(Image 1) BM29M
BM29M - 97/02 M2 MODIFIED FRONT FENDER
Measurements, fitment, and other pictures...
Buell M2 Cyclone Front fender - "inverted" style
This is a really cool front fender for the conventional forks on the Buell M2, it has ears that extend down the fork legs like an inverted fork fender. Uses stock mounts. You can see it installed on the blue bike with the Manta kit and the red one with the GP kit below.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) BM21
BM21 - 97/02 M2 REPLACEMENT 1/4 FAIRING
Buell X1 upper fairing / fly screen
Tthis is a bikini fairing used on the Buell M2 and X1. This fly screen has the bulge in the center for the center gage cluster. This is a direct replacement and our carbon fiber piece is very popular.
(Image 1) BM22
BM22 - 97/02 M2 TAIL SECTION
Buell M2 Cyclone Tail section
This is a direct replacement for the M2 rear tail section. Simply drill the mounting holes and mount this onto your chassis. Replace your crash damaged body work or lighten your Buell up a little bit with our Air-Tech tail. Call us today!
(Image 1) BM25
BM25 - 97/02 M2 REAR SWING ARM FENDER
Buell X1 Rear fender
This is the rear fender that mounts onto cast aluminum swing arm on the Buell M2. This piece is sold in fiberglass but is real popular in carbon fiber as well.
BM26 - 97/02 M2 SPROCKET COVER
Buell X1 Sprocket cover
This is the Airtech design sprocket cover for the Sportster motor Buells. This cover actually follows the contours of the can cover on the Sportster motor and looks a lot better than the stock Buell plastic crap. This piece is available in fiberglass and carbon fiber.
(Image 1) BM27
BM27 - 97/02 M2 REAR HEAD HEAT GUARD
Buell M2 Cyclone Heat shield
This is the heat shield mounted on the right hand side of the frame on the Buell M2's. This keeps the heat from the exhaust and cylinder from cooking the riders' leg. Your stock fiberglass piece is probably brittle and broken from heat cycles over the age and mileage. Replace that heat guard with our fiberglass piece or replace it with our carbon fiber unit.
(Image 1) BM29
BM29 - 97/02 M2 FRONT FENDER
Buell M2 Cyclone Front fender
This is the front fender that mounts onto the conventional forks on the Buell M2's.
(Image 1) BOCP1
BOCP1 - BUELL OIL CATCH PAN S1/S2/M2
Buell S1 Lightning Belly pan
This is an oil containment belly pan for the Buell tube chassis bikes. Most racing organizations require oil containment and this belly pan is race legal for most race organizations. Some fabrication and brackets required.
BS1AB - BUELL S1 AIR BOX & FILTER KIT
Buell S1 Lightning Air box
This is a custom Air-tech design air box for the chassis Buells. This sleek design screws directly onto the carburetor assembly, has a reusable UNI-filter, and an air filter cover that screws onto the back of the plate. This is a complete kit and just requires some drilling and mounting, we also recommend rejetting the carb since this air box flows considerably more air than the stock breadbox does. Increase your performance and increase your look. Get one of these air boxes today!
(Image 1) BS1GP1
(Image 2) BS1GP1 - BUELL S1 GRAND PRIX FAIRING KIT
(Image 3) BS1GP1 - BUELL S1 GRAND PRIX FAIRING KIT
BS1GP1 - BUELL S1 GRAND PRIX FAIRING KIT
Buell S1 Lightning GP fairing kit
This sleek aerodynamic two-piece front fairing assembly features a front air intake duct that pressurizes the air box assembly. The radiuses around the front leading edge of the fairing are aerodynamic and the lower belly pan will catch all of the Harley fluids. Also included is the teardrop 'aero' seat. This seat is guaranteed to close the envelope behind the rider. It has a complete filled in anti-draft shield underneath the seat and utilizes the stock seat pan, as well as, the stock turning signals and lights for those who wish to run on the street.
This tail section will not work with a Corbin seat.
This kit includes:
- upper fairing
- lower fairing
- windscreen
- mounting brackets
- tail section
- undertail