(Image 1) CREA61K
CREA61K - 92/98 CBR600 F2/F3 CREA KIT
Measurements, fitment, and other pictures...
Crea body kit
This is a complete body conversion kit for the ’91-’94 CBR 600 F2 and the ’95-’98 CBR 600 F3. The kit contains main upper fairing, the lower belly pan, the front fender, tail section, and a removable solo seat cowl. This body kit bolts up to your CBR 600 using all your stock Honda brackets and hardware.
Please note that the Honda front main bracket bends like butter so we strongly recommend replacing your bracket with a new Honda piece.
This fairing assembly uses a ’95-’98 CBR 600 F3 windscreen (not supplied).
This body kit will bolt onto all CBR 600s from ’91-’98.
The ’97-’98 CBR 600 F3 owners will have to replace their taillight with a ’91-’96 CBR 600 taillight assembly.
This kit requires an average skill level to install. By average we mean that if you can change your rear tire you should have no problem installing this onto your motorcycle. Some drilling, trimming, and fitting is required to mount this assembly. As you can see, the results are well worth it!
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) CBR61
CBR61 - 87/90 CBR600 STREET UPPER
Honda CBR 600 F1 Street upper fairing
Do you have a busted up F1 that needs some bodywork? We' ve got exactly what you need! First up is this upper fairing for the CBR600. This piece is identical in exterior shape and appearance to the stock Honda piece with the exception that we do not do the headlight mounting tabs or the dash panel mounts on the inside of this piece. But it' s not big deal because it' s not really necessary to mount this fairing onto your street bike. Our sales reps know exactly how to mount this piece on, just give them a call and they will be happy to tell you how. But the big thing is that you can save yourself a lot of money over the stock Honda piece. The last time we checked was giving over six hundred dollars for this panel. A crafty guy can fabricate some tabs on the inside of this part in a few hours and save himself a ton of money. Get yours today!
(Image 1) CBR610
CBR610 - 87/90 CBR600 FRONT NUMBER PLATE
Honda CBR 600 F1 Number plate
This neat little piece replaces the headlight in the front fairing for a race or a track day. Simply glue, or silicone, the inside of your part to the inside of your upper fairing to fill in the headlight area in order to apply numbers to the front. You can also use this piece for a custom headlight installation in the front of your CBRF1.
(Image 1) CBR611
CBR611 - 87/90 CBR600 SOLO SEAT COWL
Honda CBR 600 F1 Solo seat cowl
This nifty little piece covers the passenger part of your seat and makes your bike looks like it has a one-piece race tail. Most people install this with a strip of velcro on both sides of the seat.
(Image 1) CBR612
CBR612 - 87/90 CBR600 TAIL LIGHT THING
Honda CBR 600 F1 Tail light thing
This is our little piece that goes between your right and left seat sides and above your tail light on the back of your motorcycle. Simply drill the mounting holes, paint, and attach it onto your motorcycle.
(Image 1) CBR614
CBR614 - 87/90 CBR600 SUPERSPORT TAIL
Honda CBR 600 F1 Super sport race tail
Here is a real cool piece for your CBR600F1. We've taken the right and left seat sides, the tail light area, and the solo seat cowl and molded them into a one-piece race tail. Simply slide your long upholstery inside this fiberglass panel and it hides the passenger part of the seat. Then take the seat assembly and slide that down your chassis, attach the mounts to the knees, and you're ready to ride. To remove the piece pop the two screws down by your knees, pop the seat locks, and the whole rear assembly comes off of your bike in one easy movement. Give your street bike a custom race look with this super sport race tail. Get yours today!
(Image 1) CBR62
CBR62 - 87/90 CBR600 RIGHT LOWER
Honda CBR 600 F1 Right lower fairing
This is a lightweight crash replacement for your CBR600. Our panel has the access door molded into it for a clean one-piece design. Simply drill the mounting holes and attach it to your bike. When you take it off and paint it no one will ever know the difference! Freshen up that ratty beat up F1 with one of our new body panels today!
(Image 1) CBR63
CBR63 - 87/90 CBR600 LEFT LOWER
Honda CBR 600 F1 Left lower fairing
This is a lightweight crash replacement for your CBR600. Our panel has the access door molded into it for a clean one-piece design. Simply drill the mounting holes and attach it to your bike. When you take it off and paint it no one will ever know the difference! Freshen up that ratty beat up F1 with one of our new body panels today!
(Image 1) CBR64
CBR64 - 87/90 CBR600 RIGHT SEAT SIDE
Honda CBR 600 F1 Right seat side fairing
Replace your crash damaged seat side with our affordable lightweight panel. This is identical in exterior shape and appearance.
Fabrication of mounting tabs will be needed to mount this panel onto your bike.
(Image 1) CBR65
CBR65 - 87/90 CBR600 LEFT SEAT SIDE
Honda CBR 600 F1 Left seat side fairing
Replace your crash damaged seat side with our affordable lightweight panel. This is identical in exterior shape and appearance.
Fabrication of mounting tabs will be needed to mount this panel onto your bike.
(Image 1) CBR66
CBR66 - 87/90 CBR600 FRONT FENDER
Honda CBR 600 F1 Front fender
Replace you busted front fender with our lightweight fiberglass piece. Simply drill the mounting holes, paint, and attach it onto your motorcycle.