SUZUKI GSXR 750 '86-'87
Just call us the GSXR Fairings Warehouse. We’ve got everything you could possibly want for the first modern racer replica sport bike, the classic GSXR 750.
Can you say GSXR 750 fairings? We have a street upper with the headlight hole cut open or a competition upper with the left and right center sides molded onto it to form a one piece race fairing. There are also left and right sides of several types to choose from:
One style has the stock appearance; the other has three louvers that evacuate more air out of the radiator, which makes the bike run cooler.
The belly pan/lower fairing is a one-piece unit that is a breeze to install compared to the multi-piece stock setup.
We have a few GSXR 750 tail sections to offer. One tail that incorporates the left and right side pieces, the tail light frame, solo seat cowl and license plate area in one seamless piece. This allows you to attach the seat and tail section in one swoop using the stock seat locks and the two 6mm fairing screws by the foot pegs. We also have the Limited Edition one-piece race seat. But wait, there’s more! We make a solo seat cowl, a front number plate, cool air ducts to route cool air to the carburetor area, drag bike bodywork, a fuel tank, and even more. Really, there’s no reason not to upgrade your bike, lighten it up, replace damaged bodywork, or just plain old customize the Bejesus out of it. Airtech can help make your bike’s wildest dreams become a reality.
(Image 1) 2GSXR77
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR77 - 88/89 GSXR750 REAR FENDER N
Suzuki GSXR 1100 Rear fender
Replacement for the busted stock rear fender. This rear hugger mounts to the four vertical metal tabs on the swingarm.
Please note: Swingarm swaps are pretty common on these models so please look at the fender mounts on your swingarm.
If your swingarm has only one vertical tab and 3 inserts, use 90-92 rear fender 3GSXR77 which has 3 horizontal mounting tabs.
(Image 1) CGSXR74
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CGSXR74 - 87 CAN GSXR750/1100 RIGHT LOWER
Suzuki GSXR 750 Lower fairing – right
This is a right side lower fairing for your GSXR.
(Image 1) CGSXR75
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CGSXR75 - 87 CAN GSXR750/1100 LEFT LOWER
Suzuki GSXR 750 Lower fairing – left
This is a left side lower fairing for your GSXR
(Image 1) GSXR77
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR77 - 86/87 GSXR750/11 SUPER SPORT SEAT
Suzuki GSXR 750 Street tail
This is a one-piece race tail for the guys who want to have a passenger provision. This is the right and left seat sides and the right and left tail section all molded as a one-piece unit. This also uses your stock upholstery, and is a cool direct replacement for your crash damaged bodywork.
(Image 1) GSXR77L
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR77L - 86/87 GSXR750 LTD SUPER SPORT SEAT
Suzuki GSXR 750 LTD Tail
This is a direct replacement of the Limited Edition tail section available for the GSXR750.
(Image 1) GSXR77S - 86/87 GSXR750/11 OEM SEAT SIDES
(Image 2) GSXR77S - 86/87 GSXR750/11 OEM SEAT SIDES
(Image 3) GSXR77S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR77S - 86/87 GSXR750/11 OEM SEAT SIDES
Suzuki GSXR 750 Street tail
This is a one-piece race tail for the guys who want to have a passenger provision. This is the right and left seat sides and the right and left tail section all molded as a one-piece unit. This also uses your stock upholstery, and is a cool direct replacement for your crash damaged bodywork.
(Image 1) GSXR78
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR78 - 86/87 GSXR750/11 SEAT COWL
Suzuki GSXR 750 Solo seat cowl
This is a direct replacement cowling for your GSXR. Attach this to the rear part of your upholstery.
(Image 1) GSXR79
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR79 - 86/87 GSXR750/11 HEADLIGHT COVER
Suzuki GSXR 750 Number plate
This is a cool piece for track days or a custom headlight install. It covers up the stock headlight opening.
(Image 1) GSXR7RS - GSXR750/1100 REARSETS
(Image 2) GSXR7RS - GSXR750/1100 REARSETS
(Image 3) GSXR7RS - GSXR750/1100 REARSETS
- We fabricate each part to order. clear or tinted, in 14 different colors.
- Fabrication Lead Time UPDATE: Most windshield orders will ship within 2 weeks.
- We use the highest grade acrylic you can get your hands on.
- *This screen requires drilling or custom installation.
- Also includes a FREE ACRYLIC DRILL BIT AND PRACTICE PIECE!
- Of course, all products require installation once you receive. Common sense is also required.
GSXR7RS - GSXR750/1100 REARSETS
Suzuki GSXR 750 CNC Rearsets
Leave it up to Airtech to supply you with cool parts you can’t get anywhere else in the world! These race tested CNC rearsets are of the highest quality and will improve ground clearance, grip and shift action of your slabside GSXR750 or GSXR1100. Perfect for racing, track bike or hot rod street bike.
Rearset kit complete with:
– Thick, one-piece CNC rearset plates
– Grippy, knurled footpegs with Teflon end plug
– CNC brake and shift evers on dual bearings – smooth action
– Rubber tipped levers
– Frame mounting bolts and all other hardware, heim joints and shift rod
– Uses OEM master cylinder and shift link
– Regular or GP shift pattern
Please note:
These rearsets do not have the lower mounting points for OEM bodywork. You can make simple brackets and attach them to the back of the rearsets like Yoshimura used to do.
There is no brake light switch provision. You will need a switched banjo bolt to retain that function, available below, part# SWITCH4.
(Image 1) GSXRFT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXRFT - 86/87 GSXR750/1100 FUEL TANK
Suzuki GSXR 750 Fuel tank
This is an endurance style fuel tank for your GSXR. The bottom has been filled in where the airbox used to go to enlarge the fuel capacity. The top basically has the same shape as the stock 86 tank but was modified for dual dry break mounts. It now comes with one of our racing caps on the top and a 3/8″ NPT bung in the bottom of the tank for use with a Pingel race valve.
(Image 1) HAMMER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
HAMMER - HAMMER ENDURANCE FAIRING
Hammer half fairing
(Image 1) MORI1M
(Image 2) MORI1M
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
MORI1M - MORIWAKI SUZUKI SEAT - MODIFIED
Suzuki GSXR 750 Moriwaki tail section
This is a modified Moriwaki tail section to suit the first gen GSXR750. The seat pan is a little longer, the back section a little shorter and the number plates a little smaller than the original Moriwaki seat. The back of the tail is scribed for a 86-87 GSXR750 taillight, and a taillight bracket is available below.
You will need to make a support bracket underneath the seat pan to raise the tail section off the seat rails and support the rider’s weight.
Overall length: 27.5″
Seat pan lenght: 12″
Width front: 7.5″
Widest point: 12″ (seat) 13″ (numberplates).
Longer seat pan, shorter rear section, smaller number plates.
(Image 1) YT1 - 86/87 TORNADO UPPER
(Image 2) YT1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YT1 - 86/87 TORNADO UPPER
Suzuki GSXR 750 Yoshimura Tornado Upper
This is the Yoshimura Tornado style bodywork for the GSXR 750. Works only with the YT2 lower belly.
Takes a special windscreen & headlight cover and requires bracket fabrication. It does not use the stock GSXR headlight (we’ve been told CiBie makes a light that fits).
(Image 1) YT2 - 86/87 TORNADO LOWER
(Image 2) YT2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YT2 - 86/87 TORNADO LOWER
Suzuki GSXR 750 Yoshimura Tornado Lower
This is the lower belly pan that fits the YT1 Yoshimura Tornado upper fairing.
(Image 1) YT3
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YT3 - 86/87 TORNADO SUPERBIKE TAIL
Suzuki GSXR 750 Yoshimura Tornado Tail section
This is a real cool designed tail section for the first generation of GSXR chassis. This will not work with a stock GSXR gas tank, because the front of the seat assembly is rounded to work with the Tornado tank as the stock GSXR tank is straight across the back.
If you were to put this on a chassis with a stock GSXR tank you would have a half moon shaped gap in the front of the seat