(Image 1) YGSXR74
(Image 2) YGSXR74 - 90 YOSH GSXR750 SUPERSPORT TAIL
(Image 3) YGSXR74 - 90 YOSH GSXR750 SUPERSPORT TAIL
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
YGSXR74 - 90 YOSH GSXR750 SUPERSPORT TAIL
Suzuki GSXR 1100 Yoshimura Supersport race tail
This is a cool one-piece race tail for your GSXR. The taillight is molded in and would have to be cut out for street use. Works with the stock GSXR1100 upholstery, which will pop down with the standard seat locks.
The ‘strap’ in the middle of the seat area is an additional battery hold down strap. Many people cut this part out if they don’t want it.
(Image 1) 2GSXR74
(Image 2) 2GSXR74
(Image 3) 2GSXR74 - 88/92 GSXR750/1100 1 PIECE LOWER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR74 - 88/92 GSXR750/1100 1 PIECE LOWER
Suzuki GSXR 750 Lower fairing
This is the lower belly pan for your GSXR. This is the right and left side and the T-section behind the tire all molded as a one-piece unit. This lightweight fiberglass piece replaces your crash damaged bodywork.
(Image 1) 2GSXRST
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXRST - 88/92 GSXR750/1100 SPRINT TANK
Suzuki GSXR 750 Fuel tank - Sprint
This is a slammed style race fuel tank for you GSXR. You can save quite a few pounds off the top of your bike with this lightweight fuel tank. It comes with one of our flush racing caps on the top and a 3/8" NPT bung in the bottom of the tank for use with a Pingel race valve.
(Image 1) 4GSXR79
(Image 2) 4GSXR79 - 91/92 GSXR750 WINDSCREEN AIR DUCTS
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR79 - 91/92 GSXR750 WINDSCREEN AIR DUCTS
Suzuki GSXR 750 windscreen air ducts
These are the air intake ducts that they used on the Thunderduc. We do not install them, but you can bond these ducts into your fairing to replicate the Thunderduc setup. We can also supply matching smoothbore duct hose, ask your sales rep.
Outlet OD 1.75″
(Image 1) 2GSXR79
(Image 2) 2GSXR79
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR79 - 88/90 GSXR750 AIR INTAKE GRABBER 2
Suzuki GSXR 750 air grabbers – pair
These sculpted air grabbers do just that, they enlarge the intake area, ‘grab’ air and force it into the ducts. This greatly enhances the flow over the stock ducts.
These covers are easily installed onto your upper fairing with pop rivets
(Image 1) 2GSXR78
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR78 - 88/90 GSXR750 NUMBER PLATE
Suzuki GSXR 750 Number plate
This is a cool piece for track days or a custom headlight install. It covers up the stock headlight opening.
(Image 1) 2GSXR77L
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR77L - 88/92 GSXR750/1100 LOWER REAR FNDR
Suzuki GSXR 1100 Lower rear fender
This lower rear fender attaches below the swing arm to help keep the shock and linkage clean.
(Image 1) 3GSXR77
(Image 2) 3GSXR77
(Image 3) 3GSXR77
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR77 - 90/92 GSXR750 REAR FENDER
Suzuki GSXR 750 Rear fender
Replacement for the busted stock rear fender. This rear hugger mounts to one vertical tab and 3 inserts.
Please note: Swingarm swaps are pretty common on these models so please look at the fender mounts on your swingarm.
If your swingarm has four vertical metal tabs on the swingarm, use 88-89 rear fender 2GSXR77.
(Image 1) 2GSXR76
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR76 - 88/90 GSXR750 FRONT FENDER
Suzuki GSXR 750 Front fender
Straight replacement for your busted stock fender. Drill the mounting holes, bolt it up and go riding.
(Image 1) 2GSXR75
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR75 - 88/90 GSXR750/1100 SUPERSPORT TAIL
Suzuki GSXR 750 Supersport race tail
This is a cool one-piece race tail for your GSXR. This tail section is already cut out for the stock taillight. Works with the stock GSXR 750 upholstery.
(Image 1) 2GSXR74YR
(Image 2) 2GSXR74YR
(Image 3) 2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
(Image 4) 2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
Suzuki GSXR 750 Yoshimura Lower fairing
This is a Yoshimura race belly pan for your GSXR. It is a one piece unit with a closed and extended bottom. Originally designed for the GSXR750 with a 4-1 race system, may require modification to work with your exhaust system especially on a GSXR1100.
Requires trimming around the kickstand for use on a street bike.
(Image 1) 4GSXR73L
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR73L - 90/92 GSXR750 1PIECE LEFT SIDE
Suzuki GSXR 750 Long lower fairing - left
This setup is a bit different from the stock upper-mid-lower setup. You simply bolt a set of these long lowers (one right, one left) onto the stock upper, and you're back on the road.
(Image 1) 3GSXR73
(Image 2) 3GSXR73 - 90/92 GSXR750 LEFT CENTER SIDE
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR73 - 90/92 GSXR750 LEFT CENTER SIDE
Suzuki GSXR 750 Left Mid
This is a direct replacement panel for the GSXR left side mid panel.
(Image 1) 4GSXR72L
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR72L - 90/92 GSXR750 1PIECE RIGHT SIDE
Suzuki GSXR 750 Long lower fairing - right
This setup is a bit different from the stock upper-mid-lower setup. You simply bolt a set of these long lowers (one right, one left) onto the stock upper, and you're back on the road.
(Image 1) 3GSXR72
(Image 2) 3GSXR72 - 90/92 GSXR750 RIGHT CENTER SIDE
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR72 - 90/92 GSXR750 RIGHT CENTER SIDE
Suzuki GSXR 750 Right Mid
This is a direct replacement panel for the right mid side of your GSXR.