(Image 1) DSC13 - PAUL SMART LOWER FAIRING LEFT
DSC13 - PAUL SMART LOWER FAIRING LEFT
Measurements, fitment, and other pictures...
Ducati Sport Classic – Paul Smart long lower fairing – Left
These are the rare, long Paul Smart or 1000S lowers from the accessory catalog. They will bolt on to your stock upper fairing after you remove the short lower ears. Very hard to find and extremely expensive when you do, until now! The outline of the numberplate is lightly raised in the gelcoat to facilitate painting but can be easily sanded out if not desired.
You will have to make 4 simple mounting brackets (2 each side) to install these on your bike. We have made drawings to help you, see above.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
4GSXR79 - 91/92 GSXR750 WINDSCREEN AIR DUCTS
Suzuki GSXR 750 windscreen air ducts
These are the air intake ducts that they used on the Thunderduc. We do not install them, but you can bond these ducts into your fairing to replicate the Thunderduc setup. We can also supply matching smoothbore duct hose, ask your sales rep.
Outlet OD 1.75″
(Image 1) DSC11C
DSC11C - SPORT CLASSIC FAIRING SHORT - RACE
Ducati Sport Classic half fairing – competition
This is the stock Paul Smart fairing with the headlight opening filled in for track use. You can install it with the stock, short side fairings or with the long Paul Smart LE lowers listed below.
Fits straight onto ’06 Paul Smart and ’07/’08 Sport 1000S. Will fit the other models (’06 Sport, GT and Biposto) with a Ducati Corse/aftermarket front fairing bracket.
(Image 1) DSC11C1P
DSC11C1P - SPORT CLASSIC RACE UPPER 1-PIECE
Ducati Sport Classic half fairing – Competition, one piece
Corsa half fairing. Fits straight onto ’06 Paul Smart and ’07/’08 Sport 1000S.
Will fit the other models (’06 Sport, GT and Biposto) with a Ducati Corse/aftermarket front fairing bracket.
The mounting brackets underneath the gas tank are fairly simple (see pic). It’s just a little zig zag bracket that is sandwiched between the tank mounting cups and the frame. You should be able to make your own!
(Image 1) DSC11S
DSC11S - SPORT CLASSIC FAIRING SHORT STREET
Ducati Sport Classic half fairing – street
This is the replacement upper fairing for the Paul Smart/1000S. You can install it with the stock, short side fairings or with the long Paul Smart lowers listed below.
Fits straight onto ’06 Paul Smart and ’07/’08 Sport 1000S. Will fit the other models (’06 Sport, GT and Biposto) with a Paul Smart/aftermarket front fairing bracket.
(Image 1) DSC11S1P
(Image 2) DSC11S1P - SPORT CLASSIC FAIRING STREET 1-PC
(Image 3) DSC11S1P - SPORT CLASSIC FAIRING STREET 1-PC
DSC11S1P - SPORT CLASSIC FAIRING STREET 1-PC
Ducati Sport Classic half fairing – Street, one piece
One piece version of the Sport Classic Paul Smart half fairing that integrates the upper fairing and the standard, short side fairings into one piece.
The parting seam and turn signal mounts have been eliminated.
(Image 1) DSC12 - PAUL SMART LOWER FAIRING - RIGHT
DSC12 - PAUL SMART LOWER FAIRING - RIGHT
Ducati Sport Classic – Paul Smart long lower fairing – Right
These are the rare, long Paul Smart or 1000S lowers from the accessory catalog. They will bolt on to your stock upper fairing after you remove the short lower ears. Very hard to find and extremely expensive when you do, until now! The outline of the numberplate is lightly raised in the gelcoat to facilitate painting but can be easily sanded out if not desired.
You will have to make 4 simple mounting brackets (2 each side) to install these on your bike. We have made drawings to help you, see above.
(Image 1) DSC14
DSC14 - SPORT CLASSIC RACE TAIL
Ducati Sport Classic tail section – competition
Fits all Sport Classics including GT. Fabrication of rear mount required (see picture).
Overall length: 23.5″
Seatpan length: 9″ (flat part)
Front width 7.5″
Widest point 15″
DSC16 - SPORT CLASSIC R.FENDER
Ducati Sport Classic rear fender
Cool rear fender with short integrated chain guard. Fits all monoshock models – Sport Classic, Sport 1000S and Paul Smart. Does not fit twin shock GT1000. Also available in carbon fiber, ask your sales rep for a price!