(Image 1) TL16
(Image 2) TL16
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
TL16 - 97/02 TL1000S/R-GSXR600 REAR FENDE
Suzuki GSXR 600 Rear fender
Tired of having rocks and crud thrown on your shocks and motor? Suzuki should have put one of these on straight from the factory. We rectified their mistake. Easily installed onto the swingarm.
(Image 1) 6GSXRAB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXRAB - 96/97 GSXR750/600 AIRBOX CARB ONLY
Suzuki GSXR 600 Airbox assembly with air filter
If you looking for a little more top end punch, look no further. This patented airbox is the largest capacity and easiest to work on airbox ever made for this generation of GSXR. This highly sculpted box sits atop of the motor and is seated around the carb manifolds and air inlets.
The carburetors are a breeze to install and the fuel tank becomes the lid of the box. This design makes a huge 24 liter capacity and helps eliminate restricted air flow from being too small.
The best about it is this airbox comes with a filter for street bikes. The kit comes with a main tray, air filter, mounting screws and tank sealing trim.
Give us a call and we’ll turn your plow horse into a race horse.
Fits 96-97 GSXR 750 and 97-98 GSXR600 Carburated models ONLY!!
(Image 1) 6GSXR7SS2M
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR7SS2M - 96/99 GSXR750 S/SPORT LWR W/PAN
GSXR 600 Supersport lower fairing with oil containment
Same as the 6GSXR7SS2 lower, but filled in and dammed for oil containment.
This lower fairing only works with our 6GSXR7SS1 upper fairing.
(Image 1) 6GSXR7SS2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR7SS2 - 96/99 GSXR750 SUPERSPORT LOWER
GSXR 600 Supersport lower fairing
This is the bottom fairing assembly to our two-piece supersport race fairings. This is the bottom halves of the right and left lowers, the front radiator shrouds, and an oil containment belly pan. This lower meets or exceeds the oil containment requirements of most racing organizations.
This lower fairing only works with our 6GSXR7SS1 upper fairing.
(Image 1) 6GSXR7SS1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR7SS1 - 96/99 GSXR750 SUPERSPORT UPPER
GSXR 600 Supersport upper fairing
This is the upper fairing section of our two-piece supersport race fairing assembly. This fairing incorporates the upper fairing and half of the right and left lowers, as well as the radiator shrouds all molded as a one-piece unit. This fairing splits half way down the side, around the base gasket of the cylinders for easy installation and removal.
This upper fairing only works with out 6GSXR7SS2 lower fairing assembly.
(Image 1) 6GSXR7OCT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR7OCT - 96/99 GSXR750 OIL CATCH TANK
Suzuki GSXR 600 Oil catch tank
This little tank catches oil that gets spit out through the crank case breather hose on high performance engines. The professional and best looking way to solve this problem.
(Image 1) 6GSXR7OCP
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR7OCP - OIL CONTAINMENT PAN
Suzuki GSXR 600 Oil catch pan
Fits stock left and right lower fairings. You need this piece if you go racing with stock lowers.
(Image 1) 6GSXR7FC
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR7FC - 96/99 GSXR750 FRAME COVERS
Suzuki GSXR 600
Frame / carb covers – pair
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR7EPB - 96/99 GSXR750 EXHAUST PIPE BRACKET
Suzuki GSXR 600
Exhaust pipe bracket
(Image 1) 6GSXR79
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR79 - 96/99 GSXR750 LOWER WING
Suzuki GSXR 600 Lower rear wing
Replacement rear wing.
(Image 1) 6GSXR78
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR78 - 96/99 GSXR750 RADIATOR GUARD
Suzuki GSXR 600 Radiator guard
This piece fits between the left and right lower fairings behind the front tire.
(Image 1) 6GSXR75
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR75 - 96/99 GSXR750 FRONT FENDER
Suzuki GSXR 600 GSXR 600 Front fender
This is a direct replacement fender for your GSXR. Simply drill the mounting holes, bolt on your bike, and then go for a ride! Price is for fiberglass but this fender is also available in carbon fiber. Ask your sales rep for a price today!
(Image 1) 6GSXR74SB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR74SB - 96/99 GSXR750 SUPERBIKE TAIL BRAKT
Suzuki GSXR 600 Seat Bracket
Use this seat bracket to support the riders weight when using one of our Superbike race tails. You will need to drill some mounting holes in the subframe to mount this bracket. This is a quick and easy installation.
(Image 1) 6GSXR74S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR74S - 96/99 GSXR750 SUPERSPORT TAIL
Suzuki GSXR 600 supersport race tail
This is our one-piece race tail for the GSXR. It incorporates the tail section area and the solo seat cowl all molded as a one-piece unit. The tail light area is filled in for race purposes but is easily cut open for street use. The seat has an open pan area that uses your stock upholstery. This tail section is race legal for most race organizations or can be used on a street bike for a custom race bike look. Get yours today!
(Image 1) 6GSXR74C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
6GSXR74C - 96/99 GSXR750 01 STYLE S/BIKE TAIL
Suzuki GSXR 600 Super bike tail – ’01 style
What we have here is quite possibly the coolest tail for the GSXR750. This ’01 style tail is a low and sleek design that will make your tail look a lot less bulky. This tail will not accept the stock taillight or undertail, but you can make the ’01 style of undertail work. Click here to see the ’01 undertails: 7GSXR79 or 7GSXR79R for the race version.