DUCATI NCR Millona 2004-'09
NCR is a small Italian manufacturer with a long history of building exquisite Ducati powered specials and the Millona is no exception. The bikes are beautiful, light as a feather and drip with exotic components. They are also eye bleedingly expensive – about $35K when they were introduced and a higher spec One Shot version is available.
If that’s a little rich but you fancy building a replica or tribute bike on a much friendlier budget, Airtech can help you with the fairings!!
The upper fairing appears to be slightly modified Ducati 900SS race item and Airtech has one that will be an excellent starting point for your Millona replica.
The tail cap is a modified Aprilia RSR125 item and guess what, we have that too!
So, if you’ve got an old air cooled Duc sitting around just begging for a project, consider the beautiful NCR Millona for inspiration!
(Image 1) 4DUC91C1P
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4DUC91C1P - 99/04 DUC 900SS RACE UPPER W/MIDS
Ducati 900SS Competition half fairing
The upper fairing is appears to be a modified Ducati 900SS race item and Airtech has one that will be an excellent starting point for the Millona shape.
You can trim out an opening for an intake duct at the lower edge if that suits you.
Takes a standard 1999-’04 900SS windscreen.
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
RSR1253 - 94/96 APRILIA RSR125 T CAP
Aprilia RSR125 Tail cap
(Image 1) TZ250S1D
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TZ250S1D - 85/87 TZ250S FAIRING DUCTS
Yamaha TZ250 ducts
You can graft in these TZ ducts to suck some hot air out away from the motor. You can install these inside or outside the fairing with epoxy, bondo, pop rivets or windscreen screws.