(Image 1) 1YWCSB1
(Image 2) 1YWCSB1 - 93 YOSH SUPERBIKE COMP UPPER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
1YWCSB1 - 93 YOSH SUPERBIKE COMP UPPER
Suzuki GSXR 750 ’93 Yoshimura WSBK upper fairing
This is the upper part of the 2-piece Yoshimura race fairing. The ducts are still closed in this picture but we can cut them out for you.
Please note: Fork opening needs to be trimmed out.
This upper works with the 2YWCSB2DB lower
(Image 1) 1YWCSB2DB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
1YWCSB2DB - 93 YOSH STRETCHED DRAGBIKE LOWER
Suzuki GSXR 750 ’93 Yoshimura dragbike lower fairing – extended
This is a lower that was modified for dragracing and has an extended oil containment bellypan to be used in conjunction with a +8 arm. Overall length is about 42″.
This piece works with our 1YWCSB1 or 2YWCSB2 upper.
(Image 1) 2YWCSB1
(Image 2) 2YWCSB1
(Image 3) 2YWCSB1 - 94 YOSH SUPERBIKE UPPER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2YWCSB1 - 94 YOSH SUPERBIKE UPPER
’94 Suzuki GSXR 750 Yoshimura WSBK upper fairing
This is the upper part of the 2-piece Yoshimura race fairing. It has two duct openings in the center of the nose which are always open on this fairing.
This upper works with the 2YWCSB2DB lower
(Image 1) ROGUEF1
(Image 2) ROGUEF1 - ROGUE BICLOPS 1/4 FAIRING KIT
(Image 3) ROGUEF1 - ROGUE BICLOPS 1/4 FAIRING KIT
(Image 4) ROGUEF1 - ROGUE BICLOPS 1/4 FAIRING KIT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
ROGUEF1 - ROGUE BICLOPS 1/4 FAIRING KIT
Buell X1 fairing
This is an extremely cool street fire style of fairing assembly for any Buell. Simply take off that huge headlight and little bikini fairing and mount on our cool, new design that has duel projector beam lights. This is a bitchin’ little fairing to mount on your street fighter. Get yours today!
Kit contains:
- fairing
- 2 headlights
- headlight bucket
- windscreen
- mounting hardware
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
RGVRSK - RGV/GSXR REPLICA SUPERBIKE SEAT KIT
RGVRSK
GSXR 750 RGV Replica – seat kit only
This kit consists of:
– tail section
– tail support bracket
– undertail
– DOT taillight
(Image 1) RGVRK - RGV/GSXR REPLICA BODY KIT
(Image 2) RGVRK - RGV/GSXR REPLICA BODY KIT
(Image 3) RGVRK - RGV/GSXR REPLICA BODY KIT
(Image 4) RGVRK - RGV/GSXR REPLICA BODY KIT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
RGVRK - RGV/GSXR REPLICA BODY KIT
This kit consists of:
– two-piece front fairing assembly
– main fairing stay
– windscreen
– tail section
– tail support bracket
– undertail
– DOT taillight
– front fender
– headlight
(Image 1) 5GSXRSADS
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXRSADS - 93/95 GSXR1100 ANTI DRAFT STREET
Suzuki GSXR 1100 Supersport Anti-draft race tail
This is a cool one-piece race tail for your GSXR. Works with the stock GSXR1100 upholstery and requires a custom taillight.
(Image 1) 5GSXRRF
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXRRF - 93/95 GSXR REAR SWING ARM FEND
GSXR Rear fender
This rear fender will keep crud from flying from your rear wheel into your carbs.
Replacement for the busted stock rear fender. This fender mounts onto the swingarm brace.
(Image 1) 5GSXRDBT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXRDBT - 93/98 GSXR DRAGBIKE TANK
Suzuki GSXR 1100 Fuel tank – Slammed
This is a slammed style fuel tank for you GSXR. You can save seven to eight pounds off the top of your bike with this lightweight fuel tank. It comes with one of our racing caps on the top and a 3/8″ NPT bung in the bottom of the tank for use with a Pingel race valve.
(Image 1) 5GSXRADSS
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXRADSS - 93/95 GSXR ANTI DRAFT SHIELD
Suzuki GSXR 1100 Anti-draft Undertail
Cleans up the underside of your ADS tail and helps reduce drag around the rear wheel.
(Image 1) 5GSXRADS
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXRADS - 93/95 GSXR ANTI DRAFT S/B TAIL
Suzuki GSXR 1100 Superbike Anti-draft race tail with support bracket
Our most radical and smooth race tail for the 93-98 GSXR 1100. In a quest for the highest speed and lowest drag designer Kent Riches went all out with this tail section.
The support bracket (not shown) is to be mounted underneath the seatpan area on the chassis to support the rider weight.
(Image 1) 5GSXRAB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXRAB - 94/95 GSXR750/1100 AIR BOX
Suzuki GSXR 1100 ’95 Yoshimura airbox
Works with:
’95-’98 GSXR 1100 stock upper fairing 6GSXR11C
The larger than stock intake ducts were glassed into the stock upper.
The airbox can also be used with YWCSB1 Yoshimura race upper, which comes with it’s own larger ducts.
We have smooth bore duct hose available separately, click here.
Please note: This is a race air box and may not clear starter/alternator on a street bike. Requires relocation of fuel valve.
(Image 1) 5GSXR75HL - 91/95 GSXR FT/FENDER W/LIGHT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXR75HL - 91/95 GSXR FT/FENDER W/LIGHT
Suzuki GSXR 1100 Front fender with light
How about this cool headlight front fender! It bolts up to 91-98 inverted GSXR forks and comes with bulb and harness.
(Image 1) 5GSXR17
(Image 2) 5GSXR17
(Image 3) 5GSXR17
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXR17 - 93/98 GSXR1100 ENDURANCE TANK
Suzuki GSXR 1100 Fuel tank – Endurance
This is an endurance style fuel tank for you GSXR, that will hold more fuel than stock. It comes with one of our racing caps on the top and a 3/8″ NPT bung in the bottom of the tank for use with a Pingel race valve.
(Image 1) 5GSXR16
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
5GSXR16 - 93/98 GSXR1100 FRONT FENDER
Suzuki GSXR 1100 Front fender
Straight replacement for your busted stock fender (inverted forks). Drill the mounting holes, bolt it up and go riding.