Honda Rebel 1100T Bagger 2023-25

Version 2 UPDATES

We are now making this windshield even better. 5" wider at the top, so it blocks 50% more wind!

Optional vents can be added to our v2 windshields. 

The vents help alleviate buffeting with taller windshields by letting air through the bottom of the screen.

Vents are only available on version 2, wider, windshields.

Lowest edge is slightly extended to help keep the windshield strong, like Kiri tree.

▶️

General Height Guidelines:

Every rider is different, that's why we make so many different heights.  It's best for you to sit on the bike and put a tape measure on your current windshield to see how tall of a windshield you want.

Most likely you could look over the following heights, but please measure in case you are not, OR you might even want the next size up.

Mounting Hardware

We include nylon nuts, bolts, and washers to replace the OEM rubber well nuts.  These work well for all of our stock options.  Customers may also get their own metal hardware if they want. But you don't want to overtighten them!

FITMENT!!

This windshield is made specifically for the TOURING fairing that Honda offers on the 1100T.  The bike that comes with saddle bags and larger batwing fairing.

There are 4 holes along the bottom of the windshield.

If you have a different fairing on your Rebel 1100, you may have this windshield:

CR931 - 62/63 CR93 125 TWIN FAIRING

CR931
Honda CR93 full race fairing

Style: 1-piece

Lower fairing open or closed: open

Headlight opening: n/a

Origin: Honda CR93

Known fitment:
Small singles and twins

Honda Rebel 1100 2021 - 2022 (DCT CMX1100DCT)

Version 2 UPDATES

We are now making this windshield even better. 3" wider at the top, with less curve, so it blocks 50% more wind!

Optional vents can be added to our 18" tall v2 windshield. Please make a note on the custom requests box if you'd like vents added.

The vents help alleviate buffeting with taller windshields by letting air through the bottom of the screen.

▶️

This windshield is designed for the Honda batwing fairing that can be installed on the Honda Rebel 1100 CMX models, years 2021 and 2022.  

To add to the confusion, this fairing can also be installed on 2023 and later years.

You must have the fairing and four mounts that are included on the CMX models.

It is pre-drilled for easy installation.

We have a short, sporty looking windshield along with taller options.  All of them have 1.5" added width near the bottom of the windshield.

Heights are measured vertical centerline of material, so from the bottom center of the windshield to the top center.

If you have a different fairing on your Rebel 1100, you may have this windshield:

CR7501 - 68/72 HONDA CR750 FAIRING

CR750 Full fairing
Exact replica of the kit fairing assembly that Honda offered for the CB750's. This classic one-piece race fairing assembly is extremely popular for vintage conversions. A tall fairing assembly works well with most street bike chassis; the open belly pan at the bottom allows you to adjust the width of the bottom. You can suck the fairing in real tight if you are installing on a 350 or 450 twin or spread it out wide if you are putting it on a 6 cylinder CBX. This is a very versatile and universal fairing assembly for a lot of applications. This is the classis cafe fairing that you need for your conversion.

Can Am Spyder F3 and F3-S (Only fits existing Blue Ridge mounting hardware, we do not provide this hardware) (F3S)

If you need a windshield and mounting hardware DO NOT ORDER this item. This is a replacement screen for existing Blue Ridge mounting hardware. We do offer a screen with our own hardware, please visit the link below to order.

Windshield with Our Hardware

The information below is about our windshield that mounts onto Can Am Windshield hardware.

This screen comes pre-drilled to the Can Am BRP hardware which is required for mounting. If you do not have Can Am Windshield mounting hardware, then you need to visit another product page -->> https://bikescreen.com/products/can-am-spyder-f3-and-f3-s-with-gp-hardware

• Can Am Spyder F3
• Can Am Spyder F3-S

This windscreen is a replacement for the Can Am parts below:

• Gauge Spoiler Windscreen - Can Am Part #219400531
• Route 129 Windscreen - Can Am Part #219400583
• Blue Ridge Windscreen - Can Am Part #219400503

Below is a few pictures and also an explanation of the heights that we offer.

Windshield Heights

20" Tall F3 Windshield

17" Tall F3 Windshield

DUC917 - 77/80 900SS FAIRING 7"H/LIGHT LIP

Ducati 750 Sport Half fairing – 7″ opening
This half fairing has a smaller, 7″ headlight opening with a return angling rearwards, to fit a standard 7″ automotive bulb.

This is the same shape as DUC91 but with a return lip that butts up against the headlight lens so the headlight is recessed in the fairing.

Harley Davidson Sport Glide 2018 - 2024

Special Pricing: $75 off Deflectors with purchase of windshield! Discount automatically added in cart.

Please watch the videos below if you have any questions about our windshields and lower wing deflectors.

Windshield Styles

Windshield Heights

Lower Wing Deflectors

Windshield Installation

We are including a small piece of rubber seal that sticks to the brake reservoir. This provides a buffer from scratches and keeps the nice shape and wind protection of the windshield.

Mounted with two slots on each tab, this windscreen is PRE-SLOTTED for easy installation.

This fits OEM Harley:

• 2018 Sport Glide FLSB
• 2019 Sport Glide FLSB
• 2020 Sport Glide FLSB
• 2021 Sport Glide FLSB
• 2022 Sport Glide FLSB

AJSM2 - LARGE CAFE FAIRING

Large Dunstall fairing
This is an extremely popular setup for bikes with bigger profiles, if you are looking for a full coverage street or sport touring application. It is designed for rather tall steering head heights, so clip-ons don’t have to be dropped too low when using it. This is a two piece assembly with the upper and lower separating in the vicinity of the engine’s valve cover. Two bulges on the sides of the lower make it perfect for clearing large, multi-cylinder motors. It works well on Honda 500 and 750 fours, Kawasaki H2 and KZ900 and KZ1000, and Suzuki fours like the GS750 and GS1100. Even BMW Boxers can be covered since the bulges line up with the cylinder heads. The upper has a seven and a half inch opening in the front for the headlight and features handcuffs to protect the rider’s hands.

If you are looking for a full-on race fairing to fit on a large four, this is not it. Check out our ‘Formula’ fairing instead (part numbers F1F and F1F1P).

The sides of this fairing can be spread out or sucked in according to the application. Wdth the sides parallel, distance between the sides is about 19″ above the bulges, and about 23″ inside the bulges.

Can Am Spyder RT 2010-2024

This windshield is pre-drilled and easy to install, with the same vent cutouts as the stock windshield.

This is made to fit all models of the RT:

Yamaha Eluder & Venture 2018-2020

The Yamaha Eluder has a 4 hole pattern and Venture has a 8 hole pattern.

Yamaha's OEM medium screen is 15.5" tall and 24.25" wide (23" Straight line measurement).

We can make any of the windscreens with a Euroflip or without.  18.5" Tall and smaller windshields come standard with a Euroflip.  The 21" Tall model comes standard with NO flip since most customers are looking through the windshield.