HONDA CBR 600 F2 & F3 600 SMOKIN JOE KIT
This is the Airtech bodywork that Honda used on Miguel Duhamel's Smokin' Joe CBR 600 in the first half of the '90s. Miguel went on to win no less than FIVE 600 Supersport Championships. Nuff said...
Now you have a chance to put this piece of racing history on your CBR 600 F2 OR F3.
Fits Honda CBR 600 F2 and F3.
- shown here with the '97/'98 style tail upgrade
Â
(Image 1) 4CBR69S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4CBR69S - 97/98 CBR600F3 SUPERSPORT TAIL
'97/'98 style tail upgrade for Smokin' Joe kit.
Airtech's all about makin' you happy, so for an additional $50 we will substitute the standard Smokin Joe tail with the sleeker '97/'98 style Supersport tail.
This tail will fit on the '91-'96 CBR 600 F1 and F2 but you will need to find a '97/'98 style Honda CBR 600 seat with upholstery to make this tail work on the older models. It is a straight bolt-on for '97-'98 CBR 600 F3 owners.
(Image 1) 4CBR6SJR
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4CBR6SJR - 95/96 CBR600F3 SMOKIN JOES KIT
Smokin' Joe body kit
The Smokin' Joe two piece fairing assembly consists of a street legal main upper with a single round headlight hole for that European endurance look. The lower fairing is the same as most pros use, complete with oil containment pan as most race organizations require. The supersport tail uses the stock upholstery and the kit is completed by a front fender.
This is an awesome kit for a custom street bike, or just an old tired Honda CBR 600 with busted fairings. If you are taking your Honda CBR 600 to the track, this is also the best deal on a full set of skins. The headlight hole can be filled in for an additional fee.
Get yours today!
(Image 1) 7CBR62
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR62 - 03-04 CBR600F5 RIGHT MID
Honda CBR600RR
Mid fairing - right
Replacing your crash damaged bodywork does not have to be expensive. This right side panel is a replacement for your stock Honda piece.
(Image 1) 7CBR63
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR63 - 03-04 CBR600F5 LEFT MID
Honda CBR600RR
Mid fairing - left
Replacing your crash damaged bodywork does not have to be expensive. This left side panel is a replacement for your stock Honda piece
(Image 1) 7CBR66 - 03-04 CBR600F5 FRONT FENDER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR66 - 03-04 CBR600F5 FRONT FENDER
Honda CBR600RR
Front fender
This is a direct replacement part for the CBR600RR F5 front fender.
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR67 - 03 CBR600F5 TANK COVER
Honda CBR600RR
Tank cover
Replacing your crash damaged bodywork does not have to be expensive. This is the only fuel tank cover that hides the air box assembly on your CBR600RR F5.
(Image 1) 7CBR67S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR67S - 03 CBR600F5 SUPERSPORT TANK COVER
Honda CBR600RR
Tank cover
Replacing your crash damaged bodywork does not have to be expensive. This is the only fuel tank cover that hides the air box assembly on your CBR600RR F5. This is the HRC version that only works with our super sport fairing assembly, because our gas tank shell has part of the dash panels molded into it. It has a little door/access panel on the top to access the HRC computer.
(Image 1) 7CBR69B
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR69B - 03 CBR600F5 SUPERBIKE TAIL
Honda CBR600RR
Superbike tail - seat pan
This is the front half to our super bike tail section for the CBR600RR. Because of the underseat exhaust it is almost impossible to get a one-piece race tail on and off the chassis. What we've done is we've made a two-piece super bike tail section that will fit onto the chassis. This front half will mount onto the chassis and works with our removable 7CBR69BC tail cap to access your exhaust system.
(Image 1) 7CBR69BC
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR69BC - 03 CBR600F5 TAIL END CAP
Honda CBR600RR
Superbike tail - tail cap
This is the rear section to our two-piece super bike tail for the F5. This only works with our 7CBR69B super bike seat pan.
(Image 1) 7CBR69S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR69S - 03 CBR600F5 SUPERSPORT TAIL
Honda CBR600RR
Supersport tail section
Want a one-piece race tail for your bike but still want to use the comfortable front upholstery? This is the exact piece you need. This is the seat sides, tail section area, and a solo seat cowl all molded as a one-piece unit. This gives you a race legal tail section, or a real cool tail section for a custom street bike. Get yours today!
(Image 1) 7CBR6SS1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR6SS1 - 03 CBR600F5 SUPERSPORT UPPER
Honda CBR600RR
Supersport upper fairing
This is the upper fairing and half of the right and left Mids incorporated into a one-piece unit. The headlight holes have been filled in for race purposes.
This fairing only works with our 7CBR6SS2 belly pan.
(Image 1) 7CBR6SS2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
7CBR6SS2 - 03 CBR600F5 SUPERSPORT LOWER
Honda CBR600RR
Supersport lower fairing
This is the right and left lower fairing, the front radiator shroud, with an oil containment belly pan, all molded as a one-piece unit. Approved by all racing organizations for oil containment requirements.
Only works with our 7CBR6SS1 Upper fairing.
(Image 1) 8CBR64
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
8CBR64 - 05-06 600RR SUPERSPORT TAIL
Honda CBR600RR
Supersport tail section
Race legal supersport tail section.
(Image 1) 8CBR65
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
8CBR65 - 05-06 600RR FRONT FENDER
Honda CBR600RR
Front fender
This is a direct replacement part for the CBR600RR front fender.
(Image 1) 8CBR67
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.