SUZUK IGSXR 750 '91-'92
How many ways are there to skin a Suzuki, young Grasshopper? Let us count the ways using a '91-'92 GSXR 750 as our guinea pig.
We could use the straight competition upper fairing on the race track or cut the headlight area out for street use. My son, we could even replace the stock headlights and turn signals with lightweight halogen projector beam lights and slick turn signal pods.
Of course we cannot forget the left and right center sections or the one piece belly pan that attaches underneath them. Or perhaps the fast-folk of the racetrack might want to use Airtech's special whole side panels, which can detach quickly either right side or left. Who needs a separate belly pan anyway?
There are a plethora of tail sections to choose from. There's a stock-appearing one piece tail section, a Yoshimura replica seat, a Yoshimura F1 seat, and a Yosh water-cooled model style seat.
We might want to use the inverted fork front fender or rear swing arm fender. Advanced skinners might want to take advantage of the pressurized air box or the lightweight sprint fuel tank.
(Image 1) 2GSXR710
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR710 - 88/92 GSXR750 YOSH FRAME CARB CVRS
Suzuki GSXR 750 Yoshimura carb covers
These carb covers are almost impossible to find, but we have them.
These covers are easily installed onto your chassis with zip ties (recommended) but we've seen velcro used too.
(Image 1) 2GSXR711
(Image 2) 2GSXR711
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR711 - 88/92 GSXR YOSH DRY CLUTCH DUC
Suzuki GSXR 750 Yoshimura dry clutch duct
Another hard to find Yosh part! This is the small Yoshimura dry clutch naca duct that routes cool air to the dry clutch - or standard clutch for that matter. Cut a small hole in your stock or race fairing and rivet this little piece in. Only available from Airtech!
(Image 1) 2GSXR74
(Image 2) 2GSXR74
(Image 3) 2GSXR74 - 88/92 GSXR750/1100 1 PIECE LOWER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR74 - 88/92 GSXR750/1100 1 PIECE LOWER
Suzuki GSXR 750 Lower fairing
This is the lower belly pan for your GSXR. This is the right and left side and the T-section behind the tire all molded as a one-piece unit. This lightweight fiberglass piece replaces your crash damaged bodywork.
(Image 1) 2GSXR74YR
(Image 2) 2GSXR74YR
(Image 3) 2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
(Image 4) 2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXR74YR - 88/92 YOSH REPLICA 1 PIECE LOWER
Suzuki GSXR 750 Yoshimura Lower fairing
This is a Yoshimura race belly pan for your GSXR. It is a one piece unit with a closed and extended bottom. Originally designed for the GSXR750 with a 4-1 race system, may require modification to work with your exhaust system especially on a GSXR1100.
Requires trimming around the kickstand for use on a street bike.
(Image 1) 2GSXRST
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
2GSXRST - 88/92 GSXR750/1100 SPRINT TANK
Suzuki GSXR 750 Fuel tank - Sprint
This is a slammed style race fuel tank for you GSXR. You can save quite a few pounds off the top of your bike with this lightweight fuel tank. It comes with one of our flush racing caps on the top and a 3/8" NPT bung in the bottom of the tank for use with a Pingel race valve.
(Image 1) 3GSXR72
(Image 2) 3GSXR72 - 90/92 GSXR750 RIGHT CENTER SIDE
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR72 - 90/92 GSXR750 RIGHT CENTER SIDE
Suzuki GSXR 750 Right Mid
This is a direct replacement panel for the right mid side of your GSXR.
(Image 1) 3GSXR73
(Image 2) 3GSXR73 - 90/92 GSXR750 LEFT CENTER SIDE
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR73 - 90/92 GSXR750 LEFT CENTER SIDE
Suzuki GSXR 750 Left Mid
This is a direct replacement panel for the GSXR left side mid panel.
(Image 1) 3GSXR77
(Image 2) 3GSXR77
(Image 3) 3GSXR77
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
3GSXR77 - 90/92 GSXR750 REAR FENDER
Suzuki GSXR 750 Rear fender
Replacement for the busted stock rear fender. This rear hugger mounts to one vertical tab and 3 inserts.
Please note: Swingarm swaps are pretty common on these models so please look at the fender mounts on your swingarm.
If your swingarm has four vertical metal tabs on the swingarm, use 88-89 rear fender 2GSXR77.
(Image 1) 4GSXR710
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR710 - 91/92 GSXR750/1100 U/SEAT ENCLOSUR
Suzuki GSXR 1100 Undertail
Look at that cool undertail. It will clean up the bottom of your tail tremendously.
(Image 1) 4GSXR71C
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR71C - 91/92 GSXR750 COMPETITION UPPER
Suzuki GSXR 750 Competition upper fairing
This is identical in exterior shape to the stock GSXR upper fairing with the exception that the headlight holes have been filled in for race purposes. Save your stock headlight and upper fairing and get one of these lightweight uppers for track days.
For street use, it is a simple matter of cutting out holes for thw stock headlights or some trick custom headlights.
(Image 1) 4GSXR72L
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR72L - 90/92 GSXR750 1PIECE RIGHT SIDE
Suzuki GSXR 750 Long lower fairing - right
This setup is a bit different from the stock upper-mid-lower setup. You simply bolt a set of these long lowers (one right, one left) onto the stock upper, and you're back on the road.
(Image 1) 4GSXR73L
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR73L - 90/92 GSXR750 1PIECE LEFT SIDE
Suzuki GSXR 750 Long lower fairing - left
This setup is a bit different from the stock upper-mid-lower setup. You simply bolt a set of these long lowers (one right, one left) onto the stock upper, and you're back on the road.
(Image 1) 4GSXR75
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR75 - 91/92 GSXR750/11 SUPERSPORT TAIL
Suzuki GSXR 750 Supersport race tail
This is a cool one-piece race tail for your GSXR. The taillight is molded in and would have to be cut out for street use. Works with the stock GSXR 750 upholstery
(Image 1) 4GSXR76
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR76 - 91/92 GSXR750/11 FRONT FENDER
Suzuki GSXR 750 Front fender
Straight replacement for your busted stock fender. Drill the mounting holes, bolt it up and go riding.
(Image 1) 4GSXR78
- We fabricate each fiberglass part to order.
- Fabrication Lead Time UPDATE: Most fiberglass orders will ship within 6 weeks.
- *This part requires CUSTOM installation.
- Cutting, Sanding, Drilling, AND PAINTING likely required.
- Of course, all products require installation once you receive. Common sense is also required.
4GSXR78 - 91/92 GSXR750/11 NUMBER PLATE
Suzuki GSXR 750 Number plate
This is a cool piece for track days or a custom headlight install. It covers up the stock headlight opening.