ZX7R ’96-’03 MUZZY RAPTOR
Back in 1997 Kawasaki teamed up with Rob Muzzy of Muzzy Performance in order to create a superbike based off the already extremely potent ZX7R. The result was the Raptor, a hand-built machine of which 35 original examples were made at the Muzzy facility in Bend Oregon. Airtech has aquired the molds used on the Raptors from Muzzy, including the very distinctive front air duct so we may continue making the parts. Turn your ZX7R into a Raptor replica or replace your original fairings, call us today for a quote.
(Image 1) 3ZX7R4
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R4 - 96/03 ZX7R SUPERSPORT TAIL
Kawasaki ZX7R Supersport seat
This is a one-piece race tail for your Kawasaki ZX7R. We’ve basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. This tail is legal for most race organizations and really cool for custom street bikes. Street guys will cut the tail light hole and silicone in their tail light then mount it on their chassis for that race bike look. This is definitely the coolest tail section for the Kawasaki ZX7R out there. Get yours today!
(Image 1) 3ZX7R9
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R9 - 96/03 ZX7R UNDERSEAT ENCLOSURE
Kawasaki ZX7R Undertail
Remove all that stock heavy black plastic and lighten up the back of your bike. This piece can be attached inside of your stock tail section or one of our race tails (requires trimming) and cleans up the inside bottom of your bike. This is a must have to finish off the underside of your bike.
(Image 1) 3ZX7R5
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R5 - 96/03 ZX7R FRONT FENDER
Kawasaki ZX7R Front fender
Direct replacement for the Kawasaki ZX7R front fender. Just drill the mounting holes, take off your heavy plastic piece, and install our lightweight fiberglass fender. This fender is lighter than stock so your suspension reacts faster. This fiberglass fender is also available in carbon fiber. Ask one of our sales reps today.
(Image 1) 3ZX7R4B - 96/03 ZX7R SUPERBIKE TAIL BRAC
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R4B - 96/03 ZX7R SUPERBIKE TAIL BRAC
Kawasaki ZX7R Support bracket
This bracket mounts onto the subframe to support the rider weight when using our superbike seat (3ZX7R4SB).
(Image 1) 3ZX7R4SB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R4SB - 96/03 ZX7R SUPERBIKE TAIL SECTION
Kawasaki ZX7R Superbike seat
This is a one-piece race tail for your Kawasaki ZX7R. We’ve basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. It’s a super bike tail because the seat pan area is filled in and flat for use with close cell race padding, available here, instead of the stock upholstery. This is a race legal tail section for most racing organizations and is a cool tail section for custom street bikes. Get one today!
To support the rider weight you will need the under seat bracket that goes between the frame and the seat pan (3ZX7R4B).
(Image 1) 3ZX7RMRS - MUZZY RAPTOR RADIATOR SHROUD
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7RMRS - MUZZY RAPTOR RADIATOR SHROUD
Muzzy Raptor- radiator shroud
This radiator shroud is a cool piece that fits around the fork legs and helps direct air through the radiator instead of bleeding off over the top of it.
(Image 1) 3ZX7RMR3R - MUZZY RAPTOR FRONT DUCT-STREET
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7RMR3R - MUZZY RAPTOR FRONT DUCT-STREET
Air Duct Competition
This is the very distinctive front air duct assembly used on the Muzzy Raptors for the track.
(Also available in the original carbon fiber)
(Image 1) 3ZX7RMR3 - MUZZY RAPTOR ZX7R FAIRING DUCT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7RMR3 - MUZZY RAPTOR ZX7R FAIRING DUCT
Raptor Front Air Duct
This is the very distinctive front air duct assembly used on the Muzzy Raptors. The street version has the two indentions just behind the duct opening.
(Also available in the original carbon fiber)
(Image 1) 3ZX7RMR2 - MUZZY RAPTOR ZX7R RACE LOWER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7RMR2 - MUZZY RAPTOR ZX7R RACE LOWER
Raptor lower fairing-Street
This is a supersport lower fairing that pairs with our upper fairing.
(Image 1) 3ZX7RMR1C - MUZZY RAPTOR ZX7R RACE UPPER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7RMR1C - MUZZY RAPTOR ZX7R RACE UPPER
Raptor Race Upper fairing
This is a competition version of the Raptor fairing without headlight openings for racing.
(Image 1) 3ZX7RMR1 - MUZZY RAPTOR ZX7R STREET UPPER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7RMR1 - MUZZY RAPTOR ZX7R STREET UPPER
Raptor Street upper fairing
Street version of the upper fairing for the Muzzy Raptor.