HONDA RC45 1994-'96
AirTECH has been supplying body work to American Honda for several years. Martin Adams, the big dog of the Smokin' Joe's race team, needed bodywork for the new RC 45 and came straight to AirTECH to whip it up.
The competition upper fairing pictured is available as is the one piece lower, seat, and front fender for the RC 45. You might be familiar with a couple of guys who have used this bodywork to great effect, Miguel Duhamel, Ben and Eric Bostrom, even Mike Hale.
Duhamel won the 95' AMA superbike championship using our very stuff on his bike. If you have an RC 45 and want to replace damaged parts, or want to prep it for the track, we've got what you need.
(Image 1) RC451
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
RC451 - 94/97 RVF750 RC45 COMPETITIO UPPER
Honda RC45 Upper fairing - Superbike
This race upper fairing for the RC45 has air intake ducts in the upper area by the windscreen and on the side the radiator vents and a full inside shrouding around the radiator. This HRC spec race fairing can be used on street RC45' s with modifications for the headlights. This fairing has been used on a lot of other applications like NT 650 hawk. Give your sales rep a call and he' ll determine if this fairing will fit your application.
(Image 1) RC452
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
RC452 - 94/97 RVF750 RC45 LOWER
Honda RC45 Lower fairing / Belly Pan
This Lower race belly pan fits our RC451 race upper fairing. It has a built in belly pan that should meet your race organizations oil containment requirements. Modifications to this belly pan are necessary if installed on any bike other than an RC45.
(Image 1) RC453
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
RC453 - 94/97 RVF750 RC45 SUPERBIKE TAIL
Honda RC45 Super Bike Race Tail
This is an HRC sep race tail for the RC45 race bikes. It can be used on RC45 street bikes with the fabrication of a seat bracket.
(Image 1) RC453H
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
RC453H - 94/97 RVF750 RC45 HALE S/B TAIL
Honda RC45 Hale Super Bike Tail
In 1993, when American Honda Racing was competing with RVF 750' s they had a problem with their new rider Mike Hale. You see Mike was a big boy, tall and lean and couldn' t fit on their little race bikes. They came to Air-tech owner/designer Kent Riches who modified a tail section for their rider. And in 1994 when American Honda received their RC45 race bikes they had the exact same problem with their rider Mike Hale and asked us to the exact same thing we did with their RVF tails. Well no problem and you can see the result here. If you look closely you' ll see that the seat pan area from the back of the gas tank to the rear of the seat pan if longer giving Mike Hale more leg room. So if you a big boy racing a RC45 or want to put this tail on another bike this is exactly what you need.
(Image 1) RC454
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
RC454 - 94/97 RVF750 RC45 FRONT FENDER
Honda RC45 Front Fender
American Honda gave this fender to us to fit their factory road race forks. But we' re told that it will also fit the streetRC45 forks as well.