ZX7R ’96-’03
Hey need bodywork for your ZX7R? Well look no further Air-Tech has what you need. Take a look at all we have to offer!
(Image 1) 3ZX7R4
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R4 - 96/03 ZX7R SUPERSPORT TAIL
Kawasaki ZX7R Supersport seat
This is a one-piece race tail for your Kawasaki ZX7R. We’ve basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. This tail is legal for most race organizations and really cool for custom street bikes. Street guys will cut the tail light hole and silicone in their tail light then mount it on their chassis for that race bike look. This is definitely the coolest tail section for the Kawasaki ZX7R out there. Get yours today!
(Image 1) 3ZX7R6F
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R6F - 96/03 ZX7R FIM AIRBOX 2 SNORKEL
Kawasaki ZX7R Airbox – FIM 2-snorkel
Want to make some extra horsepower for your Kawasaki ZX7R? Get one of our FIM Superbike pressurized air boxes. This airbox utilizes the regular two intakes and is our recommendation for a street bike. Comes with the duct trim.
(Image 1) 3ZX7R6A
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R6A - 96/03 ZX7R AMA AIRBOX 3 SNORKEL
Kawasaki ZX7R Airbox – AMA 3-snorkel
This is an AMA Superbike pressurized airbox for your Kawasaki ZX7R that brings air in from the standard right and left intake ducts and has a third snorkel that brings air in from between the top of the radiator and the bottom of the triple clamp. With this setup, the coils have to be relocated to properly fit the third intake. Comes with the duct trim. Not recommended for street use.
(Image 1) 3ZX7R9
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R9 - 96/03 ZX7R UNDERSEAT ENCLOSURE
Kawasaki ZX7R Undertail
Remove all that stock heavy black plastic and lighten up the back of your bike. This piece can be attached inside of your stock tail section or one of our race tails (requires trimming) and cleans up the inside bottom of your bike. This is a must have to finish off the underside of your bike.
(Image 1) 3ZX7R5
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R5 - 96/03 ZX7R FRONT FENDER
Kawasaki ZX7R Front fender
Direct replacement for the Kawasaki ZX7R front fender. Just drill the mounting holes, take off your heavy plastic piece, and install our lightweight fiberglass fender. This fender is lighter than stock so your suspension reacts faster. This fiberglass fender is also available in carbon fiber. Ask one of our sales reps today.
(Image 1) 3ZX7R4DB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R4DB - 96/03 ZX7R EXTENDED DRAG TAIL S/B
Kawasaki ZX7R Dragrace seat
Basically what we have here is our superbike seat that has been stretched 6 inches for drag race purposes. The front part of the seat drops straight onto the frame rails. The seat area is stepped for shifting position after the launch. Definitely a must have if you slammed and stretched your Kawasaki ZX7R.
(Image 1) 3ZX7R4B - 96/03 ZX7R SUPERBIKE TAIL BRAC
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R4B - 96/03 ZX7R SUPERBIKE TAIL BRAC
Kawasaki ZX7R Support bracket
This bracket mounts onto the subframe to support the rider weight when using our superbike seat (3ZX7R4SB).
(Image 1) 3ZX7R4SB
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R4SB - 96/03 ZX7R SUPERBIKE TAIL SECTION
Kawasaki ZX7R Superbike seat
This is a one-piece race tail for your Kawasaki ZX7R. We’ve basically molded the left and right seat sides, solo seat cowl, and tail light area as a one-piece unit. It’s a super bike tail because the seat pan area is filled in and flat for use with close cell race padding, available here, instead of the stock upholstery. This is a race legal tail section for most racing organizations and is a cool tail section for custom street bikes. Get one today!
To support the rider weight you will need the under seat bracket that goes between the frame and the seat pan (3ZX7R4B).
(Image 1) 3ZX7RWSB2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7RWSB2 - 96/03 ZX7R WORLD SUPERBIKE LOWER
Kawasaki ZX7R World Superbike lower fairing – bellypan w/ oil containment
This is the bottom half to our two-piece WSB fairing assembly. The right and left lowers, the front radiator shroud, and the oil containment belly pan are all molded as a one-piece unit. The upper and lower will split around the base gasket for easy access. This fairing is cut open on the left hand side for the Kawasaki ZX7R generators and does have a side stand provision.
This lower fairing only works with the matching upper fairing (3ZX7RWSB1).
(Image 1) 3ZX7RWSB1
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7RWSB1 - 96/03 ZX7R WORLD SUPERBIKE UPPER
Kawasaki ZX7R World Superbike upper fairing
Want to build a World Superbike replica? We got our hands on some cool WSB bodywork for the Kawasaki ZX7R and this is the upper we made! It’s got an endurance style single headlight (available separately, part# HL5) and comes with a little block off cover for mounting a number plate! For the cost of a couple of six packs we can also supply you with a little fiberglass headlight bucket that will allow easy installation into the fairing with some silicone.
(Image 1) 3ZX7R3
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R3 - 96/03 ZX7R LEFT LOWER
Kawasaki ZX7R Left lower fairing
This is an affordable replacement part for the expensive Kawasaki ZX7R lower fairing. Although our panel is identical in exterior size and shape to the Kawasaki piece, we do not do the inside tabs from the inner radiator guards. But hey, thats no big deal, people usually just silicone them in. A crafty guy can figure it out and save himself a ton of money over the stock Kawasaki piece. So replace that busted or scratched up bodywork for your ZX7R today.
(Image 1) 3ZX7R2
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R2 - 96/03 ZX7R RIGHT LOWER
Kawasaki ZX7R Right lower fairing
This is an affordable replacement part for the expensive Kawasaki ZX7R lower fairing. Although our panel is identical in exterior size and shape to the Kawasaki piece, we do not do the inside tabs from the inner radiator guards. But hey, thats no big deal, people usually just silicone them in. A crafty guy can figure it out and save himself a ton of money over the stock Kawasaki piece. So replace that busted or scratched up bodywork for your ZX7R today.
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
(Image 1) 3ZX7R1C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3ZX7R1C - 96/03 ZX7R COMPETITION UPPER
Kawasaki ZX7R Competition upper fairing
This is a very popular piece with track day riders because they can take off their stock upper fairing and headlight assembly and save their expensive pieces in case of a crash. Works with the stock lowers.