SUZUKI GSXR 1100 '86-'88
Just call us the GSXR Fairings Warehouse. We've got everything you could possibly want for the first modern racer replica sport bike, the classic GSXR 1100.
Can you say GSXR 1100 fairings? We have a street upper with the headlight hole cut open or a competition upper with the left and right center sides molded onto it to form a one piece race fairing. There are also left and right sides of several types to choose from:
One style has the stock appearance; the other has three louvers that evacuate more air out of the radiator, which makes the bike run cooler.
The belly pan/lower fairing is a one-piece unit that is a breeze to install compared to the multi-piece stock setup.
We have a few GSXR 1100 tail sections to offer. One tail that incorporates the left and right side pieces, the tail light frame, solo seat cowl and license plate area in one seamless piece. This allows you to attach the seat and tail section in one swoop using the stock seat locks and the two 6mm fairing screws by the foot pegs. We also have the Limited Edition one-piece race seat. But wait, there's more! We make a solo seat cowl, a front number plate, cool air ducts to route cool air to the carburetor area, drag bike bodywork, a fuel tank, and even more. Really, there's no reason not to upgrade your bike, lighten it up, replace damaged bodywork, or just plain old customize the Bejesus out of it. Airtech can help make your bike's wildest dreams become a reality.
(Image 1) 2GSXR77
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR77 - 88/89 GSXR750 REAR FENDER N
Suzuki GSXR 1100 Rear fender
Replacement for the busted stock rear fender. This rear hugger mounts to the four vertical metal tabs on the swingarm.
Please note: Swingarm swaps are pretty common on these models so please look at the fender mounts on your swingarm.
If your swingarm has only one vertical tab and 3 inserts, use 90-92 rear fender 3GSXR77 which has 3 horizontal mounting tabs.
(Image 1) GSXR111
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR111 - 86-88 GSXR1100 UPPER - WIDE
Suzuki GSXR 1100 Street upper fairing
The turn signal holes have been filled in. This is a direct replacement fairing. Simply drill the mounting holes and mount onto your chassis. Replace your crash damaged bodywork with our lightweight fiberglass piece.
This fairing is identical to the GSXR 750 fairing except it's 1/2" wider at the bottom (fork opening measures 13" vs 12.5" on the 750). Also fitted to the 750 LTD model.
(Image 1) GSXR71C
(Image 2) https://www.airtechmoto.com/files/images/gsxr712-3.jpg
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR71C - 86/87 GSXR750/1100 RACE UPPER
Suzuki GSXR 750 upper fairing - competition
This is the race version of our GSXR71 upper fairing. The headlight opening has been filled in and the sharp edges around the opening were blended in for a softer more aerodynamic shape. Combine with stock mids or the 3-vent racing mids below. This fairing was designed for the 750 but will fit the 1100 with some minor adjustments.
(Image 1) GSXR71P
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR71P - 86/87 GSXR750/11 RACE UPPER W/MIDS
Suzuki GSXR 750 One-piece upper
This is a one piece race upper fairing for the GSXR. It is the upper fairing and the right and left side panels molded as a one-piece unit. The headlight holes and turn signal holes have been filled in for race use. Simply drill the mounting holes and mount it onto your chassis for a cool one-piece race look.
Works with stock bellypan or our one-piece GSXR76 bellypan (see below).
(Image 1) GSXR73
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR73 - 86/87 GSXR750/11 LEFT CENTER
Suzuki GSXR 750 Left Mid
This is a direct replacement panel for the GSXR left side mid panel.
(Image 1) GSXR74
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR74 - 86/87 GSXR750/11 RH VENTED CENTER
Suzuki GSXR 750 Right vented mid
This is a right side vented racing panel for your GSXR.
(Image 1) GSXR75
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR75 - 86/87 GSXR750/11 LH VENTED CENTER
Suzuki GSXR 750 Left vented mid
This a vented racing panel for the left side of your GSXR.
(Image 1) GSXR76
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR76 - 86/87 GSXR750/11 1 PIECE LOWER
Suzuki GSXR 750 Lower belly
This is the lower belly pan for your GSXR. This is the right and left side and the T section behind the tire all molded as a one-piece unit. This lightweight fiberglass piece replaces your crash damaged bodywork.
(Image 1) GSXR77
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR77 - 86/87 GSXR750/11 SUPER SPORT SEAT
Suzuki GSXR 750 Street tail
This is a one-piece race tail for the guys who want to have a passenger provision. This is the right and left seat sides and the right and left tail section all molded as a one-piece unit. This also uses your stock upholstery, and is a cool direct replacement for your crash damaged bodywork.
(Image 1) GSXR77S
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR77S - 86/87 GSXR750/11 OEM SEAT SIDES
Suzuki GSXR 750 Street tail
This is a one-piece race tail for the guys who want to have a passenger provision. This is the right and left seat sides and the right and left tail section all molded as a one-piece unit. This also uses your stock upholstery, and is a cool direct replacement for your crash damaged bodywork.
(Image 1) GSXR78
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR78 - 86/87 GSXR750/11 SEAT COWL
Suzuki GSXR 750 Solo seat cowl
This is a direct replacement cowling for your GSXR. Attach this to the rear part of your upholstery.
(Image 1) GSXR79
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR79 - 86/87 GSXR750/11 HEADLIGHT COVER
Suzuki GSXR 750 Number plate
This is a cool piece for track days or a custom headlight install. It covers up the stock headlight opening.
(Image 1) GSXR7RS - GSXR750/1100 REARSETS
(Image 2) GSXR7RS - GSXR750/1100 REARSETS
(Image 3) GSXR7RS - GSXR750/1100 REARSETS
- We fabricate each part to order. clear or tinted, in 14 different colors.
- Fabrication Lead Time UPDATE: Most windshield orders will ship within 2 weeks.
- We use the highest grade acrylic you can get your hands on.
- *This screen requires drilling or custom installation.
- Also includes a FREE ACRYLIC DRILL BIT AND PRACTICE PIECE!
- Of course, all products require installation once you receive. Common sense is also required.
GSXR7RS - GSXR750/1100 REARSETS
Suzuki GSXR 750 CNC Rearsets
Leave it up to Airtech to supply you with cool parts you can’t get anywhere else in the world! These race tested CNC rearsets are of the highest quality and will improve ground clearance, grip and shift action of your slabside GSXR750 or GSXR1100. Perfect for racing, track bike or hot rod street bike.
Rearset kit complete with:
– Thick, one-piece CNC rearset plates
– Grippy, knurled footpegs with Teflon end plug
– CNC brake and shift evers on dual bearings – smooth action
– Rubber tipped levers
– Frame mounting bolts and all other hardware, heim joints and shift rod
– Uses OEM master cylinder and shift link
– Regular or GP shift pattern
Please note:
These rearsets do not have the lower mounting points for OEM bodywork. You can make simple brackets and attach them to the back of the rearsets like Yoshimura used to do.
There is no brake light switch provision. You will need a switched banjo bolt to retain that function, available below, part# SWITCH4.
(Image 1) GSXR7YAD
(Image 2) GSXR7YAD
(Image 3) GSXR7YAD
(Image 4) GSXR7YAD
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR7YAD - YOSH AIR DUCTS (PAIR)
Suzuki GSXR 750 Yoshimura air duct
These Yoshimura cool air intake ducts can be installed in the upper fairing of your GSXR750 or GSXR 1100 as shown in the picture below. You will have to cut the opening and fiberglass, epoxy or rivet the ducts in place. We also carry matching smoothbore duct, click here. The ducts are 1.75″ OD.
(Image 1) GSXR7YFC
(Image 2) GSXR7YFC - YOSH FRAME COVERS (PAIR) 86-87
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
GSXR7YFC - YOSH FRAME COVERS (PAIR) 86-87
Suzuki GSXR 750 Yoshimura frame / carb covers
Check out these cool covers with the Yosh logo on them. Pure unobtanium, until now!