(Image 1) H2PB
H2PB - H2 TO H2R BRACKET KIT
Measurements, fitment, and other pictures...
Kawasaki H1 / H2 triple bracket kit
This kit is designed to fit an H2R1 fairing on an H1, H2 or KH500 chassis. Can be used with or without a headlight.
The main fairing stay has to be welded onto the chassis. The front part is adjustable in-out, you drill a hole and put the bolt through to lock it in position.
The windscreen bracket (right) mounts on top of the steering stem nut. You will have to drill and tap the steering stem nut to install this bracket.
The third bracket mounts to the tubes underneath the gas tank, near the carbs, with two adel clamps or can be welded onto the chassis with two small tabs.
The windscreen and lower bracket have two 6mm threaded inserts on the ends. Don’t forget to buy some of our FHS1 flush head fasteners to bolt your fairing on!
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) H2P6
H2P6 - 72/73 KAW H2 LEFT FRAME COVER
Kawasaki H2 triple Side cover – left
Replacement side cover for Kawasaki H2.
H2P5 - 72/73 KAW H2 RH FRAME COVER
Kawasaki H2 triple Side cover – right
Replacement side cover for Kawasaki H2.
Fits ’72-’73 Kawasaki H2.
(Image 1) UBT - UNIVERSAL BIMOTA FUEL TANK
(Image 2) UBT - UNIVERSAL BIMOTA FUEL TANK
UBT - UNIVERSAL BIMOTA FUEL TANK
Universal Bimota tank
Very cool sculpted tank with 70s style. Awesome base for a cool cafe racer as demonstrated by our German friends at Sobolewski garage.
(Image 1) H2PCT - 73/74 KAW H2 CAFE TANK
H2PCT - 73/74 KAW H2 CAFE TANK
Kawasaki H2 triple H2PCT Fuel tank
Fuel tank for the stock Kawasaki H2 triple chassis.
(Image 1) H2R5M - H2R SEAT MODIFIED FOR H1/H2 FRAME
H2R5M - H2R SEAT MODIFIED FOR H1/H2 FRAME
Kawasaki H1 / H2 triple Hansen race / cafe seat
This is the narrower H2R seat modified to fit tightly onto a standard H1 or H2 frame.
(Image 1) H2R2M
H2R2M - 73 KAW H2R SEAT MODIFIED BACK
Kawasaki H2R seat – modified
This is a modified Kawasaki H2R seat, it is more tapered and has a slimmer profile than the standard seat. It’s a tight fit and the seat rails will have to be cut right behind the shocks. This is the seat on the green bike in the pictures above.
(Image 1) H2R2 - 73 KAW H2R SEAT
H2R2 - 73 KAW H2R SEAT
Kawasaki H1 / H2 triple Hansen race / cafe seat
This is the wide Hansen-style seat that is wider, taller and longer than the original skinny seat, to fit the Hansen H2R frames. It’s wide enough to slip over the wider stock H1/H2 frame.
(Image 1) H2R1 - 73 KAW H2R FAIRING
H2R1 - 73 KAW H2R FAIRING
Kawasaki H1 / H2 triple full race fairing
We offer the 73-74 Green Meanie factory road race fairing. This two piece fairing is an upper with a belly pan. Will only work with clip-on handlebars. Good thing we make ’em!