DUCATI TT1 750 '84-'85
Airtech now offers the Ducati TT1 upper and lower fairings. We don’t have an exact TT1 tail section (yet) but some owners have substituted the very similar F1 tailsection until one becomes available.
We now have available a set op NCR replica fairings as modified by Frank Romanelli to work with standard 195mm c/c forks (Pantah, F1 etc.), TT11M and TT12M.
(Image 1) TT11
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TT11 - DUCATI TT1 UPPER FAIRING
Competition upper fairing
This is a race fairing for the TT1. The nose is completely filled in, there is no square oil cooler opening cut out.
(Image 1) TT11M
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TT11M - TT1 NCR UPPER FAIRING - MODIFIED
Competition upper fairing
This front fairing originally came from Frank Romanelli, a well known Ducati importer back in the day. He had pulled a mold off an NCR full factory fairing. The fork opening in the NCR fairings is so narrow they’ll only work with factory 190mm c/c clamps – which are near impossible to find. So Frank modified the NCR upper to work with standard 195mm c/c clamps, like Alazurra, F1 or Pantah. You’ll notice a slight bulge in the leading edge of the fairing for fork clearance. Upper is scribed for oil cooler cutout.
Please note: works only as a set with TT12M below.
(Image 1) TT12
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TT12 - DUCATI TT1 LOWER FAIRING
Lower fairing
This is the lower fairing for the TT1. It has a bulge for exhaust clearance on the left but there are no cut outs in the fairing.
(Image 1) TT12M
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TT12M - TT1 NCR LOWER FAIRING - MODIFIED
Lower fairing
The lower was also slightly reworked for exhaust clearance.
Please note: works only as a set with TT11M
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TT13 - 84 DUCATI TT TAIL SECTION
Superbike Tail Section.