’ve got both front and rear available.
We also make a rear fender that hangs below the swing arm to ward off heat and oil from the motor and protect the rear tire.
Whip your ride into shape, lighten’er up, and attach some extra bonus goodies. Your bike will never look the same!
(Image 1) 2GSXR710
2GSXR710 - 88/92 GSXR750 YOSH FRAME CARB CVRS
Suzuki GSXR 750 Yoshimura carb covers
These carb covers are almost impossible to find, but we have them.
These covers are easily installed onto your chassis with zip ties (recommended) but we've seen velcro used too.
2GSXR711 - 88/92 GSXR YOSH DRY CLUTCH DUC
Suzuki GSXR 750 Yoshimura dry clutch duct
Another hard to find Yosh part! This is the small Yoshimura dry clutch naca duct that routes cool air to the dry clutch - or standard clutch for that matter. Cut a small hole in your stock or race fairing and rivet this little piece in. Only available from Airtech!
(Image 1) 2GSXR74
(Image 2) 2GSXR74
(Image 3) 2GSXR74 - 88/92 GSXR750/1100 1 PIECE LOWER
2GSXR74 - 88/92 GSXR750/1100 1 PIECE LOWER
Suzuki GSXR 750 Lower fairing
This is the lower belly pan for your GSXR. This is the right and left side and the T-section behind the tire all molded as a one-piece unit. This lightweight fiberglass piece replaces your crash damaged bodywork.
(Image 1) 2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
(Image 2) 2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
(Image 3) 2GSXR74YR
(Image 4) 2GSXR74YR
2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
Suzuki GSXR 750 Yoshimura Lower fairing
This is a Yoshimura race belly pan for your GSXR. It is a one piece unit with a closed and extended bottom. Originally designed for the GSXR750 with a 4-1 race system, may require modification to work with your exhaust system especially on a GSXR1100.
Requires trimming around the kickstand for use on a street bike.
(Image 1) 2GSXRST
2GSXRST - 88/92 GSXR750/1100 SPRINT TANK
Suzuki GSXR 750 Fuel tank - Sprint
This is a slammed style race fuel tank for you GSXR. You can save quite a few pounds off the top of your bike with this lightweight fuel tank. It comes with one of our flush racing caps on the top and a 3/8" NPT bung in the bottom of the tank for use with a Pingel race valve.
(Image 1) AT26M
AT26M - AIRTECH REAR FENDER - MODIFIED
Suzuki GSXR 750 Rear fender
This hugger is a brand new Airtech design for aftermarket overbraced 1st and 2nd gen GSXR750 swingarms like SPF where the brace runs parallel to the arm.
Fit it to modified street & race bikes to keep the rear shock, motor and carbs clean.
Inside width 9"
Outside width 11.75"
Fender length 13"
Depth 6.5"