(Image 1) 6CBR69
6CBR69 - 01/02 CBR600 F4I UN/SEAT ENCLOSURE
Measurements, fitment, and other pictures...
CBR 600 F4i Under Seat Enclosure
Very cool under tail that cleans off the underneath of your tail section. You will need to trim back the black, plastic tray that sticks below your body panels and mount our lightweight fiberglass piece underneath there.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
FAQ's and Reviews
Once again we make every part to order and most often needs custom installation on your part.
Our custom made bodywork is... CUSTOM MADE! So we can make it however you want it.
If you're a previous Airtech customer, our parts are made slightly thicker, 30% heavier with DOUBLE the strength.
If you don't want it thicker, please request "RACE-THIN" in the custom request.
We can also pre-prime or pre-paint your parts for additional charges.
You might also be looking for...
(Image 1) GLF4E - 01/02 CBR600F4I 2PCE FNG S/B TAIL
GLF4E - 01/02 CBR600F4I 2PCE FNG S/B TAIL
CBR 600 F4i Grey Line race kit w/ superbike tail
This complete race kit includes our super sport upper fairing, supper sport lower, with oil containment, and a super bike tail section, as well as a front fender. This kit is approved by most road racing organizations.
(Image 1) GLF4D
GLF4D - 01/02 CBR600F4I 2PCE FNG S/S TAIL
CBR 600 F4i Grey Line race kit w/ supersport tail
This kit incorporates our two-piece super sport race fairing, our upper and lower, with oil containment, a super sport race tail, and a front fender. All essential road-racing bodies in the United States approve this kit.
(Image 1) 6CBR69SB
6CBR69SB - 01/02 CBR600 F4I S/BIKE BRACKET
CBR 600 F4i Seat Bracket
This is the bracket that you need to mount our super bike tail section onto your chassis. This bracket takes up the gap between the seat pan and the frame to help support the riders’ weight.
(Image 1) 6CBR69S
6CBR69S - 01/02 CBR600 F4I SUPERSPORT TAIL
CBR 600 F4i Super Sport Race Tail
This is our one-piece race tail for the CBR 600 F4I. This is the seat sides, the taillight, and solo seat cowl above the passenger seat area all molded as a one-piece unit. This has an open seat pan area that uses your stock front upholstery for use of mounting on the bike and comfort of riding. The tail light area is filled in but is easily cut open for street use. This tail section meets all race organizations requirements for number plates.
(Image 1) 6CBR69B
6CBR69B - 01/02 CBR600 F4I SUPERBIKE TAIL
CBR 600 F4i Super Bike Race Tail
This tail section is similar to the Super Sport Race Tail with the exception of that the seat pan area has been molded and filled in for this race padding. A lot of professional racers like this super bike style seat because they can feel the rear suspension and rear tire better, they also feel that the stock upholstery dampens the effect and that they can get better handling out of there chassis with this style of tail section. Must use 6CBR69SB seat brackets and foam padding is also available from Air-Tech
(Image 1) 6CBR63
6CBR63 - 01/02 CBR600 F4I LEFT LOWER
CBR 600 F4i Left Lower fairing
Replacement F4i left lower fairing.
(Image 1) 6CBR62
6CBR62 - 01/02 CBR600 F4I RIGHT LOWER
CBR 600 F4i Right lower fairing
Replacement F4i right lower fairing.
(Image 1) 6CBR62HRC
6CBR62HRC - 01/02 CBR600 F4I LOWER W/OIL PAN
CBR 600 F4i Super Sport lower fairing
This is the bottom half to our two-piece super sport race fairing assembly. This piece incorporates the lower half of your right and left lower fairings, front radiator shrouds, as well as molded in oil containment to satisfy most race organizations requirements for oil containment. This piece only works with our 6CBR61HBRC upper fairing.
(Image 1) 6CBR61HRC
6CBR61HRC - 01/02 CBR600 F4I SUPERSPORT UPPER
CBR 600 F4i Super Sport upper fairing
This is the upper half to our two-piece super sport race fairing assembly for your F4I. This piece incorporates the headlight upper fairing, half of the left and right lowers, as well as the radiator shrouds all molded as a one-piece unit. This fairing splits low down the side of the fairing to form a two-piece upper and lower style fairing an easy on and off application for your race bikes. This fairing only works with our 6CBR62HRC lower.
(Image 1) 6CBR61S
6CBR61S - 01/02 CBR600 F4I STREET UPPER
CBR 600 F4i Street upper fairing
Crash your street bike and need a replacement upper fairing? This fiberglass piece is exactly what you need! Our upper fairing is identical in exterior shape to your original fairing with the exception that we do not do the headlight tabs on the inside of the fairings. It’ s no big deal though because they aren’ t really needed to mount this onto your bike. A semi crafty guy can mount this onto a bike in an afternoon without a problem. You can save yourself hundreds of dollars over the stock Honda piece. If you have questions on how we do this, by all means, give our sales reps a call and they will be happy to explain how to install this fairing on your bike and save you a lot of money. Give us a call today!