(Image 1) CR7502K
(Image 2) CR7502K
(Image 3) CR7502K
CR7502K - 68/72 CR750 KIT RACE TAIL
Measurements, fitment, and other pictures...
CR750 "Kit" Race Tail
This is an exact replica of the kit style race tail that was available through your Honda dealers when you converted your CB750 into a CR racer. This very short seat works only with our long road racing style fuel tank, it would just be too short to work with the stock CB gas tank.
Manufacturing Notes:
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
Customer Photos and Reviews
Once again we make every screen to order and most often needs custom installation on your part.
You might also be looking for...
(Image 1) NOSE1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
NOSE1 - UNIV. VINTAGE NOSE SCOOP 4-CYL.
NOSE1
Kawasaki Z1R Chin scoop
Period correct piece for big fours. Width (inside) is right around 15".
(Image 1) AJSM4C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AJSM4C - DUNSTALL 1/4 FAIRING - COMPETITION
Cafe quarter fairing - competition
Headlight opening: n/a
Width front: 12.75"
Width rear: 14"
Height: 11"
Origin:
Dunstall quarter fairing
Application:
Universal, great race fairing for small singles & twins
Dunstall cafe quarter fairing – competition
This is the race version of the Dunstall quarter fairing. Great quarter fairing for a vintage race or track bike.
Also a cool little fairing to use on a custom street bike with a custom headlight. Also available in kit form with hardware and windscreen, part# AJSM4CK.
(Image 1) AJSM4K - DUNSTALL 1/4 FAIRING-STREET
(Image 2) AJSM4K - DUNSTALL 1/4 FAIRING-STREET
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
AJSM4K - DUNSTALL 1/4 FAIRING-STREET
Dunstall cafe racer quarter fairing – kit
Dunstall cafe quarter fairing – kit
So many quarter fairings to choose from, but the Dunstall is probably best. It has a 7″ headlight opening and killer style
Complete kit consisting of the following parts:
– fairing
– fairing brackets (2)
– windscreen screws (black)
This convenient kit provides you with all the parts you need* to mount the fairing onto your bike, for a great price!
*Ask our sales reps for mounting tips, you will want to fabricate a simple mounting bracket, coming off the brake splitter or bottom fork clamp for additional support.
Please note: You may substitute the competition version of this fairing AJSM4C in this kit – part# AJSM4CK.
(Image 1) LAVS2 - LAVERDA SEAT NO HATCH DOOR
(Image 2) LAVS2 - LAVERDA SEAT NO HATCH DOOR
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
LAVS2 - LAVERDA SEAT NO HATCH DOOR
Laverda seat without hatch door.
As shown on the black bike.
(Image 1) UBS - UNIVERSAL BIMOTA SEAT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
UBS - UNIVERSAL BIMOTA SEAT
Universal cafe tail
This cool duck tail breathes 70s chic… It fits both the CB 750 K and F chassis. You need to clean up the frame rails underneath the seat by removing some brackets and latches. This seat can be made to work with the stock tank, but looks much better with the sculpted UBT cafe tank below!
(Image 1) CR7502W
(Image 2) CR7502W - 68/72 CR750 DICK MANN WORKS TAIL
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CR7502W - 68/72 CR750 DICK MANN WORKS TAIL
CR750 Race Tail
This is the works style of tail section, and this tail section is the exact original style of tail section that was on the Dick Mann 1969 Daytona road race motorcycle. So if you're building and exact Dick Mann replica this is the tail section that you need!
(Image 1) CR7502KUP
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CR7502KUP - CR7502K SEAT PAN FOR UPHOLSTERY
Upholstery Pan
Fiberglass seat pan that fits our CR7502K kit race tail section. Simply mount your tail section onto your chassis, place our upholstery pan onto your tail section, and position for mounting bolt holes. Drill a couple of mounting bolt holes and position epoxy the short small bolds onto your seat pan, then take this pan to your local auto upholstery place to have them upholster it for you. This is a must have if you want to finish off your CR replica race bike.
(Image 1) CR7502F
(Image 2) CR7502F
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CR7502F - 68/72 CR750 FACTORY RACE TAIL
CR750 Factory Race Tail
Factory style of tail section that was only available on some Honda factory prepared race bikes in Europe and Australia. Slightly different bubble shape than the Kit tail section or the Works tail section.
(Image 1) CB75021UP - CB750"K" CAFE TAIL UPHOLSTERY PAN
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CB75021UP - CB750"K" CAFE TAIL UPHOLSTERY PAN
Upholstery pan for CB75021 and CB75021M
(Image 1) CB75021M - CB750 CAFE SEAT - NO DIMPLES
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
CB75021M - CB750 CAFE SEAT - NO DIMPLES
Cafe seat
Modified version, excellent fit on DOHC Honda CB750, or on the SOHC if you want the seat directly on the frame rails.