SUZUKI GSXR 1000 '01-'02
Hottt!!! That’s what we say about our bodywork. We’ve got more GSXR 1000 fairings than you can shake a stick at! Whether you’re looking for a race or street fairing, race tail, undertail or stock replacement lowers, Airtech’s got what you need!
(Image 1) 6GSXR76
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR76 - 96/99 GSXR750 SWING ARM FENDER
Swing Arm Fender
(Image 1) 7GSXR12
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR12 - 01/02 GSXR1000 RIGHT FAIRING LOWER
Suzuki GSXR 1000 Right lower fairing
Lightweight replacement fairing for your damaged right lower. Drill the mounting holes and attach it to all of your stock brackets and use all of your stock hardware. A little fabrication is required down at the lower oil cooler guard behind the front tire. A crafty guy can do that in a few minuets or simply leave that radiator guard off. Save yourself a ton of money over the stock. Factory Suzuki pieces. Get yours today!
(Image 1) 7GSXR13
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR13 - 01/02 GSXR1000 LEFT FAIRING LOWER
Suzuki GSXR 1000 Left lower fairing
Lightweight replacement fairing for your damaged left lower. Drill the mounting holes and attach it to all of your stock brackets and use all of your stock hardware. A little fabrication is required down at the lower oil cooler guard behind the front tire. A crafty guy can do that in a few minuets or simply leave that radiator guard off. Save yourself a ton of money over the stock. Factory Suzuki pieces. Get yours today!
(Image 1) 7GSXR711
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR711 - 00/03 GSXR600/750/1000 GAS TANK
Suzuki GSXR 1000 Fuel Tank
Here is a lightweight racing fuel tank for your GSXR. Yes, we mean lightweight. It’s a tremendous weight saving off the top of your motorcycle. Your bike will handle a lot better, it will flick from right to left hand sides and turn into corners a lot faster without the extra weight on top of your motorcycle.
This race tank is identical in dimensions to the stock fuel tank. The fuel tank mounts to your stock rear-mounting bracket. It comes with a lightweight racing gas cap and has an aluminum flange in the bottom of the tank to use with your stock fuel pump. You can also add additional bungs in the bottom for nitrous or turbo systems. Just ask our sales reps for details. Tank comes with internal venting system. Save a ton of weight off of your bike and be able to increase the handling in your motorcycle by getting one of these fuel tanks today!
(Image 1) 7GSXR711S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR711S - 00/03 GSXR600/750 SLAMMED TANK
7GSXR711S
Suzuki GSXR 1000 Slammed fuel tank
This is an awesome racing gas tank for your GSXR. Not only is this gas tank lighter than your stock fuel tank but this gas tank is slammed and smaller. What we mean by that is that this gas tank is two inches lower in the rear, that part that digs into your stomach, it is two inches lower in the back and the gas tank is actually two inches narrower so you can hold onto the bike at your crotch better and your elbows aren’t restricted when you’re hanging off the side of the motorcycle. Drag racers love this gas tank because it allows them to slide forward and stay over the top of the tank. Road racers love this tank because it allows them to move around the motorcycle more freely than the stock fuel tank does. You will love this gas tank.
The gas tank has aluminum mounting plate in the back to use with your stock mounting brackets and has an aluminum flange to fit your stock fuel pump. It comes with a nice aluminum racing gas cap. Tank has internal venting. Other options include carbon fiber or additional bungs for nitrous or turbo. Whether you are drag racing or road racing your GSXR you need this gas tank. Purchase yours today!
(Image 1) 7GSXR71C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR71C - 00/03 GSXR750/1000 COMPETION UPPER
Suzuki GSXR 1000 Competition upper fairing
This is a great little upper fairing for custom street applications or track day bikes. Track day guys love this fairing because they can take there expensive stock headlight assembly off of there bike, paint our upper fairing put it on there bike and go. Custom street bike guys love this because they can cut different headlight shapes in front of the fairing to butt up against there stock headlights. We’ve seen people cut round headlights, cat’s eyes, even a smiley face cut our of the front of the fairing and had the headlight shining threw in the back. This is a cool piece for your GSXR1000.
(Image 1) 7GSXR71S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR71S - 00/03 GSXR750/1000 STREET UPPER
Suzuki GSXR 1000 Street upper fairing Replace your crash damaged street fairing with one of our lightweight fiberglass pieces. Simply replace all of your bent, busted brackets, drill out mounting holes out of our fiberglass fairing, and mount on your bike and go riding again. Please note that we do not do the tab work on the inside of our fairing for the headlights simply because the headlight is mounted into the metal fairing bracket, the fairing bracket supports the weight of the heavy headlight assembly. Although the headlight was retained in the fairing originally from Suzuki it is not necessary to hold the headlight onto the bike. Simply mount your headlight into your bracket, put the fairing assembly up on your bike, mount the fairing at the mirrors on the top, and mount the fairing on both sides at the lowers on the bottom and go riding. This method holds up great at over a hundred miles per hour. If you have any questions about the headlight mounting assembly call one of our sales reps or our tech guy today.
(Image 1) 7GSXR74B
(Image 2) 7GSXR74B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR74B - 00/03 GSXR750/1000 SUPERBIKE TAIL
Suzuki GSXR 1000 Superbike tail
What we have here is one of our one-piece race tails. We’ve taken the right and left seat sides, the solo seat cowl area, and the tail light area and molded it into a one-piece unit. We call this tail light super bike tail because the seat pan area where the rider sits is filled in and flat and uses close cell race padding instead of the stock upholstery. This is a race legal tail section for most racing organizations and is a cool tail section for custom street bikes. Get one today!
We offer a bracket assembly (7GSXR74SB, shown below) to support the riders weight so the fiberglass tail section doesn’t break.
(Image 1) 7GSXR74S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR74S - 00/03 GSXR750/1000 SUPERSPORT TAIL
Suzuki GSXR 1000 Supersport tail
Our most popular race tail for the GSXR 1000. This tail is right and left seat sides, the solo seat cowl, and tail light area all molded as a one-piece unit. The seat pan area, where the rider sits, is open to use with the stock Suzuki upholstery. This is an easy instillation, drill four mounting holes and mount onto your chassis. This is a race legal tail section for most racing organizations and is also a cool custom street bike tail section, the taillight is easily cut open for street use. Get yours today!
(Image 1) 7GSXR74S4
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR74S4 - 00/03 GSXR750 SUPERSPORT SEAT +4
Suzuki GSXR 1000 Dragbike tail +4
Stretched+4, this tail section is like our 7GSXR74S but only four inches longer. Use your stock upholstery or our stepped drag bike seat pan 7GSXR77 below.
(Image 1) 7GSXR74S6
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR74S6 - 00/03 GSXR750 SUPERSPORT SEAT +6
Suzuki GSXR 1000 Dragbike tail +6
Stretched+6: same tail as our 7GSXR74S but stretched six inches longer than stock. Use your stock upholstery or our stepped drag bike seat pan 7GSXR77 below.
(Image 1) 7GSXR74SB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR74SB - 00/03 GSXR750/1000 S/BIKE BRACKET
Suzuki GSXR 1000 Seat Bracket
Use this seat bracket to support the riders weight when using our 7GSXR74B Super bike race tail. You will need to drill some mounting holes near subsection to mount this bracket. We’ve seen people put rib nuts in the frame, use self-tapping screws, and some people will even popper this into the frame. This is a quick and easy installation.
(Image 1) 7GSXR75
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR75 - 00/03 GSXR750/1000 FRONT FENDER
Suzuki GSXR 1000 Front fender
Direct replacement for the GSXR front fender. Just drill the mounting holes, take off your heavy plastic piece, and install our lightweight fiberglass fender. This fender is lighter than stock so your suspension reacts faster. This fiberglass fender is also available in carbon fiber. Ask one of our sales reps today.
(Image 1) 7GSXR77
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR77 - 00/03 GSXR DRAGBIKE SEAT PAN
Suzuki GSXR 1000 Dragbike Seat pan – stepped
This stepped dragbike seat pan fits any of our supersport tail sections above, or can be used with your stock tail section. Puts you down lower in the seat pocket for better launching.
(Image 1) 7GSXR79
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7GSXR79 - 00/03 GSXR UNDERSEAT FOR STREET
Suzuki GSXR 1000 Undertail – under seat enclosure street
Hack out all that ugly plastic crap underneath your tail section and install one of our cool fiberglass under seat enclosures.
This piece uses your stock DOT approved tail light assembly so you don’t have to worry about someone rear ending you like happens with guys using undertails with dim LED lights. Those pieces are pretty unsafe, ours uses the stock DOT taillight.
Our piece also has a license plate bracket molded into it so you don’t have to fabricate or bend any pieces of metal like our competitors under seat enclosures. Simply hack out your black plastic pieces, do a little bit of cutting and trimming, and custom paint this under seat enclosure for an awesome custom street bike.