SV650 ’99-2002
The ’99-’02 SV650 is one of the neatest little bikes that Suzuki has ever introduced. Light, powerful, agile handling, definitely a cool bike! And Airtech designer Kent Riches has designed a lot of cool stuff for it!
We currently offer a quarter fairing, street and race S fairings, two different solo seat cowls, an under seat enclosure, a rear swing arm fender, and a awesome futuristic full fairing called the ATX for those that have to have it all.
Check out what we’ve designed for your bike and let us help you trick yours out!
One of our customers, Shane Liberty mounted the ATX race fairings on his second Gen SV650, then proceeded to make his own tail section. He said mounting the fairings was pretty straight forward with just a few mods:
– Trim a little corner out of the inside of the upper to allow for radiator clearance;
– Make two simple brackets and attach to motor mounts;
– Bend the ears of a Vortex race fairing stay;
– Shorten the back of the bellypan 1" to keep it well clear of the tire.
He also made a custom duct to route some more cool air to the radiator.
Doesn’t sound too bad and the result looks great – and completely original. You can find larger pictures of Shane’s bike in the customer gallery.
(Image 1) SVATX1R
(Image 2) SVATX1R - 99/02 SV650 ATX RACE FAIRING
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SVATX1R - 99/02 SV650 ATX RACE FAIRING
Suzuki SV650 ATX Race kit
There are thousands of GSXRs out there on the racetracks. We’ ve seen the SVs with GSXR fairings on them and quite honestly they look stupid! The GSXR is a four-cylinder bike, if you put that big fairing on your twin it will look huge! Don’ t take our word for it, go to the racetrack and see for your self. Our ATX-R fairing is a beautiful design and fits perfectly on an SV650. We simply filled in the headlight holes on our street version and made this race version. The bottom belly pan is already filled in for oil containment, so this is the perfect bodywork you need. It you want your bike to look like a GSXR or like everyone elses…… buy GSXR bodywork. If you want your race bike to look cool, awesome, and work aerodynamically, this is the bodywork you need! This race kit comes with an upper fairing, lower belly pan, and super sport tail. Bracket kit and replacement windscreen are available. Get yours today!
(Image 1) SVATX1 - 99/02 SV650 ATX FAIRING KIT
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SVATX1 - 99/02 SV650 ATX FAIRING KIT
Suzuki SV650 ATX full fairing kit
Airtech designer, Kent Riches, pulled out all of the stops in developing this radical body style for the SV650. This sleek upper fairing has dual DOT approved headlights, fresh air intake ducts on the sides, and swoopy windscreen. The belly pan is sexy, curvy, and heavily sculpted to bring a real European style look to your SV. The SVATX kit comes with and upper fairing, lower belly fairing, windscreen, headlights, headlight buckets, and mounting brackets. Hey, thousands of people have GSXRs but if you want a bike that is sexy, radical looking and different, then this is the body kit for you. People will be scratching their heads trying to figure out what it is…
(Image 1) SV69
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SV69 - 99/02 SV650 UNDERSEAT ENCLOSURE
Suzuki SV650 Under seat enclosure / undertail
This is the coolest under seat enclosure available for the Suzuki SV650. This retains your street legal DOT tail light assembly; no dangerously dim LED’ s here. It cleans up the under side of your bike. This is available in fiberglass so that you can do a custom color match to your bike, or in carbon fiber. Ask our sales reps for pricing today!
(Image 1) SV67
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SV67 - 99/02 SV650 SOLOSEAT COWL
Suzuki SV650 Solo seat cowl
This is a totally cool seat cowl for the SV650. This is the only cowl on the market that covers up the notches when you remove the grab bar in the back, and also covers up that black plastic piece.
This seat cowl mounts using the seat lock bracket that is on the bottom of the passenger seat. You can either purchase a spare from your Suzuki dealer or remove it from your passenger seat and transfer it to this new cowl.
This cowl lips over the back plastic by the tail light assembly and locks down with the seat lock. Simply pop the seat lock and remove the cowl off of the bike. Gives you more storage under the cowl. This is definitely the coolest cowl on the market. Get yours today!
(Image 1) SV66
(Image 2) SV66 - 99/02 SV650 REAR SWING ARM FENDER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SV66 - 99/02 SV650 REAR SWING ARM FENDER
Suzuki SV650 Rear swing arm fender
This is by far the coolest rear fender on the market for the SV650. Simply remove your plastic chain guard on the right side and install our swing arm fender on your bike. This fender is available in fiberglass, which you can custom paint to match your bike, or it is also available in carbon fiber. Call our sales reps for pricing today!
This is what your SV650 will look like with the rear hugger SV66, undertail SV69 and solo seat cowl SV67 installed. Looks super clean and a huge improvement over stock!
(Image 1) SV65
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SV65 - 99/02 SV650 FRONT FENDER
Suzuki SV650 Front fender
This is a direct replacement piece for the front fender of an SV650. Simply drill the mounting holes, paint, install, and go for a ride!
(Image 1) SV64
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SV64 - 99/02 SV650 SUPERSPORT SEAT
Suzuki SV650 Super sport race tail
This is the tail section, the solo seat cowl, and tail light area all molded together as a one-piece unit. This tail section is approved by most race organizations for competition use. Street bike guys love this because it is a cool one-piece design; they simply cut the tail light out of the back and mount it onto the chassis for a cool race look for your street bike. So whether you’ re racing your SV or want to trick it out, this tail section is exactly what you need!
(Image 1) SV61S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SV61S - 99/02 SV650S STREET FAIRING
Suzuki SV650 upper fairing – street
This is a lightweight and inexpensive replacement upper fairing for the SV650S. Although this fairing is identical in exterior shape to the Suzuki “S” fairing we do not do the internal tab work for the headlight or driving light. This is not a problem, you don’ t need them! Our tech department has figured out how you can mount this fairing and your headlight onto your chassis. Just ask them how! This will save you a ton of money! A crafty guy can mount this in less than an hour and save himself a considerable amount of money over the stock Suzuki piece. So replace that crash damaged busted bodywork and save yourself some dough with our inexpensive fiberglass piece today!
(Image 1) SV61C - 99/02 SV650S COMPETITION FAIRING
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SV61C - 99/02 SV650S COMPETITION FAIRING
Suzuki SV650 upper fairing – competition
This is a competition upper fairing for the SV650S model. This is basically the upper fairing with the headlight holes, driving light, and turn signals holes all molded in as a one-piece unit. This mounts onto the Suzuki chassis using all the stock SV brackets. This is real popular with track day guys since they can take off their expensive fairing and headlight, save them, and not worry about crashing and busting them. This is a cool fairing for street guys because they can do a custom headlight cut out on the front for that trick custom look.
(Image 1) SV61
(Image 2) SV61
(Image 3) SV61 - 99/02 SV650 1/4 FAIRING
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
SV61 - 99/02 SV650 1/4 FAIRING
SV650 Quarter fairing
This is quick and easy wind protection for the standard model Suzuki SV650. This cafe style headlight fairing mounts to your bike with a few simple brackets and offers great protection for the rider. This kit comes with the main fairing assembly, two stamped aluminum brackets (UB2) that attach to your headlight bolts, a smoke windscreen, and some windscreen screws.
The only thing you will need to fabricate is a simple zig zag bracket that screws to your brake splitter on the lower clamp that goes to the bottom of the fairing.
If you have any questions about installation feel free to ask our sales reps!
This is definitely the coolest quarter fairing available for the SV650. Get yours today!